不同阶段猪用颗粒饲料物理性能的对比分析

对某饲料厂不同阶段猪用4种颗粒饲料的物理性能包括直径、长度、硬度、容重、含粉率和耐久性指数（Pellet Durability Index, PDI）等进行测定,对结果进行归类总结并采用统计学的方法参照有关标准进行分析。结果表明,4种颗粒饲料直径在2.87~3.94 mm之间,母猪料直径最大,小猪料最小,两两之间差异显著（P<0.05）,而且随着猪只年龄的增加,颗粒饲料的直径呈递增趋势。颗粒长度在8.62~11.94 mm之间,以大猪料最长,小猪料最短,长径比偏高。颗粒硬度在3.86~6.47 kg之间,以大猪料最大,小猪料最小,中小猪料显著低于大猪料和母猪料（P<0.05）,只有小猪料符合有关要求。颗粒容重在576.7~614.6 g/L之间,母猪料最大,小猪料最小,两两之间差异显著（P<0.05）,与直径呈相同的增减趋势。含粉率以小猪料最大,且只有小猪料与大猪料之间差异显著（P<0.05）。颗粒PDI以大猪料最大,小猪料最小,各阶段猪料的含粉率和PDI均符合有关要求。建议饲料厂家注重颗粒饲料物理性能指标的控制,调整饲料配方和工艺参数,不断改进颗粒饲料的质量。     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

Establishing an eyeball-weight relationship for Litopenaeus vannamei using machine vision technology

This study aimed to establish a shrimp eyeball-weight relationship model for Litopenaeus vannamei using machine vision technology. A total of 295 shrimp were sampled from a recirculating aquaculture system (RAS). The long-axis length (d), body length (L), and body weight (W) of each individual was measured. The long axis length of the shrimp eyeball was identified and measured using machine vision technology. Continuous fitting and piecewise fitting models were used to construct the eyeball-weight relationship model for L. vannamei. The continuous fitting relationship model was described as: W = 38.865d^2.7914, while the piecewise model was described as: d < 2 mm, W = 0.0326d^3.7363, R² = 0.9288; 2 mm ≤ d < 3.9 mm, W = 0.0401d^3.104, R² = 0.9629; 3.9 mm ≤ d < 5.8 mm, W = 0.0421d^3.0311, R² = 0.9216; 5.8 mm < d, W = 0.103d^2.6226, R² = 0.9457. The root mean square error (RMSE) of the piecewise fitting model (0.0244, 0.1575, 0.5034, 0.7072) was smaller than the continuous fitting model (0.8229). The correlation coefficient (R²) of the piecewise model (0.9288, 0.9629, 0.9216, and 0.9457) was similar to that of the continuous fitting model (R² = 0.9621). The results indicated that the piecewise fitting model is suitable for calculating the biomass of L. vannamei in RAS and provides a novel way of estimating the biomass of L. vannamei cultured in RAS. The piecewise fitting model can also provide the foundation of evaluating the production of shrimp using underwater image recognition in intelligent aquaculture systems.     

Propagation techniques on root turion sprout browse ofPopulus davidiana Dode

The root segments selected from dominant trees ofPopulus davidiana Dode were taken as reproductive material and were buried in different depths to carry out the reproduction of root turion sprout. The affecting factors of gemination rate, survival rate, and height growth for cutting wood of root sprout were comparatively analyzed. The results showed that the best suitable substrate for burying root is pearlite, with a germination rate of 15.16%. 3–4-cm root segments has the highest rate of germination (12.4%). The mixture of sand and soil (2∶1) is the best cutting substrate, with a survival rate of 81.3%, while as to height growth of cutting wood, the mixture of turfy and soil (1∶1) is the best. The cutting woods selected from different positions of stem show difference in height growth. The cutting wood from top stem is higher obviously than those from middle or low stem. Biography: XING Ya-juan (1969-), female, assistant researcher in Forest Research Institute of Heilongjiang Province, Harbin 150040, P. R. China. Responsible editor: Song Funan     

