Improved high-performance liquid chromatography method to determine theobromine and caffeine in cocoa and cocoa products

At present, the commonly used HPLC method for the analysis of caffeine and theobromine contents in aqueous cocoa extracts employs direct application of the extracts on the column. This practice gradually reduces the efficiency of the column and shortens its life. Also, this method gives inflated values due to interfering substances and difficulty in achieving baseline resolution. In the improved method, the interfering cocoa pigments are effectively removed by passing the aqueous extract through a Sep-pak C(18) cartridge. Subsequent injection on a C(18) reverse-phase column employing acetonitrile and water (20:80) as the mobile phase reduces the analysis time without affecting either resolution of the peak or the accuracy of caffeine and theobromine determination or achieving baseline resolution. Therefore, this method is ideally suited for rapid routine analysis of cocoa and its products.     

Moisture-dependent physical properties of jatropha fruit

The physical properties of fruit are important in designing and fabricating equipment and structures for handling, transporting, processing and storage, and also for assessing quality. The study was conducted to investigate some physical properties of jatropha fruit at various moisture levels. The average length, width, thickness and 1000 mass were 29.31 mm, 22.18 mm, 21.36 mm and 1522.10 g, respectively, at moisture content of 7.97% d.b. The geometric mean diameter increased from 24.03 to 24.70 mm and the sphericity varied between 0.82 and 0.83 as moisture content increased from 7.97% to 23.33% d.b., respectively. In the same moisture range, the bulk and true densities decreased from 278 to 253 and 546 to 435 kg m^?3, respectively, whereas the corresponding porosity also decreased from 49.08% to 41.84%. As the moisture content increased from 7.97% to 23.33% d.b., crushing strength was decreased from 275 to 79 N, whereas the angle of repose and surface areas were found to increase from 36.41° to 41.72° and 1815.73 to 1917.59 mm², respectively. The static coefficient of friction of jatropha fruit increased linearly against the surfaces of three structural materials, namely plywood (47.81%), mild steel (62.88%) and aluminium (34.82%) as the moisture content increased from 7.97% to 23.33% d.b.     

Moisture-dependent physical properties of jatropha seed (Jatropha curcas L.)

The study was conducted to investigate some moisture-dependent physical properties of jatropha seed namely, seed dimension, 1000 seed mass, surface area, sphericity, bulk density, true density, angle of repose and static coefficient of friction against different materials. The physical properties of jatropha seed were evaluated as a function of moisture content in the range of 4.75–19.57% d.w. The average length, width, thickness and 1000 seed mass were 18.65 mm, 11.34 mm, 8.91 mm and 741.1 g, respectively at moisture content of 4.75% d.w. The geometric mean diameter and sphericity increased from 12.32 to 12.89 mm and 0.66 to 0.67 as moisture content increased from 4.75 to 19.57% d.w., respectively. In the same moisture range, densities of the rewetted jatropha seed decreased from 492 to 419 kg m⁻³, true density increased from 679 to 767 kg m⁻³, and the corresponding porosity increased from 27.54 to 45.37%. As the moisture content increased from 4.75 to 19.57% d.w., the angle of repose and surface area were found to increase from 28.15° to 39.95° and 476.78 to 521.99 mm², respectively. The static coefficient of friction of jatropha seed increased linearly against the surfaces of three structural materials, namely plywood (44.12%), mild steel sheet (64.15%) and aluminum (68.63%) as the moisture content increased from 4.75 to 19.57% d.w.     

Studies on the antioxidant activities of natural vanilla extract and its constituent compounds through in vitro models

Vanilla extract was prepared by extraction of cured vanilla beans with aqueous ethyl alcohol (60%). The extract was profiled by HPLC, wherein major compounds, viz., vanillic acid, 4-hydroxybenzyl alcohol, 4-hydroxy-3-methoxybenzyl alcohol, 4-hydroxybenzaldehyde and vanillin, could be identified and separated. Extract and pure standard compounds were screened for antioxidant activity using beta-carotene-linoleate and DPPH in vitro model systems. At a concentration of 200 ppm, the extract showed 26% and 43% of antioxidant activity by beta-carotene-linoleate and DPPH methods, respectively, in comparison to corresponding values of 93% and 92% for BHA. Interestingly, 4-hydroxy-3-methoxybenzyl alcohol and 4-hydroxybenzyl alcohol exhibited antioxidant activity of 65% and 45% by beta-carotene-linoleate method and 90% and 50% by DPPH methods, respectively. In contrast, pure vanillin exhibited much lower antioxidant activity. The present study points toward the potential use of vanilla extract components as antioxidants for food preservation and in health supplements as nutraceuticals.     

