Shoot regeneration via direct organogenesis from in vitro derived leaves of mulberry using thidiazuron and 6-benzylaminopurine

A brief culture of mulberry leaves for 8–10 days on MS medium with 18.17 μM TDZ followed by transfer to 8.88 μM BAP supplemented medium triggered high frequency shoot organogenesis (77.6–89.2%) and favoured shoot elongation in Morus spp. Shoot proliferation was highest in the presence of 2.22 μM BAP with induction of 9.4–10.6 shoots per culture. High frequency of root induction (76.0–86.6%) was observed on medium supplemented with 0.49 μM IBA whereas increase in the level of IBA (4.92 μM) resulted in induction of roots along with development of callus from the base of the shoots. The regenerated plants established in soil at higher frequency in rainy season compared to winter and summer.     

Performance evaluation of venturi aeration system

The venturi aeration is an effective practice to increase the dissolved oxygen accessibility in the water bodies. This study aims to optimize the various geometrical parameters of the venturi aeration system. A non-dimensional technique was applied to find the optimum performance of various geometric parameters i.e. throat lengths (t_l), number of air holes (N), and converging and diverging angles (α and β). These experiments have been carried out using 1124 L capacity of tank having dimensions of 105 cm long, 105 cm wide and 102 cm deep. The experiments were conducted at a constant flow velocity of water (1.096 m/s) with varying throat length (t_l = 20–100 mm keeping 20 mm as interval between two consecutive length), number of air holes (N = 1–17 at an equal hole to hole distance of 5 mm between them), and converging and diverging angles (α and β = 10°, 15°, 20° and 25°). Multiple non-linear regression equations were also developed from the linear relation with the dependent variable (Non-dimensional form of standard aeration efficiency, NDSAE) and independent variables (t_l and N). With the geometrically optimized venturi aerator the optimum performance was found for t_l =100 mm, N = 17, and α and β = 15°. The maximum value of standard oxygen transfer rate (SOTR) and standard aeration efficiency (SAE) obtained was 0.0216 kgO₂/h and 0.611 kgO₂/kWh respectively. From the non-dimensional study, it was found that the NDSAE is the function Reynolds number (Re) and Froude number (Fr). The simulation equations were developed on the basis of Re and Fr for NDSAE, and subjected to 7.378 × 10⁻⁶ < Re < 3.689 × 10^-5 and 0.163 < Fr < 0.817, respectively.     

Soybean yield and yield components as influenced by the single and repeated flaming

Field experiments were conducted to study the impact of single and multiple flaming on crop injury, yield components, and yield of soybean. The goal of this experiment was to determine the number of the maximum flaming treatments which soybean could tolerate without any yield loss. The treatments consisted of a non-flamed control, and broadcast flaming conducted one time (at VC-unfolded cotyledon, V2-second trifoliate, and V5-fifth trifoliate), two times (each at VC and V2, VC and V5, and V2 and V5 stages), and three times (at VC, V2, and V5 stages) resulting in a total of eight treatments. All plots were kept weed-free for the entire growing season by hand hoeing. A propane dose of 50 kg ha⁻¹ was applied with torches parallel to the crop row and at an operating speed of 4.8 km h⁻¹ for all treatments. The response of soybean was measured as visual injury ratings (at 7 and 28 days after treatment – DAT) as well as effects on yield components and yield. Broadcast flaming conducted once (at VC or V5 stage), as well as twice (at VC and V5 stages) exhibited the lowest injury of about 8% at 28 DAT. Any treatment that contained flaming at V2 stage resulted in more than 70% injury at 28 DAT. The highest crop yields were obtained from the non-flamed control (3.45 t ha⁻¹) and the plots flamed once at VC (3.35 t ha⁻¹), V5 (3.32 t ha⁻¹), and two times at VC and V5 (3.24 t ha⁻¹), which were all statistically similar. Soybean flamed at V2 stage had lower yields (1.03 t ha⁻¹ at V2, 0.46 t ha⁻¹ at VC and V2, and 0.38 t ha⁻¹ at V2 and V5). The lowest yields were in soybean flamed three times (VC, V2, and V5 stages), which yielded only 0.36 t ha⁻¹. These results indicate that soybean could tolerate a maximum of two flaming treatments at VC and V5 growth stages per season without any yield reduction.     

