Effect of loading frequency on fatigue life and dissipated energy of structural plywood under panel shear load

Wood-based panels are subjected to cyclic panel shear load caused by wind and seismic forces in such an application as the sheathing of bearing walls. The fatigue behavior of structural plywood under panel shear load with two different loading frequencies was examined. Pulsating panel shear load with a triangular waveform and loading frequency of 0.5 or 5 Hz was applied to the plywood specimens. Stress−strain hysteresis loops were measured throughout the fatigue tests. Fatigue life was highly dependent on loading frequency at more than 0.5 stress level. The deterioration of mechanical property and damage accumulation in plywood specimen was observed to be slower at higher loading frequency at more than 0.5 stress level. Analyses based on energy loss suggest that panel shear load with higher loading frequency causes less damage to the plywood specimen during one loading cycle at higher stress level, and that the fatigue damage accumulation causing failure might be dependent on stress level although it seems to be unaffected by loading frequency. Based on these results, a new fatigue failure model for plywood specimen was qualitatively developed by combining Weibull’s weakest link model and Daniels’ fiber bundle model.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Fatigue of structural plywood under cyclic shear through thickness I: fatigue process and failure criterion based on strain energy

The fatigue behavior of plywood specimens under shear through thickness was examined on the basis of strain energy to obtain common empirical equations for the fatigue process and failure criterion under various loading conditions. Specimens were cut from commercial plywood panels of 9-mm thickness. Loading conditions were set as follows: a square waveform at a loading frequency of 0.5 Hz, a triangular waveform at 0.5 Hz, and a triangular waveform at 5.0 Hz. Peak stress applied was determined to be 0.5, 0.7, and 0.9 of static strength, that is, stress levels of 0.5, 0.7, and 0.9. The stress-strain relationships were measured throughout the fatigue test, and the strain energy was obtained at each loading cycle. Loading conditions apparently affected the relationship between stress level and fatigue life. On the other hand, the relationship between mean strain energy per cycle and fatigue life was found to be independent of loading conditions. Mean strain energy per cycle obtained as the fatigue limit was 5.85 kJ/m³ per cycle. Assuming that the accumulation of strain energy is a fatigue indicator, the fatigue process and failure criterion for the plywood specimens under the three loading conditions were commonly expressed by the relationship between cumulative strain energy and loading cycles.     

Vitamin D Status in Different Stages of Disease Severity in Dogs with Chronic Valvular Heart Disease

Background

In humans with heart disease, vitamin D deficiency is associated with disease progression and a poor prognosis. A recent study showed that serum 25‐hydroxyvitamin D [25(OH)D] concentration, the hallmark of vitamin D status, was lower in dogs with heart failure than in normal dogs, and a low concentration was associated with poor outcome in dogs with heart failure.

Objectives

To elucidate the vitamin D status of dogs with chronic valvular heart disease (CVHD) at different stages of disease severity.

Animals

Forty‐three client‐owned dogs with CVHD.

Methods

In this cross‐sectional study, dogs were divided into 3 groups (14 dogs in Stage B1, 17 dogs in Stage B2, and 12 dogs in Stage C/D) according to ACVIM guidelines. Dogs underwent clinical examination including echocardiography. Serum 25(OH)D concentrations were measured in each dog.

Results

Serum 25(OH)D concentration was significantly lower in Stage B2 (median, 33.2 nmol/L; range, 4.9–171.7 nmol/L) and C/D (13.1 nmol/L; 4.9–58.1 nmol/L) than in Stage B1 (52.5 nmol/L; 33.5–178.0 nmol/L) and was not significantly different between Stage B2 and Stage C/D. Among clinical variables, there were significant negative correlations between 25(OH)D concentration and both left atrial‐to‐aortic root ratio and left ventricular end‐diastolic diameter normalized for body weight.

Conclusions and Clinical Importance

These results indicate that vitamin D status is associated with the degree of cardiac remodeling, and the serum 25(OH)D concentration begins to decrease before the onset of heart failure in dogs with CVHD.     

Genetic analysis of fat‐to‐protein ratio,milk yield and somatic cell score of Holstein cows in Japan in the first three lactations by using a random regression model

We estimated the genetic parameters of fat‐to‐protein ratio (FPR) and the genetic correlations between FPR and milk yield or somatic cell score in the first three lactations in dairy cows. Data included 3 079 517 test‐day records of 201 138 Holstein cows in Japan from 2006 to 2011. Genetic parameters were estimated with a multiple‐trait random regression model in which the records within and between parities were treated as separate traits. The phenotypic values of FPR increased soon after parturition and peaked at 10 to 20 days in milk, then decreased slowly in mid‐ and late lactation. Heritability estimates for FPR yielded moderate values. Genetic correlations of FPR among parities were low in early lactation. Genetic correlations between FPR and milk yield were positive and low in early lactation, but only in the first lactation. Genetic correlations between FPR and somatic cell score were positive in early lactation and decreased to become negative in mid‐ to late lactation. By using these results for genetic evaluation it should be possible to improve energy balance in dairy cows.     

