早熟、高产转基因抗虫常规棉品种——湘K25

概述了湘K25的选育经过，介绍了湘K25的特征特性、产量、纤维品质和抗病、抗虫等特点，并总结了其关键栽培技术。     

气吸式覆膜精量油菜播种机排种性能试验与优化设计

针对目前高寒地油菜播种机普遍存在的重播漏播率高、人工劳动强度大、生长期缺水等问题，研究设计了一种气吸式精量播种机，一次性完成膜上播种、施肥、滴水灌溉、覆膜。分析了播种机主要结构、工作原理，对其关键部件进行结构设计，以排种盘转速、气吸室负压、排种盘型孔直径为试验因素，利用软件优化分析获得合理参数组合。结果表明：播种机排种盘转速197 r·min^-1、气吸室负压2.5 kPa、排种盘型孔直径1.2 mm时，田间播种合格率为93%、重播率3%、漏播率1%，播种质量较好。田间试验表明上述参数组合下排种器工作性能满足油菜播种机工作性能要求，该研究为油菜精密播种机的研究和设计提供了理论和技术参数。     

黔东南州打造全域森林公园的可行性研究

指出了建设全域森林公园是经济和社会发展的必然要求。在对黔东南州发展全域森林公园进行必要性和打造条件后认为:黔东南州在打造全域森林公园方面具有明显的政策优势,有着优良的森林生态环境资源,以及良好的林业产业基础等优势条件。通过不断完善相关的配套服务体系,已具备了打造全域森林公园的可行性。     

Dietary Lipid Levels Affect the Growth Performance,Lipid Deposition,and Antioxidative Capacity of Juvenile Scaleless Carp,Gymnocypris przewalskii,on the Qinghai‐Tibetan Plateau

A 56‐d growth trial was conducted to evaluate the growth performance, lipid deposition, and antioxidative capacity of juvenile scaleless carp, Gymnocypris przewalskii, on Qinghai‐Tibetan Plateau. One‐year‐old juveniles (initial weight: 15.99 ± 0.02 g) were fed practical diets with different lipid levels of 4, 5.5, 7, 8.5, and 10%, respectively. Results showed that the best specific growth rate (SGR), feed conversion rate, and total antioxidative capacity (T‐AOC) in hepatopancreas were observed in fish fed the diet with 7% lipid level. Fish fed with high lipid diets (8.5 and 10%) had significantly higher condition factor and viscerosomatic index as well as lipid in muscle, intestine, mesenteric fat tissue, and whole body. Highest level of hepatopancreas lipase and lipoprotein lipases activities as well as malondialdehyde content and the lowest level of feed intake and T‐AOC content in hepatopancreas and intestine were also observed in fish fed with high lipid diets (8.5 and 10%) (P < 0.05). In conclusion, based on SGR and hepatopancreas T‐AOC content, dietary lipid requirement of juvenile G. przewalskii was estimated to be 7.35 and 7.39%, respectively.     

Impact of weather variables and season on sporulation of Phytophthora pluvialis and Phytophthora kernoviae

Phytophthora pluvialis and Phytophthora kernoviae are the causal agents of important needle diseases on Pinus radiata in New Zealand. Little is known about the epidemiology of the diseases, making the development of control strategies challenging. To investigate the seasonality and climatic drivers of sporulation, inoculum traps, consisting of pine fascicles floating on water in plastic containers, were exchanged fortnightly at five sites in P. radiata plantations between February 2012 and December 2014. Sections of needle baits were plated onto selective media and growth of Phytophthora pluvialis and P. kernoviae recorded. To explore the generalizability of these data, they were compared to detection data for both pathogens from the New Zealand Forest Health Database (NZFHDB). Further, equivalent analyses on infection of Rhododendron ponticum by P. kernoviae in Cornwall, UK allowed the comparison of the epidemiology of P. kernoviae across different host systems and environments. In New Zealand, inoculum of P. pluvialis and P. kernoviae was detected between January–December and March–November, respectively. Inoculum of both species peaked in abundance in late winter. The probability of detecting P. pluvialis and P. kernoviae was greater at lower temperatures, while the probability of detecting P. pluvialis also increased during periods of wet weather. Similar patterns were observed in NZFHDB data. However, the seasonal pattern of infection by P. kernoviae in the UK was the opposite of that seen for sporulation in New Zealand. Phytophthora kernoviae was likely limited by warmer and drier summers in New Zealand, but by colder winter weather in the UK. These results emphasize the importance of considering both environmental drivers and thresholds in improving our understanding of pathogen epidemiology.     

马疱疹病毒1型主要毒力基因分析及TK基因缺失载体的构建

为了解新疆马疱疹病毒1型（EHV-1）主要毒力基因遗传进化情况并构建TK基因缺失株，本研究以EHV-1 XJ2015株DNA为模板，对其主要毒力基因TK、gI和gE全长进行克隆、测序及生物信息学分析，并扩增TK基因左右重组臂TKL和TKR，构建质粒pUC-TKLR，将扩增后的增强绿色荧光蛋白（EGFP，含有CMV+polyA）插入pUC-TKLR质粒，构建TK基因缺失打靶质粒。TK、gI和gE基因同源性分析结果显示，XJ2015株与国外EHV-1分离株TK、gI和gE基因同源性均较高，分别为99.8%~100.0%、99.6%~100.0%和99.9%~100.0%；与EHV-3分离株同源性均最低，分别为72.9%、59.4%和62.1%；遗传进化分析显示，3个基因均与国外EHV-1同属于一个遗传进化分支，与EHV-9和EHV-4进化关系较近，但与EHV-3进化关系较远，表明XJ2015毒株与国外EHV-1毒株TK、gI、gE基因核苷酸上差异不明显，没有明显的地域性特征，功能基因保守且进化缓慢，同源基因功能相同或相近；经PCR扩增、酶切、测序及转染鉴定，本试验成功构建了用于TK基因缺失的打靶质粒pUC-TKLR-EGFP。通过对EHV-1主要毒力基因的分析及TK基因缺失打靶载体的构建，为新疆地区马鼻肺炎流行病学调查分析、TK基因缺失株的构建提供理论依据。     

Innovating in less developed regions: What drives patenting in the lagging regions of Europe and North America

Not all economically disadvantaged—“less developed” or “lagging”—regions are the same. They are, however, often bundled together for the purposes of innovation policy design and implementation. This paper attempts to determine whether such bundling is warranted by conducting a regional level investigation for Canada, the United States, on the one hand, and Europe, on the other, to (a) identify the structural and socioeconomic factors that drive patenting in the less developed regions of North America and Europe, respectively; and (b) explore how these factors differ between the two contexts. The empirical analysis, estimated using a mixed‐model approach, reveals that, while there are similarities between the drivers of innovation in North America's and Europe's lagging regions, a number of important differences between the two continents prevail. The analysis also indicates that the territorial processes of innovation in North America's and Europe's less developed regions are more similar to those of their more developed counterparts than to one another.     

Backshoring and nearshoring: An overview

Increasingly, economies that have traditionally benefited from offshoring are losing some of their strategical advantages, with a consequent increase in backshoring by developed economies. This paper describes the phenomenon and tries to shed light on the current challenges, trends, and debates in the area, and on the main determinants of backshoring. A new phenomenon known as nearshoring is also analysed—this consists of relocating some previously offshored manufacturing activities so that they are now close to previous core locations, but not so close as to suffer from disagglomeration effects. This combines the advantages of offshoring and backshoring.