Wildlife pests of California agriculture: Regional variability and subsequent impacts on management

Numerous wildlife species are known pests of California agriculture. Effective management of these pests is required to maximize agricultural production, yet it is unclear how the importance of various wildlife pest species and associated management strategies may vary regionally throughout California. Accounting for these regional differences should yield management programs that are specifically tailored to the regions constituents and should be considered when managing wildlife pests at a more localized level. Therefore, we developed a survey to provide quantitative data on regional differences in research and management needs to better guide future research efforts in developing more effective, practical, and appropriate methods for managing wildlife pests. We found that coyotes were a more common pest in the mountain region, ground squirrels were a greater concern in the central and desert valley region, while birds were most commonly listed as pests by individuals working in multiple regions of California. Coyote damage varied regionally, with livestock depredation the greatest concern throughout most of California, although damage to irrigation tubing and sprinklers was of equal concern in the central and desert valley region. For bird pests, exclusionary devices were the most common and most effective methods of control in the coastal region. Frightening devices were the most commonly used method for bird control in all other regions, although the efficacy associated with frightening devices was considered far lower than their level of use, suggesting that better management options are needed for bird control in these regions. For all wildlife pests, nonlethal control options (e.g., exclusionary devices, habitat modification) were generally preferred in the coastal region while lethal removal options ranked higher in the central and desert valley region (e.g., baiting, burrow fumigation). Efficacy was considered the most important attribute of a control method for all regions, while Integrated Pest Management programs were considered the most effective method for controlling wildlife pests in all regions except for the central and desert valley region. Collectively, the importance of wildlife pests and the perception of associated control methods varied throughout California and reflects the need to consider these regional differences in order to optimize damage management strategies at the regional level.     

Development of a vision-based automatic vaccine injection system for flatfish

Traditionally, flatfish vaccination has been performed manually a laborious and time-consuming, procedure with low accuracy. The handling requirement also makes it prone to contamination. With a view to eliminating these drawbacks, we designed an automatic vaccine system in which the injection is delivered by a Cartesian coordinate robot (also called a linear robot) guided by a vision system. The automatic vaccine injection system is driven by an injection site location algorithm that uses a template-matching technique. The proposed algorithm was designed to derive the time and possible angles of injection by comparing a search area with a template. The algorithm is able to vaccinate various sizes of flatfish, even when they are loaded at different angles. We validated the performance of the proposed algorithm by analyzing the injection error according to randomly generated loading angles. The proposed algorithm allowed an injection rate of 2000 per hour on average. Vaccination of flatfish with a body length of up to 500 mm was possible, even when the orientation of the fish was random. The injection errors in various sizes of flatfish were very small, ranging from 0 to 0.6 mm.     

Effects of cross-linking on mechanical and physical properties of agricultural residues/recycled thermoplastics composites

Maleated graft polyolefins as cross-linking agents (CAs) are widely used to improve properties of wood thermoplastic composites made by melt extrusion process. In this study, novel CAs, free isocyanate group (NCO)-terminated urethane pre-polymers (UPs) were synthesized and used in manufacturing wheat straw (WS)/recycled polyethylene (PE) composites. The composites using polymeric diphenylmethane diisocyanate (pMDI) as a CA were also made in comparison. The relationship between composite properties and the level of CA and its content as well as the composite density and hot pressing time were investigated based on wood based board processes. The results show that the internal bonding (IB) strength, the IB after soaked in boiling water for 2 h (2hWIB), the modulus of rupture (MOR), the modulus of elasticity (MOE) and the 24 h thickness of swell after absorption of water (24hTS) of the composites are significantly improved with increased CA contents and composite densities. The optimal hot pressing time is 1.1 min/mm at 180°C. The cross-linking function is attributed to the reaction between free NCOs of CA molecules with hydroxyls of WS and the moisture in the raw materials, as well as the interaction between weak polar chain segments in the CA molecules to the non-polar PE. It is highly feasible to manufacture high quality composite using WS and recycled PE as raw materials when cross-linked with just 2.5% of UPs.     