Identification of an allele attributable to formation of cucumber-like flavor in wild tomato species (Solanum pennellii) that was inactivated during domestication

Carbon 6 (C6)-aldehydes formed by fatty acid 13-hydroperoxide lyase (13HPL) specific to fatty acid 13-hydroperoxides (13-HPO) are important flavor constituents in fresh tomato fruits. C9-aldehydes are usually formed by 9/13HPL showing dual specificity to 9- and 13-HPOs and are scarcely found in tomato fruits. Mature red fruits of one of the introgression lines, IL1-4, generated by hybridization of a cultivated tomato (Solanum lycopersicon) to its wild relative Solanum pennellii, form high amounts of C9-aldehydes upon homogenization. The IL1-4 fruits showed high 9/13HPL activity. One of the genes isolated from IL1-4 showed a high similarity to plant 9/13HPLs. Recombinant proteins expressed in Escherichia coli showed 9/13HPL activity. Cleaved amplified polymorphic sequence analyses indicated that the gene was specific to IL1-4 and S. pennellii. S. lycopersicon had a gene having high similarity to the S. pennellii gene. It was absent in IL1-4. Among the differences of amino acid residues found between the two genes, a Cys to Ser exchange may be responsible for the inactivation of resultant protein product of S. lycopersicon gene because the Cys is an essential amino acid residue for HPL activity. From these observations, it could be assumed that a tomato gene corresponding to S. pennellii 9/13HPL gene had been inactivated through domestication of tomatoes.     

Monetary costs of dietary energy reported by young Japanese women: association with food and nutrient intake and body mass index

OBJECTIVE: Little is known about the relationship of monetary diet costs to dietary intake and obesity, particularly in non-Western populations. This study examined monetary cost of dietary energy in relation to diet quality and body mass index (BMI) among young Japanese women. DESIGN: Dietary intake was assessed by a validated, self-administered, diet history questionnaire. Diet costs were estimated using retail food prices. Monetary cost of dietary energy (Japanese yen 1000 kcal-1) was then calculated. BMI was computed from self-reported body weight and height. SUBJECTS: A total of 3931 female Japanese dietetic students aged 18-20 years. RESULTS: Monetary cost of dietary energy was positively associated with intakes of fruits, vegetables, fish and shellfish, and pulses; however, higher monetary cost of dietary energy was also associated with higher consumption of fat and oil, meat and energy-containing beverages, and lower consumption of cereals (rice, bread and noodles) (all P for trend <0.01). At the nutrient level, monetary cost of dietary energy was positively associated with intakes of dietary fibre and key vitamins and minerals, but also associated positively with intakes of fat, saturated fatty acids, cholesterol and sodium, and negatively with carbohydrate intake (all P for trend <0.0001). After adjustment for possible confounders, monetary cost of dietary energy was quite weakly but significantly negatively associated with BMI (P for trend = 0.0197). CONCLUSIONS: Increasing monetary cost of dietary energy was associated with both favourable and unfavourable dietary intake patterns and a quite small decrease in BMI in young Japanese women.     

Cell-cycle-dependent Colonization of Mouse Spermatogonial Stem Cells After Transplantation into Seminiferous Tubules

Spermatogonial stem cells (SSCs) migrate to the niche upon introduction into the seminiferous tubules of the testis of infertile animals. However, only 5–10% of the transplanted cells colonize recipient testes. In this study, we analyzed the impact of cell cycle on spermatogonial transplantation. We used fluorescent ubiquitination-based cell cycle indicator transgenic mice to examine the influence of cell cycle on SSC activity of mouse germline stem (GS) cells, a population of cultured spermatogonia enriched for SSCs. GS cells in the G1 phase are more efficient than those in the S/G2-M phase in colonizing the seminiferous tubules of adult mice. Cells in the G1 phase not only showed higher expression levels of GFRA1, a component of the GDNF self-renewal factor receptor, but also adhered more efficiently to laminin-coated plates. Furthermore, this cell cycle-dependency was not observed when cells were transplanted into immature pup recipients, which do not have the blood-testis barrier (BTB) between Sertoli cells, suggesting that cells in the G1 phase may passage through the BTB more readily than cells in the S/G2-M phase. Thus cell cycle status is an important factor in regulating SSC migration to the niche.