土壤铅和镉溶出伏安法检测中影响因素及其削弱方法研究进展

溶出伏安法具有分析速度快、成本低、灵敏度高等优点被广泛应用于检测土壤重金属含量，但在检测土壤重金属时，溶出伏安检测精度会受到多方面因素的影响。该文在介绍溶出伏安法工作原理的基础上，从伏安参数、试验条件和土壤物质成分三方面阐述溶出伏安法检测土壤Pb2+和Cd2+为的影响因素，解析各因素的影响机理，归纳影响削弱方法的研究进展。研究结论为：方波脉冲阳极溶出伏安法最常用于检测土壤Pb2+和Cd2+，伏安参数包括脉冲幅值、电压增量和脉冲频率，试验条件包括沉积时间、沉积电压和支持电解质种类及其pH值，土壤成分主要干扰因素包括非目标重金属和有机质。针对伏安参数和试验条件的影响可以设计优化试验有效削弱。针对非目标重金属和有机质的干扰影响，目前研究还没有提出有效的削弱方法。最后，展望了溶出伏安法检测土壤重金属的未来发展方向。     

有色金属材料在汽车上的应用现状与展望

综述了有色金属的性能特点及当今世界汽车工业中有色金属的应用与展望,阐明汽车有色金属化是汽车轻量化的主要途径.汽车轻量化后可以有效地节约能源和减少环境污染.     

铅、镉和铬在叶类蔬菜中的累积及对其生长的影响

 研究结果表明: 重金属元素铅(Pb) 、镉(Cd) 、铬(Cr) 对几种叶类蔬菜生长和产量都有明显的影响, 且其影响因蔬菜种类、元素种类和浓度的不同而有很大差异, 叶用莴苣> 苋菜> 芥菜> 菜薹>蕹菜, Cr > Cd > Pb ; 不同蔬菜类型可食部位积累重金属元素的顺序为苋菜> 叶用莴苣> 菜薹> 蕹菜> 芥菜;各元素从营养液向蔬菜体内转移的迁移累积率顺序为Cd > Cr > Pb。随着各元素浓度的增大, 对蔬菜生长的影响和其可食部分的富集量随之加大。     

Determination and Analysis of Heavy Metal Content in the Soil from Beef Cattle Farms in Three Regions of Xinjiang

In order to study and evaluate the feeding environment of the beef cattle farms in Xinjiang, the contents of heavy mentals in the soil from 8 beef cattle farms in Xinjiang Aksu, Yili and Tacheng regions were tested according to the Field of Livestock and Poultry Environment Quality Standard (NY/T 388—1999).The atomic absorption spectroscopic method was used to determine the contents of As, Hg, Pb, Cd, and Cr.The mean contents of As, Hg, Pb, Cd, and Cr in 8 beef cattle farms soil were 0.389, 0.568, 22.708, 0.573 and 149.449 mg/kg, respectively, and they were all below the upper limit of NY/T 388—1999.The comprehensive heavy metal pollution index of 8 beef cattle farms were 0.577 to 0.994, and the index were 0.7 to 1 of two observation points in Yili and one observation point in Tacheng.The soil environment quality of these 3 farms were at the level of slight cleaning.The comprehensive heavy metal pollution index of other five observation points were ≤0.7, the soil environment was in a clean level.The soil environment of beef cattle farms in these three regions conformed to the standards of livestock for environment quality and safe products.     

Sewage sludge processing determines its impact on soil microbial community structure and function

Composting and thermal drying are amongst the most commonly used post-digestion processes for allowing sanitation and biological stabilization of sewage sludge from municipal treatment plants, and making it suitable as soil conditioner for use in agriculture. To assess the impact of sludge-derived materials on soil microbial properties, fresh (LAF), composted (LAC) and thermally dried (LAT) sludge fractions, each resulting from a different post-treatment process of a same aerobically digested sewage sludge, were added at 1% (w/w) application rate on two contrasting (a loam and a loamy sand) soils and incubated under laboratory conditions for 28 days. Soil respiration, microbial ATP content, hydrolytic activities and arginine ammonification rate were monitored throughout the incubation period. Results showed that soil biochemical variables, including the metabolic quotient (qCO₂), were markedly stimulated after sludge application, and the magnitude of this stimulatory effect was dependent on sludge type (precisely LAT > LAF > LAC), but not on soil type. This effect was related to the content of stable organic matter, which was lower in LAT. Genetic fingerprinting by PCR–DGGE revealed that compositional shifts of soil bacterial and, at greater extent, actinobacterial communities were responsive to the amendment with a differing sludge fraction. The observed time-dependent changes in the DGGE profiles of amended soils reflected the microbial turnover dependent on the sludge nutrient input, whereas no indications of adverse effects of sludge-borne contaminants were noted. Our findings indicate that composting rather thermal drying can represent a more appropriate post-digestion process to make sewage sludge suitable for use as soil conditioner in agriculture.     