水分胁迫对荔枝幼树根系与梢生长的影响

以盆栽沙培1年生荔枝空中压条苗为试材,研究了水分胁迫对荔枝幼树根系和梢生长的影响以及二者的相互关系。3个处理为:沙体积含水量为7.5%(严重缺水),15.0%(一般缺水),22.5%(充分供水)。结果表明:水分胁迫严重抑制荔枝幼树地上部分和各级侧根的生长,使地上部枝梢生长严重受阻,叶片数量、平均叶面积、叶片厚度均显著变小;根总干重、侧根长度、根表面积显著减少。水分胁迫下促进须根的生长,须根的长度、根表面积比水分充足时显著增加。水分胁迫时叶片淀粉含量下降,而根系积累更多的淀粉。比较不同处理的根梢比发现,干旱对根系生长的抑制作用比枝梢更显著。     

应用极大似然法分析小麦穗长的遗传

采用质量—数量性状遗传的极大似然分析方法,对长穗小麦品系93(220)的主茎穗长进行了质量—数量遗传模型测验和主、微基因效应与变异估计。结果表明:长穗小麦新品系93(220)的主茎穗长为一典型的质量—数量性状,由一个主基因和若干微基因共同控制;一对隐性主基因控制穗长,附合加性——显性遗传模型,F1代表现为部分显性,隐性主基因增加主茎穗长的效应平均为1.47,微基因遗传效应为2.83cm,隐性主基因个体主茎穗长表现为长穗。     

紫花苜蓿受冻害后促进根颈枝条再生方法的研究

对蔚县苜蓿根颈冻害后切除冻伤部分处理的比较研究结果表明,处理区的根颈苗数、地上高度、地上生物量、分蘖丛数是对照区的1.6～2倍;处理区苜蓿的各个数量指标的b值大于对照处理苜蓿b值,说明除冻害根颈后苜蓿的生长比不除冻害根颈部分的苜蓿生长更为合理。通过除去苜蓿冻害部位,防止根系继续腐烂,保护了未冻害部分,增加了苜蓿发芽的有效部位。同时,使根系与地面的距离变短或露出地面,增加光照强度,提高地温,促使未冻害苜蓿根系发芽,返青提前增加产量。     

RT-PCR及RFLP分析技术对鸡传染性支气管炎病毒的诊断和S1基因分型的研究

本研究使用分别扩增整个S1糖蛋白基因 (引物A)和S1糖蛋白基因N_端高变区Ⅰ (引物B)的 2对引物对 3个IBV标准株M41、Connecticut、Arkansas及 5个地方分离株 (C60 ,D41A ,D41B ,A112 1,A1171)进行RT_PCR扩增。用引物A时 ,有 5个IBV毒株扩增到目的片段 (172 0bp) ;用引物B时 ,所有 8个IBV毒株均得到与预计大小相符的目的产物 (2 2 8bp)。对 172 0bp的PCR产物用限制性内切酶HaeⅢ进行酶切 ,结果得出 3个不同的RFLP图谱 ,其中M41、Connecticut、D41B具有相同的HaeⅢ酶切图谱。Arkansas和D41A则分别具有互不相同的图谱 ;对 2 2 8bp的PCR产物进行DdeⅠ、RsaⅠ限制性内切酶消化 ,根据它们的RFLP图谱 ,8个IBV毒株可分为 5个基因型。综合 2对引物的PCR产物的RFLP分析结果 ,8个IBV毒株可分为 7个基因型 ,分型的结果与传统的血清学方法吻合。本研究建立的方法和技术具有快速、简单、特异、灵敏等优点 ,为现场流行毒株的定型(基因型 /血清型 )及其S1基因变异的跟踪研究以及更有效防制传染性支气管炎奠定了基础。     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

苎麻属野生种的光反应类型研究

对苎麻属11个野生种资源进行了10h、13h、16h光照处理，在不同光长条件下，表现出短光照生育期缩短、长光照生育期延长；短光照生育期延长、长光照生育期缩短；长、短光照生育期都延长；长、短光照生育期都缩短四个类型，并且不同光照时间对不同的生殖生长期有不同的影响，生长发育的积温差异较大。