Evaluation of a pneumatic drop-on-demand generator for application of agrochemical solutions

A simple and robust monodroplet generator was constructed for drop-on-demand application of aqueous solutions of pesticides to crop plants and weeds. A short current impulse regulated the opening of a solenoid valve, allowing pressurised nitrogen gas to flow into a liquid chamber. Once a jet is released from the nozzle, one single droplet is detached, and the remaining part is retracted back into the cylinder as the excess gas is exhausted. The effects of the impulse width, pressure, diameter of the orifice, and the surface tension of the liquids as influenced by adjuvants were evaluated in terms of droplet diameter and generation potentiality. In general, increasing the impulse width and orifice diameter led to an increase in the droplet diameter. In contrast, increased pressure and reduced surface tension of the liquid led to a decreased diameter, although the effect was observed only at lower impulse widths and larger orifice diameters. With an optimum adjustment, we were able to generate monodroplets with diameters ranging from 533 to 1819 μm, although the range could be varied easily by changing the parameters.     

Improvement of quality and shelf-life of strawberries with edible coatings enriched with chitosan

Strawberry fruit have a very short shelf-life and senescent period due to their high degree of perishability and infection caused by several pathogens that can rapidly reduce fruit quality. The aim of this study was to determine the efficacy of carboxymethyl cellulose (CMC), hydroxypropylmethyl cellulose (HPMC) and composites with chitosan (CH) coatings on the shelf-life and overall quality of strawberry fruit. Strawberry fruit dipped for 2 min in solutions of CMC (1%), HPMC (1%), CMC (1%) + CH (1%) and HPMC (1%) + CH (1%) were stored at 11 ± 1 °C, 70–75% RH, while the uncoated fruit served as controls. Fruit coated with edible coatings showed significant delays in the change of weight loss, decay percentage, titratable acidity (TA), pH, total soluble solids (TSS) and ascorbic acid content as compared to uncoated control fruit. In addition, the edible coatings had a positive effect on maintaining higher concentrations of total phenolics and total anthocyanins, which decreased in control fruit due to over-ripening and senescence processes. Compared to the controls, all the coatings had positive effects on the inhibition of cell wall degrading enzymes and among all the tested coatings, CMC + CH and HPMC + CH was superior in inhibiting enzyme activity. These findings suggest that the use of CMC 1% + CH 1% and HPMC 1% + CH 1% coatings are useful for extending the shelf-life and maintaing quality of strawberry fruit.     

Bacterial community structure of nirK-bearing denitrifiers and the development of properties of soils in created mitigation wetlands

We investigated the abundance and genetic heterogeneity of bacterial nitrite reductase genes (nir) and soil structural properties in created and natural freshwater wetlands in the Virginia piedmont. Soil attributes included soil organic matter (SOM), total organic carbon (TOC), total nitrogen (TN), pH, gravimetric soil moisture (GSM), and bulk density (D_b). A subset of soil attributes were analyzed across the sites, using euclidean cluster analysis, resulting in three soil condition (SC) groups of increasing wetland soil development (i.e., SC1 < SC2 < SC3; less to more developed or matured) as measured by accumulation of TOC, TN, the increase of GSM, and the decrease of D_b. There were no difference found in the bacterial community diversity between the groups (p = 0.4). NirK gene copies detected ranged between 3.6 × 10⁴ and 3.4 × 10⁷ copies g⁻¹ soil and were significantly higher in the most developed soil group, SC3, than in the least developed soil group, SC1. However, the gene copies were lowest in SC2 that had a significantly higher soil pH (~6.6) than the other two SC groups (~5.3). The same pattern was found in denitrifying enzyme activity (DEA) on a companion study where DEA was found negatively correlated with soil pH. Gene fragments were amplified and products were screened by terminal restriction fragment length polymorphism (T-RFLP) analysis. Among 146 different T-RFs identified, fourteen were dominant and together made up more than 65% of all detected fragments. While SC groups did not relate to whole nirK communities, most soil properties that identified SC groups did significantly correlate to dominant members of the community.