Fertilization by refrigerator stored sperm of the Indian major carp, Labeo calbasu (Hamilton, 1822)

This study reports on the spermatological properties, and on the development of a protocol for refrigerator storage (4°C) of Labeo calbasu (Hamilton, 1822) sperm for artificial breeding. Volume, motility, concentration and pH of the freshly collected sperm were 2.21 ± 0.53 (μL g^?1 of fish weight) (mean ± SD), 95 ± 1 (%), 1.93 ± 0.44 × 10⁹ (cells mL^?1) and 7.56 ± 0.17 respectively. Sperm activation was evaluated at different osmolalities of NaCl solution, and motility ceased completely when osmolality of the extender was ≥287 mOsmol kg^?1. Sperm retained motility for 24, 72 and 108 h, after refrigerator storage when sperm were undiluted, suspended in Alsever's solution and suspended in Alsever's solution containing 5% methanol respectively. Fertilization rate of fresh eggs with sperm stored at 4°C in Alsever's solution and Alsever's solution containing 5% methanol was 77% and 60% with a hatching rate of 60% and 43% respectively. The fertilization and hatching success of the stored sperm suggests potential to use refrigeration for transporting genetic material to hatcheries for artificial breeding of L. calbasu in Bangladesh.     

Histological alterations in gills of shrimp Litopenaeus vannamei in low‐salinity waters under different stocking densities: Potential relationship with nitrogen compounds

Two experimental modules with different stocking densities (M1 = 70 and M2 = 120 shrimp /m²) were examined weekly over a culture cycle in tanks with low‐salinity water (1.9 g/L) and zero water exchange. Results showed survival rates of 87.7 and 11.9% in M1 and M2, respectively. Water temperature, pH, dissolved oxygen, electrical conductivity and chlorophyll a were not significantly (p > .05) different between modules. In contrast, the concentrations of nitrogen compounds were significantly (p < .05) different between modules, except nitrite‐N (M2 were 2.31 ± 1.38 mg/L N‐TAN, 0.18 ± 0.49 mg/L N‐NO₂^? and 6.83 ± 6.52 mg/L N‐NO₃^?; in M1: 0.97 ± 0.73 mg/L N‐TAN, 0.05 ± 0.21 mg/L N‐NO₂^? and 0.63 ± 0.70 mg/L N‐NO₃^?). When waters of both modules reached higher levels of ammonia and nitrite, histological alterations were observed in gills. The histological alterations index (HAI) was higher in M2 (5‐112) than in M1 (2‐22).     

Evaluation of selected metal nanoparticles on hatching and survival of larvae and fry of Indian major carp,rohu (Labeo rohita)

Different laboratory synthesized metal nanoparticles viz. Copper oxide (CuO), Zinc oxide (ZnO) and silver doped titanium dioxide (Ag‐TiO₂) were studied for their effect on hatching and survival of larvae and fry of Indian major carp, rohu, Labeo rohita both in direct application in tank water & coated onto tanks. Among these nanoparticles, CuO and ZnO nanoparticles exhibited highest percentage of hatching in both direct addition (78.0 ± 3.1% and 78.05 ± 4.2%, respectively) and coating onto tanks (58.6 ± 2.1% and 61.2 ± 2.7%, respectively) at 1 mg mL^?1 while least percentage of hatching was recorded in Ag‐TiO₂ nanoparticles irrespective of its concentration & mode of supplementation. Highest survival of L. rohita fry (50.13 ± 2.2%) was observed after 15 days post hatching in CuO coated tanks followed by ZnO coated tanks (38.6 ± 2.8%) while least was recorded in Ag‐TiO₂ coated tanks (22.53 ± 3.0%). However in control tanks coated with Poly‐Urethane base with hardener and uncoated control tanks, the survival was 42.4 ± 1.2% and 41.36 ± 1.8% respectively. Further, significantly lower microbial load of water was recorded in CuO nanoparticles coated tanks (1.5 × 10¹⁰ CFU L^?1) as compared to uncoated control tanks (1.1 × 10¹⁶ CFU L^?1) without affecting water quality parameters. On the other hand, in Ag‐TiO₂ coated tanks, significantly lower microbial load (1.0 × 10⁶ CFU L^?1) as compared to uncoated control tanks at 15 days post hatching was recorded. However, Ag‐TiO₂ was toxic to L. rohita larvae & fry both in direct application and coating onto tanks. Considering the beneficial effects of CuO nanoparticle application, it has the scope of being used in a more eco‐friendly way in hatchery operations.     

