Cultivation effects on soil texture and fertility in an arid desert region of northwestern China

In arid desert regions of northwestern China, reclamation and subsequent irrigated cultivation have become effective ways to prevent desertification, expand arable croplands, and develop sustainable agricultural production. Improvement in soil texture and fertility is crucial to high soil quality and stable crop yield. However, knowledge on the long-term effects of the conversion of desert lands into arable croplands is very limited. To address this problem, we conducted this study in an arid desert region of northwestern China to understand the changes in soil physical-chemical properties after 0, 2, 5, 10, 17, and 24 years of cultivation. Our results showed that silt and clay contents at the 17-year-old sites increased 17.5 and 152.3 folds, respectively, compared with that at the 0-year-old sites. The soil aggregate size fraction and its stability exhibited an exponential growth trend with increasing cultivation ages, but no significant change was found for the proportion of soil macroaggregates (>5.00 mm) during the 17 years of cultivation. The soil organic carbon (SOC) content at the 24-year-old sites was 6.86 g/kg and increased 8.8 folds compared with that at the 0-year-old sites. The total (or available) nitrogen, phosphorus, and potassium contents showed significant increasing trends and reached higher values after 17 (or 24) years of cultivation. Changes in soil physical-chemical properties successively experienced slow, rapid, and stable development stages, but some key properties (such as soil aggregate stability and SOC) were still too low to meet the sustainable agricultural production. The results of this long-term study indicated that reasonable agricultural management, such as expanding no-tillage land area, returning straw to the fields, applying organic fertilizer, reducing chemical fertilizer application, and carrying out soil testing for formula fertilization, is urgently needed in arid desert regions.     

氨唑草酮的水解、挥发及其在水-沉积物系统中的降解特性

为评价氨唑草酮的环境安全性,参照国家标准GB/T 31270-2014的要求,采用室内模拟法研究了氨唑草酮在不同温度和不同pH值缓冲溶液中的水解特性、在不同环境介质中的挥发特性,以及在2种水-沉积物系统中的降解特性。结果表明:氨唑草酮在25 ℃时,在pH值为4或7的缓冲液中水解半衰期均长于365 d,在pH值为9的缓冲液中水解半衰期为90.0 d,属于难水解至中等水解农药。在20~25 ℃、气体流速500 mL·min^-1的条件下,氨唑草酮在空气、水和土壤中的挥发率均小于1%,属于难挥发农药。氨唑草酮在湖泊(杭州西湖)水-沉积物系统和河流(京杭大运河)水-沉积物系统中的降解符合一级动力学方程,好氧降解半衰期分别为408 d和630 d,厌氧降解半衰期分别为248 d和990 d,在水-沉积物系统中属于难降解农药。     

瑞丽山龙眼幼苗光合特性研究

使用Li-6400XT便携式光合仪测定高黎贡山南段2种环境(野外、大棚)下生长的我国特有种植物瑞丽山龙眼幼苗的光合特性,结果表明:(1)2种环境下生长的幼苗净光合速率(PN)日变化出现"双峰"曲线,有"午休"现象,但峰值出现的时刻与大小不同,野外幼苗在10:00、16:00出现高峰值,分别为4.608、2.118μmol/(m~2·s),大棚幼苗在11:00、15:00出现2个高峰值,分别为4.102、3.982μmol/(m~2·s);蒸腾速率(Tr)、气孔导度(Gs)变化趋势与净光合速率变化趋势一致,也有"午休"现象;水分利用率(WUE)无明显变化规律;胞间CO_2浓度(Ci)与净光合速率日变化相反。(2)净光合速率与环境因子偏相关性分析表明,环境因子:光合有效辐射(PAR)、大气CO_2浓度(Ca)、空气温度(Ta)、相对湿度(RH)对幼苗PN值影响均为:PARCaTaRH;(3)两地幼苗光饱和点(LSP)均较高,野外为2 674.995μmol/(m~2·s)、大棚幼苗为2 228.754μmol/(m~2·s),光补偿点(LCP)分别为38.250、8.322μmol/(m~2·s)。     

卵磷脂桶混助剂的特性及其在防治稻飞虱中对氟啶虫胺腈的协同增效作用

为明确新型卵磷脂类桶混助剂“融透”的特性，采用透射电镜和激光粒度分析仪表征了其物理性质，并通过室内生物测定和田间药效试验测定了其在防治稻飞虱中对氟啶虫胺腈的协同增效作用。结果表明，“融透”中含有圆形脂质体，Z平均粒径为129.5 nm。室内生物测定结果表明，“融透”可使氟啶虫胺腈对褐飞虱的毒力增加1.67倍。田间药效试验表明，“融透”可使氟啶虫胺腈对稻飞虱的防效提高9.04%~41.77%；当氟啶虫胺腈减量40%时，添加“融透”的处理对稻飞虱的防效与未添加“融透”的常量组相当。研究结果表明，卵磷脂桶混助剂“融透”可以通过形成脂质体提高药剂的利用率，从而达到增效的作用。     

