牧草抗旱机理与节水灌溉技术研究

在干旱、半干旱地区，牧草因长期处于亏水环境中，形成了一定的抗性，存在一个较宽的对水分利用相对较高的生理耗水阈值。木文从这一水分生理角度出发，在充分研究牧草生理生态适旱系列变化过程的基础上，确定了几种干旱半干旱草地的经济耗水量，并制定出相应的经济灌溉制度。     

厌氧氨氧化工艺在废水脱氮领域中的应用进展

厌氧氨氧化是一种全新的生物脱氮工艺。对于处理低碳氮比废水,与传统方法相比,它具有节省氧耗、无需外加有机碳源、污泥产量低等优点。近年来,随着基础研究的逐渐深入,各国学者开始将研究视角转向厌氧氨氧化工艺的实际应用。本文对该工艺在消化污泥上清液、垃圾渗滤液等实际废水脱氮研究中的进展进行了综述,并指出了目前存在的问题和今后的研究方向。     

重力式计量包装机的设计与研究

介绍了定量包装机的结构、气缸选型以及料仓容积等参数的计算。该机配以PLC气动控制装置、嵌入式电脑核心的包装机控制仪,具有高精度、高速度及长期工作可靠性好等特点。它可以和自动取袋、封口机配合使用,根据不同物料的料性及工艺要求,进行自动称重包装,从而满足了国内粮食及其初深加工产品计量包装的性能指标要求,并广泛应用于粮食、化工等行业。     

利用正交表优化设计自压式低压管灌系统

在渠灌区,研究充分利用地形落差情况下自压式低压管灌树状管网的优化设计,对降低投资有重要意义。管网优化设计应将管网布置优化和管径优化结合进行设计。本文利用正交表及其优化分析原理,同时结合应用非线性数学规划法优化管径,不仅可得到所有管网布置组合中的最优方案,还可视实际需要得到若干次优方案。该优化设计法计算工作量较小,简单可靠且实用。     

栽培槽大小对日光温室架式栽培番茄生长发育、水肥利用和产量品质的影响

利用封闭式循环供液高架栽培系统,研究了栽培槽大小(横切面宽度×深度:20cm×10cm,20cm×15cm,20cm×20cm)和钵栽(直径12cm×高10cm,基质容积1L)对架式栽培番茄(3穗果摘心)生长发育、水肥利用及产量品质的影响。结果表明:与钵栽相比,槽栽促进番茄植株生长,增加产量,但开花和采收时间延迟,果实品质下降,水肥利用效率降低;随着栽培槽体积的增大,植株生长旺盛,干物质积累量增加,但水肥利用效率降低,果实品质下降,不同大小栽培槽处理间水分利用效率和单株产量差异不显著。综合产量、品质及水肥利用效率等指标,番茄架式栽培槽大小以20cm×10cm为宜。     

中华五角海星体腔液蛋白质分离技术初探

运用聚丙烯酰胺凝胶电泳方法分析中华五角海星体腔液蛋白组分,探究低丰度蛋白样品的初步分离鉴定方法。研究结果表明,中华五角海星体腔液部分蛋白含量处于凝胶电泳的最小检测浓度范围。通过简易样品浓缩处理、上样前样品处理及电泳缓冲液选择等条件优化,实现了对此类量少,低丰度样品良好的分离效果。     

FLOODING STRESS: The Effects of Planting Pattern and Water Regime on Root Morphology,Physiology and Grain Yield of Rice

Field experiments were conducted over two growing seasons to investigate the effects of variations in water regime and planting pattern on the growth of rice plant roots and shoots and on yield. Four water regimes were evaluated with split plot design: intermittent flooding during the vegetative stage only (IF‐V); intermittent flooding extending into the reproductive stage (IF‐R); not flooded (NF); and continuously flooded (CF), interacting with three different planting patterns: single seedling per hill with wider 30 × 30 cm spacing (P1); single seedling per hill with closer 20 × 20 cm spacing (P2); and three to four seedlings per hill with 20 × 20 cm spacing (P3). The treatment combination CF/P3 corresponds most closely with current conventional practice. The other combinations were evaluated to contribute to a better understanding of the effects of the two parameters studied, respectively and together. IF‐V/P1 was considered as an approximation of System of Rice Intensification (SRI) practice. This study found that the combination of singly transplanted seedlings, both P1 and P2, with the IF‐V water regime improved root length density, root physiological activity, and chlorophyll content of the upper and lower leaves, leading to higher grain yield compared with the other treatment combinations. With continuous flooding (CF), P2 gave 23 % more yield compared with the P3 planting pattern. Combining IF‐V and P2 produced 32 % more grain yield compared with the CF/P3 treatment. These results showed a synergistic effect on grain yield from reduced intra‐hill competition and IF‐V water management. In these trials, there was no significant yield difference between the IF‐V/P1 and CF/P3 treatments. Wider spacing improved the performance of individual hills when grown under IF‐V water regimes, but tiller number per unit area remained a dominant determinant of yield. The yield reduction observed for CF/P1 compared with CF/P3 indicated that in more hypoxic CF soils, denser plant populations can produce more than sparser ones, whereas the latter benefit from more aerobic soil conditions. Intermittent irrigation during the vegetative growth stage and transplanting single seedlings/hill are major elements of SRI methodology. These findings contribute to an understanding of why SRI methods can produce the higher yields reported. A consideration of the effects of interaction between planting pattern and water regime shows the need to establish empirically the optimum values for these treatments according to varietal, soil and climatic characteristics for the greatest yield response.     

基于P300高性能BCI打字机的研究与实现

利用Gleeble-3800数字控制热/力模拟试验机研究了Q690低碳微合金钢在变形温度850~1150 ℃，应变速率0.01~30 s-1条件下的高温单道次压缩变形行为.建立了基于动态材料模型(DMM)的加工图，结合OM观察变形体微观组织确定了该钢种的高温热变形机制.结果表明：应变量0.7及以下的加工图中包含2个峰区(1 000~1 120 ℃，0.01~0.37 s-1和1 100~1 150 ℃，3.16~30 s-1)和3个加工失稳区(850~900 ℃，0.01~0.32 s-1和850~900 ℃，10~30 s-1以及1 000~1 085 ℃，1~30 s-1).应变量超过0.8的加工图包含2个峰区(1 025~1 100 ℃，0.01~0.38 s-1和1 100~1 150 ℃，3~30 s-1)，失稳区为低温(850~900 ℃，0.01~30 s-1)以及应变速率1 s-1以上的中低温度(850~1 100 ℃)范围，在这两个峰区峰值点附近的热变形显微组织为均匀的完全动态再结晶组织，因此，这两个区域均适合Q690钢的热加工变形.     

现代电子称重技术发展对森林收获计测的影响

回顾森林收获计测技术的发展历史,分析现代电子称量技术的发展应用前景,指出木材及木制品以体积计量计价的局限性和以重量计量计价的优势,认为当前一些木材市场上出现的买卖双方以重量而不是以材积计量计价现象有其历史必然性。基于以重量计量计价更为客观、准确、快捷、高效,并大幅降低成本的优势,其在纸浆等工业原料林经营、林业碳汇贸易等方面具有广泛应用潜力。