Time dependence of hydraulic parameters estimation from transient analysis of mini disc infiltrometer measurements

The transient analysis of mini disc infiltrometer (MDI) measurements is an established method for characterising near-surface hydraulic characteristics of soils. The reliability of hydraulic characteristics obtained from transient analysis depends on the (1) adequacy of model, (2) adequacy of data, (3) measurement time and (4) measurement footprint. The measurement time dependence recommendations are reported only for a few soil textures, initially wet samples and tension infiltrometer (TI) with a higher measurement footprint than the MDI. This study investigated the adequacy of infiltration data (using cumulative linearization [CL] and differentiated linearization [DL]) and measurement time influence on the hydraulic parameters determined from the transient analysis of MDI measurements for six soil textures. The objective of the study is to identify suitable MDI measurement durations for different soil textures for the initially dry state, considering both adequacy of data and time fractionation (measurement time influence). The data adequacy time obtained from the DL (T_DL) was found to be 0.8 times less than the value obtained from CL (T_CL). The marginal difference in T_DL and T_CL had a significant influence on the determination of infiltration equation coefficient C₁ and negligible influence on coefficient C₂. The time fractionation procedure adopted for identifying adequate MDI measurement time (T_m) was found to be comparable based on sorptivity (S₀) and hydraulic conductivity (K₀). The average T_m was also comparable with T_DL and T_CL with a strong positive correlation. The C₂ values obtained based on T_m, T_DL, and T_CL were in better agreement than the corresponding C₁ values. The adequate MDI measurement times identified by considering T_m, T_DL, and T_CL were texture dependent, ranging from 45 min for silt to 120 min for silt loam and silty clay loam. For loamy sand, it was 50 min; for sand, it was 70 min, followed by 60 min for loam.     

Assessment of enzyme linked immunosorbent assay based diagnostic kits (Toxokit-G and Toxokit-M) for the detection of IgG and IgM antibodies to Toxoplasma gondii in human serum

An enzyme linked immunosorbent assay (ELISA) using penicillinase was developed in the form of diagnostic kits (Toxokit-G and Toxokit-M) for the detection of IgG and IgM antibodies to Toxoplasma gondii. The performance of both the kits was compared with commercially available diagnostic kits, i.e. Enzygnost-Toxoplasmosis/IgG (Behring Co., Germany), TOXOTEK-G (Flow Lab., U.K.) and Toxoplasma IgM Microassay (Diamedix Corp., U.S.A.) by testing toxoplasma-suspected human serum samples. The results indicate a good reliability between these diagnostic kits. Toxokit-G has 86.66 and 96.05% sensitivity and specificity respectively. The main advantage of Toxokit-G is that the end result can be assessed visually without using sophisticated instruments. Toxokit-M has 100% sensitivity and specificity and test results were not affected by the presence of antitoxoplasma IgG antibodies, rheumatoid factor or antinuclear antibodies.     

Chromosome pairing within genomes in maize-Tripsacum hybrids

When the ten chromosomes of maize were inserted inlto a polyploid (2n = 72) Tripsacum dactyloides background they formed up to five pairs at meiosis. Two plants that each contained 36 Tripsacum and 14 maize chromosomes were deprived from the F(1) of maize x Tripsacum. Chromo. somes of these plants frequently formed 25 bivalents, 18 between Tripsacum chromosomes and seven between maize chromosomes. Maize chromosomes could be distinguished from Tripsacum chromosomes on the basis of size. The withint-genome pairing is probably induced by the genetic background.     

A study of the gaseous and particulate pollutants in the environment of a thermal power plant project area

Observations on gaseous and particulate pollutants were undertaken at four locations in the region of a thermal power plant (TPP), which is under construction at Tuticorin, south India. The predicted concentrations Of SO₂ due to the emissions from the TPP and its possible impact on the inhabitants and climate in the downwind region were evaluated. Also, the predicted concentrations downwind of a Petrochemical Industrial Complex (PIC) located in the vicinity of the TPP were computed and compared with the measured concentrations. The predicted maximum concentration of SO₂ at 6 km downwind of TPP is about 530 μg m^?3 under most favourable wind conditions. The anticipated increase in SO₂ due to the thermal power plant under construction may therefore be substantial. The predicted concentrations Of SO₂, at a distance of 1.8 km downwind of the PIC, varied between 34 and 216 μg m^?3 for wind directions ranging from 70 to 90° and for Pasquill stability category C. The plume would be over the observational site when the wind direction is 80°. The maximum measured concentration was 23 ug m^?3. The discrepancy was due to the rapid fluctuations in the wind direction during the observational period over a wide range from 20 to 90°.     

Precipitation chemistry at sinhagad-a hill station in India

The chemistry of precipitation in remote sites such as mountain tops is of interest in the study of atmospheric pollution and acid rain. The chemical composition measured at mountain site which is away from industrial and urban areas is useful as a reference level and it allows to determine the extent of anthropogenic contamination. Hence, rain water samples were collected at Sinhagad (18°21N, 73°45E, 1450 m asl during the monsoon season (June-September) of 1992 and were analysed for major ions. The precipitation samples collected at Sinhagad were alkaline in nature and pH values ranged between 5.9 to 6.76. The ionic composition was dominated by soil dust The concentration of Ca²⁺ was highest among all the ions. The concentrations of excess SO₃ ^2– and NO₄ ^– were small (23.8 and 15.2 eq l^–1 respectively) compared to the values of polluted regions in India. The correlation coefficient between the ions and pH values was calculated and it was found to be maximum in case of Ca²⁺. Precipitation samples collected at Sinhagad were alkaline owing to higher concentration of Ca²⁺ and lower levels of acidic pollutants (SO₄ ^2– and NO₃ ^–).     

Observations of Aitken nuclei and trace gases in different environments in India

Surface measurements of Aitken nuclei have been made at a few representative environments in India. The periods of measurements have ranged from a few days to a few years depending upon the place of measurement. Aircraft measurements of Aitken nuclei were made at one of the locations during three successive monsoon periods. During part of the time simultaneous measurements were made of the trace gases SO₂, NH₃, NO₂, and O₃. The study presents the seasonal and diurnal variation of Aitken nuclei in the different environments and their association with the trace gas concentrations.