不同处理方式对蒸谷米复水性的影响

以稻谷为原料,对蒸谷米的复水性进行了研究。通过单因素试验,探讨超高压浸泡工序、蒸煮工序、干燥工序中相关参数的影响规律,并以蒸煮时柠檬酸添加量、蒸煮次数、微波干燥时间为变量,成品复水率为指标,通过响应面分析建立回归方程,得出蒸煮次数对复水性影响最大,柠檬酸添加量次之,干燥时间影响最小。利用模型确定了较佳参数为柠檬酸添加量1.1%,微波干燥时间6.4 min,蒸煮次数3次。     

日光温室新型装配式骨架节点设计与有限元分析

为实现日光温室骨架的装配化,把控安装质量,提高温室骨架受力性能,设计完成了日光温室新型装配式骨架及装配式节点,以期为装配式日光温室提供新的研究思路.利用ANSYS Workbench软件建模辅助分析,比选外套管和内插管2种装配方式,在逐级均布荷载作用下主管和套管所受应力、剪力及弯矩情况;用Workbench软件分析装配式骨架在最不利荷载作用下轴向应力、剪力、弯矩及变形情况.结果 表明:骨架在外套管的装配方式下,主管及套管自身所受的轴向应力和弯矩更小,安全性更高.用外套管装配的三段桁架在最不利荷载组合作用下,最大轴向应力17.35MPa,最大变形量为0.26 mm,套管最大轴向应力5.0 MPa,最大剪力2345.3 N,最大弯矩为41.3N·m.该日光温室新型装配式骨架及装配式节点安全、稳定、变形量小,可推广使用.     

矾根主要品种的叶色表型性状分析

通过目测进行分类的方式很难准确界定矾根品种叶色。为建立一套更为科学的基于叶色表型的矾根品种分类体系,笔者利用色差仪对72个矾根品种共计432个样品的叶色进行测定,对获得的L、a、b 3个色度值进行聚类分析,将72个矾根品种分为褐色系、深绿色系、黄色系、灰绿色系、浅绿色系5类色系。对矾根品种各色系的L、a、b值进行相关性分析,发现叶片正面的L值与a值、a值与b值呈负相关,L值与b值呈正相关,但相关性不明显;叶片背面的L值与a值、a值与b值呈负相关,L值与b值呈显著正相关。从多重比较的结果中可以看出,矾根品种各色系之间的L、a、b色度值差异显著,尤其是各色系间叶正面的颜色差异较大,在矾根品种选育工作中,叶片正面的颜色将作为主要参考。     

The M43 domain-containing metalloprotease RcMEP1 in Rhizoctonia cerealis is a pathogenicity factor during the fungus infection to wheat

Wheat(Triticum aestivum L.) is an important staple crop for global human. The necrotrophic fungus Rhizoctonia cerealis is the causal pathogen of sharp eyespot, a devastating disease of wheat. Herein, we identified RcMEP1, a zinc metalloproteaseencoding gene from R. cerealis genomic sequences, and characterized its pathogenesis function. RcMEP1 expressed at markedly-high levels during R. cerealis infection process to wheat. The predicted protein RcMEP1 comprises of 287 amino acid residues and contains a signal peptide and a M43 metalloprotease domain harboring the active site motif(HEVGHWLGLYH). The assays of Agrobacterium tumefaciens-mediated transient expression in Nicotiana benthamiana leaves indicated that RcMEP1 is an apoplastic elicitor of cell death, and that the predicted signal peptide functions and is required for secretion and cell death-induction. The purified RcMEP1 protein and its M43 domain peptide were individually able to induce plant cell death and H2 O2 accumulation, and to inhibit expression of host chitinases when infiltrated into wheat and N. benthamiana leaves, while the M43 domain-deleting peptide and negative control lacked the capacity. Moreover, compared with the control pretreatment, the purified RcMEP1 protein or its M43-domain peptide resulted in enhanced pathogenesis in the inoculated wheat, whereas the M43 domain-deleting peptide failed. These results suggest that RcMEP1 acted as an important pathogenicity factor during R. cerealis infection to wheat and that its signal peptide and M43 domain are required for the secretion and pathogenesis of RcMEP1. This study provides insights into pathogenesis role of M43 domain-containing metalloproteases during R. cerealis infection to wheat.     

心尖锚的力学分析

设计了一种六齿镍钛合金锚钩用于封堵器等二尖瓣、三尖瓣返流修复系统的心尖固定,并对其力学特性进行研究.通过分析心脏结构及解剖数据,确定锚钩形状和可控尺寸设计变量,利用Solidworks建立锚钩3D模型,运用Abaqus软件对23个不同尺寸锚钩模型的入鞘过程进行有限元计算,分析锚钩入鞘过程中的最大入鞘力、最大冯米塞斯应变和入鞘轨迹的影响因素.制作了一种规格锚钩实物,与计算结果进行对比分析.结果表明:鞘部长度、鞘部角度及齿宽对应力、应变的影响最大,可以通过减小鞘部长度、鞘部角度及齿宽,有效降低最大应力、应变值;厚度、曲率半径及齿宽对入鞘力起到决定性作用,而根长和角度对入鞘力的影响很小;轴向刺入深度主要通过控制鞘部长度及鞘部角度来定义,径向刺入深度则由曲率半径的大小所决定.研究可为需心尖固定的心脏介入产品设计提供一定的借鉴意义.