A comparison between water exchange and settling tank as a method for suspended solids management in intensive biofloc technology systems: effects on shrimp (Litopenaeus vannamei) performance,water quality and water use

Biofloc systems rely on microbial processes in the water column to recycle animal waste products, reducing the need for water exchange. These increases biofloc concentration in the water and some form of removal is needed. An experiment was carried out to evaluate two management practices to control biofloc in Litopenaeus vannamei culture. Six tanks (48 m³) were divided into two treatments: water exchange and solid settler. Shrimp were stocked at 164 shrimp m^?2 and with 0.67 g of weight. After 61 days, shrimp under solid settler treatment demonstrated mean weight of 12.7 ± 0.5 g with survival of 73.8 ± 1.4%, and those under water exchange had a final weight of 10.1 ± 0.2 g and survival rate of 57.8 ± 11.1%. Total suspended solids did not differ between the treatments: 326.8 ± 24.9 mg L^?1 for water exchange and 310.9 ± 25.3 mg L^?1 for solid settlers. Settleable solids and productivity/respiration ratio was higher (P < 0.05) in water exchange treatment, indicating differences in physical and biological characteristics of bioflocs. Solids removal method influenced the water use, in which 1150 ± 249 L of water was necessary to produce one kilogram of shrimp using water exchange strategy, and 631 ± 25 L kg^?1 with the use of settlers. Our results indicate that continuous operation of settlers can reduce variability in solids characteristics and water quality variables such as ammonia. Both strategies are efficient in controlling biofloc concentrations of the water; however, settlers can reduce water use and improve shrimp production.     

Essential oils to control ichthyophthiriasis in pacu,Piaractus mesopotamicus (Holmberg): special emphasis on treatment with Melaleuca alternifolia

In vitro effect of the Melaleuca alternifolia, Lavandula angustifolia and Mentha piperita essential oils (EOs) against Ichthyophthirius multifiliis and in vivo effect of M. alternifolia for treating ichthyophthiriasis in one of the most important South American fish, Piaractus mesopotamicus (Holmberg), were evaluated. The in vitro test consisted of three EOs, each at concentrations of 57 μL L^?1, 114 μL L ^?1, 227 μL L^?1 and 455 μL L ^?1, which were assessed once an hour for 4 h in microtitre plates (96 wells). The in vitro results demonstrated that all tested EOs showed a cytotoxic effect against I. multifiliis compared to control groups (P < 0.05). The in vivo treatment for white spot disease was performed in a bath for 2 h day^?1 for 5 days using the M. alternifolia EO (50 μL L ^?1). In this study, 53.33% of the fish severely infected by I. multifiliis survived after the treatment with M. alternifolia (50 μL L ^?1) and the parasitological analysis has shown an efficacy of nearly 100% in the skin and gills, while all the fish in the control group died. Furthermore, the potential positive effect of M. alternifolia EO against two emergent opportunistic bacteria in South America Edwardsiella tarda and Citrobacter freundii was discussed.     

Evaluating the use of garlic (Allium sativum) for the remedy of Cryptocaryon irritans in guppies (Poecilia reticulata)

Garlic (Allium sativum) has been shown to possess antimicrobial properties against a range of disease‐causing agents, including fish parasites. Our study aimed to investigate the potential use of garlic as a treatment against Cryptocaryon irritans infection, using guppies (Poecilia reticulata) as the fish model. Garlic was freeze‐dried, powdered, and used as it is or as an aqueous extract. The content of allicin, its main active ingredient, was 1.25 mg/g in garlic powder and 0.82 mg/ml in the aqueous extract, as determined by HPLC analysis. Aqueous garlic extract fully immobilized C. irritans theronts and protomonts within 20 and 40 min, respectively, following exposure to 5 µl/ml. Treatment trials were performed, in which infected fish were fed with garlic powder‐supplemented feeds (5%, 10%, or 20% supplementation), bathed in garlic aqueous extract (250 or 500 µl/L) and subjected to a combined treatment which included both feeding and bathing. Results revealed that the tested treatments failed to cure the infection, though reduction in infection intensity on the caudal fin, but not on the gills, was evident following dietary supplementation with 20% of powdered garlic in one of the trials.     

In vitro and in vivo antifungal activity of Satureja cuneifolia ten essential oil on Saprolegnia parasitica strains isolated from rainbow trout (Oncorhynchus mykiss,Walbaum) eggs

