Simulation of the penetration rate (ROP) of the air percussion drilling

It is difficult to calculate the penetration rate (ROP) of percussion drilling. In the early research, the empirical or semiempirical formulae of the ROP are derived from the laboratory or field data collected by the researchers. However, the ROP value of the formulae is not as accurate as that in the field. Benefiting from the dynamic model, the geometric structure model and the theory of the roller cone bit, the mathematical model of the hammer bit, the mathematical model of the true bottom hole and the mathematical model between the tooth and the rock of the hammer bit are established. Hence the ROP of the air percussion drilling can be predicted by simulation. Field tests show the models are reliable and the results are coincident with that in the field. The research can help to redesign the hammer bit and optimize the drilling parameters.     

Compensation of Dead Time Effects Based on the New Switching Strategy

The dead-time inserted into the switching signals of inverters case the dead-time effect of output voltage distortion. The influence of dead-time on output voltage in inverters is analyzed in detail, Then, a new switching strategy, which can provide excellent inverter output voltage distortion correction, is proposed. At last, the experiment results of inverter are presented to demonstrate the practicability and validity of the control strategy.     

COUPLING ANALYSIS METHOD FOR INTERACTION BETWEEN FOUNDATION WITH CAVERN AND FRAME STRUCTURE

In this paper,the interaction between foundation withcavern and frame structure is studied by the coupling methods of BEMand FEM.On the interface between the foundation and structure,thecoupling analysis needs to satisfy both the condition of displacementcompatibility and force equilibrum.A calculating program for two-dim-ensional problem is worked out in the computer,SIEMENS 7570C.Twoengineering examples are calculated and the results are compared withthose obtained by the comventional simplified method and with the observedresults from the engieering structures.It indicates that it is necessaryfor the weak rock foundation with shallow cavern,in the buried depth,to take the interaction into account.     

黄土高原北部垄膜沟植田间集雨高效栽培技术研究

在黄土高原北部,采用起垄覆膜(垄上覆膜种植马铃薯,垄沟种植谷子)的垄沟间作田间集雨补灌栽培并结合增施氮、磷、钾化肥,具有显著的增产、增收效果。该技术可大大提高化肥的增产效果和肥料利用率,有明显的集雨增墒效果,同时采用起垄覆膜种植马铃薯与垄沟种植谷子能够合理利用有限的工程集雨,有利于充分利用有限的降水资源,进行节约化农业经营。     

鄂尔多斯高原北部沙区主要植被类型下土壤要素的空间分析

鄂尔多斯北部沙区存在着极为显著的风沙地貌,在此格局基础之上,特别是在植被与土壤的相互响应过程中,二者的相互关系逐渐密切,这种反馈作用使得该区域的植被与土壤要素形成的空间分布格局具有一定的耦合性。研究这种关系可以为该地区保护植被和合理利用土地资源提供科学依据。     

棉花对红铃虫抗性及有关性状的遗传分析

1990～1991年选用对红铃虫抗性有显著差异的8个棉花稳定基因型,按第二种双列杂交方案分析棉花对红铃虫的抗性遗传行为,测试48个性状,结果表明:(1)侵入率和子害率的h_B中等,GCV较大;铃壳厚度、衣指和衣分的h_B较高,GCV也较大;铃壳致密度、单铃重和子指h_B较高而GCV较小;铃壳含水量等11个性状h_B中偏低,GCV也较小。(2)子指和绒长的GCA和SCA差异均显著,子仁丹宁含量的SCA差异显著而GCA不显著,子害率、铃壳含水量、子仁淀粉、单铃重、衣指、衣分、纤维比强度、伸长率和麦克隆值均为GCA差异显著而SCA不显著。(3)以83—82、7211、7209、1118和华棉101为亲本可提高后代的抗性。(4)铃壳的4个厚度性状、致密度、含水量、丹宁含量和子仁的类黄酮、总酚共9个理化性状与抗性至关,而遗传特点较好或中等,子害率与主要经济性状间的遗传相关系数多为较高正值。本文还就有关问题进行了讨论。     

水稻籽粒中内源多胺及其与籽粒充实和粒重的关系

以８个水稻品种（含杂交稻组合）为材料，研究了籽粒发育期内源多胺的含量及其与籽粒充实和粒重的关系。结果表明：籽粒中Ｐｕｔ（腐胺）、Ｓｐｄ（亚精胺）和Ｓｐｍ（精胺）的含量，强势粒高于弱势糕卫粒充实好的品种（组合）高于籽粒充实差的品种（组合），尤以Ｓｐｄ和Ｓｐｍ更明显；籽闰中Ｓｐｄ和Ｓｐｍ的含量或浓度，以及Ｓｐｄ／Ｐｕｔ和Ｓｐｍ／Ｐｕｔ的比值与谷粒充实率和千粒軎于极显著正相关在花后３天喷施外源多胺（１ｍ     

高产小麦品种模式化选育的初步研究

本文探讨了高产小麦品种理想模式的概念、特点和品种模式化选育的理论依据及优点。对37个亩产400公斤以上的高产品种的产量与其构成因素、形态性状、生理性状以及这些性状之间的关系进行了多元和简单相关分析。针对山东的生态条件和品种的现状，优化了亩产600-650公斤的品种模式。探讨了各类性状间的有机联系和协调发展产量潜     

半夏小块茎的形态发生及人工种子制作

离体培养中，经过小块茎发生途径从半夏叶柄诱导了完整植株。用实体解剖、连续切片和三维结构重组等方法观察分析得出：小块茎顶端的叶原基由于不对称生长逐渐将顶端分生组织复盖，随后叶原基的尖端和两侧生长延缓，生长中心转移到背轴面中央，结果导致叶原基长帽状结构。不同发育程度的雏叶和叶原基总是相互叠在一起顶端分生组织复盖于下面。小块茎枯端形成芽的同时，在顶芽附近分化根。     

山西地膜棉花高产优质综合农艺措施数学模型的研究

本文采用五因素五水平二次回归旋转设计的方法，研究了山西不同生态棉区皮棉产量与密度、氮、磷、钾施肥量及化控次数（用量）关系的数学模型。分析了不同因素的影响效应，明确了各栽培措施的主次。通过模拟进优待选了不同产量等级的优化农艺措施组合方案，为不同生态棉区制定棉花高产优质决策方案提供依据。