Community structure of arbuscular mycorrhizal fungi associated with Robinia pseudoacacia in uncontaminated and heavy metal contaminated soils

The significance of arbuscular mycorrhizal fungi (AMF) in soil remediation has been widely recognized because of their ability to promote plant growth and increase phytoremediation efficiency in heavy metal (HM) polluted soils by improving plant nutrient absorption and by influencing the fate of the metals in the plant and soil. However, the symbiotic functions of AMF in remediation of polluted soils depend on plant–fungus–soil combinations and are greatly influenced by environmental conditions. To better understand the adaptation of plants and the related mycorrhizae to extreme environmental conditions, AMF colonization, spore density and community structure were analyzed in roots or rhizosphere soils of Robinia pseudoacacia. Mycorrhization was compared between uncontaminated soil and heavy metal contaminated soil from a lead–zinc mining region of northwest China. Samples were analyzed by restriction fragment length polymorphism (RFLP) screening with AMF-specific primers (NS31 and AM1), and sequencing of rRNA small subunit (SSU). The phylogenetic analysis revealed 28 AMF group types, including six AMF families: Glomeraceae, Claroideoglomeraceae, Diversisporaceae, Acaulosporaceae, Pacisporaceae, and Gigasporaceae. Of all AMF group types, six (21%) were detected based on spore samples alone, four (14%) based on root samples alone, and five (18%) based on samples from root, soil and spore. Glo9 (Rhizophagus intraradices), Glo17 (Funneliformis mosseae) and Acau3 (Acaulospora sp.) were the three most abundant AMF group types in the current study. Soil Pb and Zn concentrations, pH, organic matter content, and phosphorus levels all showed significant correlations with the AMF species compositions in root and soil samples. Overall, the uncontaminated sites had higher species diversity than sites with heavy metal contamination. The study highlights the effects of different soil chemical parameters on AMF colonization, spore density and community structure in contaminated and uncontaminated sites. The tolerant AMF species isolated and identified from this study have potential for application in phytoremediation of heavy metal contaminated areas.     

Potato absorption and phytoavailability of Cd,Ni, Cu,Zn and Pb in sierozem soils amended with municipal sludge compost

Effects of sludge utilization on the mobility and phytoavailability of heavy metals in soil-plant systems have attracted broad attention in recent years. In this study, we analyzed the effects of municipal sludge compost(MSC) on the solubility and plant uptake of Cd, Ni, Cu, Zn and Pb in a soil-potato system to explore the mobility, potato plant uptake and enrichment of these five heavy metals in sierozem soils amended with MSC through a potato cultivation trial in Lanzhou University of China in 2014. Ridge regression analysis was conducted to investigate the phytoavailability of heavy metals in amended soils. Furthermore, CaCl_2, CH_3 COONH_4, CH_3COOH, diethylene triamine pentacetic acid(DTPA) and ethylene diamine tetraacetic acid(EDTA) were used to extract the labile fraction of heavy metals from the amended soils. The results show that the MSC could not only improve the fertility but also increase the dissolved organic carbon(DOC) content of sierozem soils. The total concentrations and labile fraction proportions of heavy metals increase with increasing MSC percentage in sierozem soils. In amended soils, Cd has the highest solubility and mobility while Ni has the lowest solubility and mobility among the five heavy metals. The MSC increases the concentrations of heavy metals in the root, stem, peel and tuber of the potato plant, with the concentrations being much higher in the stem and root than in the peel and tuber. Among the five heavy metals, the bioconcentration factor value of Cd is the highest, while that of Ni is the lowest. The complexing agent(DTPA and EDTA) extractable fractions of heavy metals are the highest in terms of phytoavailability. Soil properties(including organic matter, p H and DOC) have important impacts on the phytoavailability of heavy metals. Our results suggest that in soil-potato systems, although the MSC may improve soil fertility, it can also increase the risk of soils exposed to heavy metals.     

信阳市主要野生水产动物重金属含量分析及质量安全评价

测定了信阳市主要野生水产动物Cd、Cr、Pb、As和Hg的含量,并根据单因子污染指数评价法对信阳市主要野生水产动物的品质进行质量安全评价。结果表明,8种信阳市主要野生水产动物的所有样品中均检出Pb和Cr,但均未检出Cd和Hg。在鲫鱼、鲤鱼、青虾和克氏原螯虾中检出As,检出率分别为60%、65.5%、55%和50%。单因子污染指数评价法表明,8种信阳市主要野生水产动物均受到不同程度的Pb污染,鲤鱼和鲫鱼受到了轻度的As污染。     

Heavy Metals Residues in Soil,Feed and Beef of the Cattle Industry in Yili area of Xinjiang

In order to understand the situation of heavy metal residues of the beef industry chain in Yili area of Xinjiang.The heavy metals (Pb, As, Hg, Cr and Cd) in soil, feed and beef of the cattle farm were determined using the atomic absorption spectrometry.The results showed that the heavy metal (Pb, As, Hg, Cr and Cd)contents in soil samples were 0.03-0.20, 3.87-8.30, 0.15-0.23, 0.09-0.48 and 0.41-0.86 mg/kg, respectively.The heavy metal (Pb, As, Hg, Cr and Cd) contents in feed samples were 3.01-18.09, 75.35-94.27, 19.65-24.37, 0.06-1.04 and 1.81-8.46 μg/kg, respectively.The heavy metal (Pb, As, Hg, Cr and Cd) contents in beef samples were 0.23-0.54, 1.22-7.12, 0.28-0.53, 0.01-0.27 and 0.02-0.03 μg/kg, respectively.The correlation coefficient of the heavy metal element between soil and feed, feed and beef, soil and beef were 0.96, 0.99 and 0.98, respectively.It was concluded that the heavy metal (Pb, As, Hg, Cr and Cd) contents in soil, feed and beef of the cattle farms in Yili area did not exceed the standard and that in the soil, feed and beef had the high correlations.     

重型轮式拖拉机燃油箱设计要点

重型轮式拖拉机通常采用滚塑燃油箱,能充分利用拖拉机侧方的空间,增大燃油箱容积,满足此种拖拉机农忙时较长时间工作的要求。燃油箱外形必须根据拖拉机整机结构和燃油箱周边零件外形进行设计,外形设计还需要考虑燃油箱自身强度和热膨胀的因素。加油口、通气孔、联通口和转角设计等设计细节也决定着燃油箱的设计质量。