长链酰胺化纳米纤维素增强聚乳酸复合材料

以纳米纤维素(NCC)为原料,先采用四甲基哌啶氮氧化物(TEMPO)氧化制备氧化纳米纤维素(TONC),再与不同链长脂肪胺在催化剂作用下发生反应,得到脂肪胺改性纳米纤维素,当脂肪胺为十二胺(DOA)、十四胺(TEA)、十六胺(HEA)、十八胺(OCA)时,分别制得DOATONC、TEATONC、HEATONC和OCATONC。傅里叶变换红外光谱(FT-IR)、X射线衍射(XRD)和元素分析表明:脂肪链接枝成功,改性后纳米纤维素的晶形没有发生改变,为原有Ⅰ型晶型;接触角和分散性测试表明:随着脂肪链的增长,改性纳米纤维素表面的亲水性明显下降(接触角由65.8°上升至93.9°),而分散率由25.17%先降至11.97%,再升至71.71%。将1%的改性纳米纤维素添加到聚乳酸(PLA)中制得复合膜,机械性能测试结果表明:随着脂肪链的增长,复合膜的机械性能明显提高,其中PLA/OCATONC复合膜的拉伸强度和断裂伸长率分别达到40.2 MPa和6.39%。     

Introduction to the International Symposium on Lipid Science and Health and research progress in lipid science and health

The International Symposium on Lipid Science and Health (ISLSH), which was organized annually by Oil Crops Research Institute of Chinese Academy of Agricultural Sciences (OCRI-CAAS) since 2016, has gained a strong reputation and attracted hundreds of delegates from around the world for discussion of lipid research trends and advances every year, to promote research and academic exchanges in the fields of lipid science and health. The 5th International Symposium on lipid Science and Health was successfully held in Wuhan, China, from October 23rd to 25th, 2020, to celebrate the 60th anniversary of OCRI-CAAS. The two-day symposium gathered well-known experts specialized in lipid science to share the current state of lipid research with emphasis on aspects covering: (1) lipid profiling and characterization, (2) lipid preparation and modification, (3) lipid improvement and regulation, and (4) lipid nutrition and health. The symposium was conducted by a combination of on-site and network meeting. More than 250 distinguished delegates from academia and industry participated in the on-site multidisciplinary meeting, and thousands of scholars attended the virtual event. This paper is as a record of the symposium proceedings and a brief summary of the advances and trends in 4 aspects of lipid science and health.     

汽车变速器齿轮修形仿真分析

汽车变速器的关键部件齿轮因其加工和装配质量的影响,工作时容易引起振动噪声大及承载能力降低等问题,而齿轮修形是解决这些问题的有效方法,且成本较低。针对某款汽车变速器,利用Romax对齿轮进行修形分析。结果表明,修形后减小了齿轮的传动误差和最大接触应力,齿面载荷分布更加合理。有效改善了齿轮的传动性能,增加了齿轮寿命。     

镍－碳化硅复合电镀的研究

报道了瓦特型镍－碳化硅复合电沉积过程，研究了ＳｉＣ微粒的表面活性剂处理，粒子浓度阴极电流密度，搅拌和ｐＨ值等因素对镀层硬度和耐磨性的影响。结果表明，在最佳的工艺条件下，可制备出性能优良的复合镀层（９％～１０％ＳｉＣ含量）其硬度是纯Ｎｉ的４～５倍，耐磨性是纯Ｎｉ的５～６倍。     

高效预应力混凝土框架的试验研究

通过２榀预应力混凝土叠合框架１：３比例的模型试验，了解了叠合梁框架在竖向荷载作用下的受力性能。讨论了叠合梁截面应变分布特点，并分析了梁的配筋率这一主要参数对框架极限承载力和破坏形态的影响。     

改善E1级胶合板用UF胶粘剂预压性能的研究

利用氧化淀粉在树脂合成后期、API在调胶时加入分别对脲醛树脂进行改性，探讨改性UF对胶合板预压强度的影响。采用正交实验法对比改性后胶合板的预压性能和改性后胶合板的甲醛释放量的变化。结果表明：随着API量的加大，胶合板的预压性能得以提高；而氧化淀粉改性后则随着量的加大，一定范围内胶合板的预压性能得以提高，加入量继续加大后反而下降。     

浅谈CFG桩复合地基

CFG桩是一种新的加固地基方法。具有适用范围广、加固地基效果明显、综合利用粉煤灰和工业废渣等优点。经济效益和社会效益好,极有推广价值。     

Comparison of cavity modification and community involvement as strategies for hornbill conservation in Thailand

We monitored breeding success of hornbills in Thailand for four sympatric species at Khao Yai National Park during 1981-2002 and six species at Budo-Sungai Padi National Park during 1994-2002. Within a 60 km² study area at Khao Yai, the well protected area, use of available cavities ranged from 94% in 1984 to 50% in 1993. Competition for nesting cavities was 40% of cavities available indicating the shortage of suitable cavity. We monitored the cavity condition and modified 48 cavities and, between 1996 and 2000, these contributed annually 23-45% of nestings that were successfully fledged (n = 352). Within the 90 km² at Budo Mountain, with heavy human disturbance, use of available cavities for nesting decreased from 81% in 1997 to 30% by 2001 and of successful fledging from 96% in 1997 to 55% in 1999, but both increased once our involvement with local communities had eradicated poaching and reduced disturbance. Competition for nesting cavities here was 26% of cavities available indicating the effect of poaching. Both strategies were successful in the short term but long-term management of cavities in large forest trees is required at Khao Yai and of forest disturbance at Budo.     

LLDPE/PS塑料合金及其与木纤维形成复合材料的研究

研究线性低密度聚乙烯(LLDPE)与聚苯乙烯(PS)共混制备的塑料合金的性能并用不同制备条件的塑料合金与木纤维复合形成塑料合金/木纤维复合材料,研究该种复合材料的外观质量及物理力学性能.结果表明:不同共混比例与共混温度对制备的塑料合金熔体流动性、力学强度有较显著影响.塑料合金/木纤维复合材料的性能与塑料合金共混比例及共混温度有较强的相关性.2种塑料在共混比为50/50,共混温度为200℃时,形成的塑料合金与木纤维具有相对最好的相容性和最好的材料外观质量与力学性能.DMA试验表明:塑料合金/木纤维复合材料的耐热性明显优于相应的塑料合金.     

Ultrastructural Localization of Hydrogen Peroxide in Host Leaves Treated with AK-toxin I Produced by Alternaria alternata Japanese Pear Pathotype

The rapid generation of reactive oxygen species (ROS), called the oxidative burst, is one of the earliest host responses to pathogen infection or elicitor treatments. Therefore, we looked for the induction of ROS generation in Japanese pear leaves by the host-specific toxin, AK-toxin I using a cytochemical method for detecting H₂O₂. A small amount of non-specific generation of H₂O₂ was found in the cell walls in toxin- and water-treated susceptible and resistant leaves. Thus, the generation of H₂O₂ at cell walls appears to be caused by wounding stress during sampling. Specific generation of ROS, however, was found only in the membrane fragments and extended desmotubules characteristic of modified sites of the plasma membrane in the toxin-treated susceptible leaves. In addition, generation of H₂O₂ at plasma membranes was observed with higher frequency in toxin-treated susceptible leaves. This result indicates that the H₂O₂ generation was associated with damaged sites in the plasmalemma after toxin treatment and perhaps with the formation of membrane fragments from altered portions of the invaginated plasma membrane. Received 21 September 2001/ Accepted in revised form 25 October 2001