大孔吸附树脂纯化黄花柳花总黄酮工艺研究

以黄花柳花为试材,采用紫外分光光度法,选择5种不同型号的树脂进行静态吸附试验,筛选出对其吸附解吸效性能高的树脂,再通过动态吸附与解吸试验研究上样浓度、树脂上样量、洗脱剂及流速等条件对黄花柳花总黄酮纯化效果的影响,优化维药黄花柳花总黄酮的大孔树脂纯化工艺。结果表明:AB-8型大孔吸附树脂对黄花柳花总黄酮具有较好的吸附解吸效果,最佳纯化条件为黄花柳花待纯化液浓度为3.13g/L,调节上样液pH 4.2,上样量5.5mL/g,以1.0mL/min流速上样,依次用10BV蒸馏水淋洗,6BV 70%乙醇以2.0mL/min流速洗脱,得纯化液。经AB-8纯化后的黄花柳花总黄酮纯度达51.99%。AB-8型大孔吸附树脂能有效提高黄花柳花中总黄酮纯度,并符合中药有效部位研究要求。     

紫花苜蓿种子吸胀期胚根线粒体AsA-GSH循环对低温胁迫的响应

为探究胚根线粒体抗坏血酸-谷胱甘肽(AsA-GSH)循环响应低温胁迫的抗氧化作用机制,以紫花苜蓿种子为材料,研究了不同温度(10和20℃)处理下发芽特性、不同吸胀时间(6、12和24 h)胚根线粒体AsA-GSH循环酶活性、抗氧化物以及过氧化氢(H₂O₂)含量的变化规律。结果表明,吸胀12和24 h后,10℃处理的胚根线粒体H₂O₂含量高于20℃。吸胀24 h期间,10℃处理的胚根线粒体谷胱甘肽还原酶(GR)活性均低于20℃。吸胀12和24 h后,10℃处理的胚根线粒体抗坏血酸(AsA)含量均低于20℃。10℃条件下吸胀24 h后,与20℃处理相比,胚根线粒体谷胱甘肽(GSH)含量显著降低(P<0.05)。苜蓿种子在10℃条件下吸胀萌发时,主要通过降低AsA-GSH循环中GR、单脱氢抗坏血酸还原酶(MDHAR)、过氧化物酶(POD)活性和AsA、GSH含量,使胚根线粒体内的H₂O₂积累,产生氧化损伤,继而影响种子萌发的正常进程。     

并联混合动力飞机牵引车控制系统设计与试验

分析了并联混合动力飞机牵引车的动力系统结构及工作模式,对目前主要的两种并联混合动力控制策略进行了分析比较,详细阐述了控制系统硬件及软件系统的设计方法,该控制系统在模拟工况测试试验中达到了预期的控制效果。     

用层次分析法决策喷灌规划设计方案

在喷灌工程规划设计过程中,正确地选用规划设计方案,实际是一个综合分析决策的过程。主要应考虑的因素中,有些可定量,有些则是无法定量的。如何对非定量因素作定量分析,进而对整个喷灌规划设计方案作出评价决策,层次分析法是解决这类问题简洁、有效、实用的方法。     

从土壤中分离棉枯萎病菌(Fusarium oxysporum f.sp.vasinfetum (Atk) Synder & Hansen)选择性培养基研究

本文介绍一种用于分离检测土壤中棉枯萎病菌的选择性培养基—植选2号。其成分为:KH_2PO_41g,MgSO_4·7H_2O 0.5g,K_2S_2O_50.2g,KCl0.6g,NH_4NO_3 0.5g,蛋白胨5g,山梨糖10g,蔗糖5g,琼脂20g,蒸馏水1000ml,PCNB 620mg,Oxgall1g,硫酸链霉素300mg,盐酸金霉素75mg。根据棉枯萎病在此培养基上的形态特征,能较容易地识别和检测该病菌。     

微波解冻与午餐肉罐头的生产

详述了首次在国内午餐肉罐头生产中采用的微波解冻系统科技成果的实施情况、系统操作与安全控制特点以及运行条件。探讨微波解冻技术支持下,无亚硝酸钠午餐肉罐头的生产工艺原理及其品质卓越的原因。     

石墨炉原子吸收光谱法测定新资源食品中的硒含量

建立一种简便、快速、准确的食品中硒的测定方法;检测新资源食品芝麻叶、野生四叶参、野生菜葛根、野生葛花及桑蚕蛹中的硒含量。用1mg·mL-1硝酸镍为基体改进剂,加入体积分数为0.1%TritonX-100和0.5%硝酸(1∶1),以改善样液的表面张力。用HITACHIZ-5000型石墨炉原子吸收光谱仪及全自动进样方法进行硒含量测定。石墨炉采用光控升温方式,硒的灰化温度按程序升温方式进行,程序升温分为干燥、灰化、原子化和净化。该方法的测定限为18.6μg/L,精密度为3.26%￣9.29%(RSD),加标回收率为92.1%￣108.8%。该方法具有测定简便、快速和准确等特点,可作为食品中硒含量测定的良好方法。     

Effects of Low- Intensity Ultrasound Treatment on Excess Sludge

In this study the influence of the low-intensity ultrasound treatment on excess sludge has been observed.The oxygen uptake rate(OUR),soluble chemical oxygen demand(SCOD),soluble total nitrogen(TN) and soluble total phosphorus(TP) were examined for three power levels of 0.03 W/mL, 0.05 W/mL and 0.1 W/mL as well as two time series of 0~5 min and 0~30 min.It showed that there were two stages of ultrasonic treatment: the first stage took place within the flocs in four minutes,in which SCOD,TN,TP were dissolved from flocs.In the second stage,the microbial activities have been strengthened,as well as OUR,TN,TP have increased greatly.     

From Lujiazui in Shanghai to New East Area in Chongqing--An exploration on Urban Land Use Form Oriented by the Public Traffic

To develop the public traffic and setup a city form coordinated with the development of the public traffic has become a common sense in the full achievement of the city sustainable development. Due to the particularity of the exploration procedure and some difficulties in urban development, the policy on developing public traffic has not been realized in our country. Now it is on edge to solve these problems, particularly in the new area of development. In this article, the authors intend to find a practical way of establishing a ciity development mode with adapting the public traffic development by contrasting Lujiazui new area in Shanghai and the new east area in Chongqing.     

Reuolution and Research of Green Automobile

The green is as a symbol of no pollution,no public harm and environmental protection. The green automobile is the inevitable results that the automobile technique continuously developes. A new style vehicle--the green automobile is the urgent solicit of environmental protection is developed. The automobile industry can develop continuously. This article mainly discusses the importance of the green auto_mobile's research and development,the development status in quo and prospect of the green auto_mobile technique in the world,and states the relationship between the green automobile technique and environmental protection from green technical system theoretically clarify the study of green automobile,including its design and the system,the manufacture and its technology,the energy,the rebuild engineering and a series of subjects. How to evaluate the cycle and the evaluable mark of the green automobile,the prospect of green automobile are pointed out.