In the present study, the chemical composition and the antifungal properties against Saprolegnia parasitica (in vitro and in vivo) of the essential oils of thyme (Satureja cuneifolia) from Mediterranean region of Turkey were evaluated for the first time. The composition of oils was analysed using gas chromatography/mass spectrometry (GC/MS). The major constituents of oil of S. cuneifolia were cavracrol (46,84%) and cymene (16.90%). Antifungal effects of S. cuneifolia essential oil against S. parasitica strains (A1 and E1) were detected by disc diffusion and tube dilution assays. The antifungal effect of S. cuneifolia was determined to be stronger against S. parasitica E1 isolate (MIC 50 μL mL^?1, MLC 250 μL mL^?1) compared with S. parasitica A1 isolate (MIC 50 μL mL^?1, MLC 500 μL mL^?1). Following in vitro assays, effective doses of S. cuneifolia for disease control in rainbow trout eggs experimentally infected with S. parasitica were investigated. For this aim, infected eggs were treated with the essential oil (0, 5, 10, 20 and 50 ppm) during incubation period (21 days) after fertilization. Formalin (5 mL L^?1) was used as positive control. Hatching rate of eggs at the end of incubation period were calculated. The highest hatching rates were recorded in S. parasitica E1 strain at 5 and 10 ppm concentrations of S. cuneifolia and in S. parasitica A1 strain at 10 and 20 ppm (P < 0.05).     

Optimum feeding rates in juvenile olive flounder,Paralichthys olivaceus,at the optimum rearing temperature

Two feeding trials were carried out to determine the optimum feeding rates in juvenile olive flounder, Paralichthys olivaceus, at the optimum rearing temperature. Fish averaging 5.0 ± 0.11 g (mean ± SD) in experiment 1 and 20.2 ± 0.54 g (mean ± SD) in experiment 2 were fed a commercial diet at the feeding rates of 0%, 3.0%, 4.0%, 4.25%, 4.5% and 4.75% body weight (BW) day^?1 and satiation (5.52% BW day^?1) in experiment 1 and 0%, 1.0%, 2.0%, 3.0% and 3.5% BW day^?1 and satiation (4.12% BW day^?1) in experiment 2 at 20 ± 1 °C. Both feeding trials lasted for 2 weeks. Results from experiment 1 indicated that weight gain (WG) and specific growth rate (SGR) of fish fed to satiation were significantly higher than those of fish fed at other feeding rates while feed efficiency (FE) and protein efficiency ratio (PER) of fish fed at 4.25% BW day^?1 were significantly higher than those of fish fed to satiation and fish fed at 3.0% BW day^?1 (P < 0.05). In experiment 2 WG, SGR and PER leveled out after the feeding rate of 3.5% BW day^?1 whereas FE reached a plateau at 3.0% BW day^?1. anova of FE indicated that the optimum feeding rates in 5.0 and 20 g juvenile olive flounder could be 4.25% and 3.0% BW day^?1, respectively. Broken line analysis of WG suggested the optimum feeding rates of 5.17% and 3.47% BW day^?1 in 5.0 and 20 g fish, respectively. Therefore, these results indicated that the optimum feeding rates could be >4.25 but <5.17% BW day^?1 for 5.0 g, and it could be >3.0 but <3.47% BW day^?1 for 20 g size of juvenile olive flounder at the optimum rearing temperature.     

Influence of feeding regime and temperature on development and settlement of oyster Ostrea edulis (Linnaeus, 1758) larvae

Under controlled conditions of food density and temperature, larval performances (ingestion, growth, survival and settlement success) of the flat oyster, Ostrea edulis, were investigated using a flow‐through rearing system. In the first experiment, oyster larvae were reared at five different phytoplankton densities (70, 500, 1500, 2500 and 3500 μm³ μL^?1: ≈1, 8, 25, 42 and 58 cells μL^?1 equivalent TCg), and in the second, larvae were grown at four different temperatures (15, 20, 25 and 30°C). Overall, larvae survived a wide range of food density and temperature, with high survival recorded at the end of the experiments. Microalgae concentration and temperature both impacted significantly larval development and settlement success. A mixed diet of Chaetoceros neogracile and Tisochrysis lutea (1:1 cell volume) maintained throughout the whole larval life at a concentration of 1500 μm³ μL^?1 allowed the best larval development of O. edulis at 25°C with high survival (98%), good growth (16 μm day^?1) and high settlement success (68%). In addition, optimum larval development (survival ≥97%; growth ≥17 μm day^?1) and settlement (≥78%) were achieved at 25 and 30°C, at microalgae concentrations of 1500 μm³ μL^?1. In contrast, temperature of 20°C led to lower development (≤10 μm day^?1) and weaker settlement (≤27%), whereas at 15°C, no settlement occurred. The design experiments allowed the estimation of the maximum surface‐area‐specific ingestion rate  = 120 ± 4 μm³ day^?1 μm^?2, the half saturation coefficient {X_K} = 537 ± 142 μm³ μL^?1 and the Arrhenius temperature T_A = 8355 K. This contribution put a tangible basis for a future O. edulis Dynamic Energy Budget (DEB) larval growth model.     

Optimization of growth requirements of marine diatom Chaetoceros muelleri using Response Surface Methodology

The marine centric diatom Chaetoceros muelleri has been widely used as live feed in fish and shellfish aquaculture due to its excellent nutritional properties. The growth of microalgae is affected by various nutritional and environmental parameters, and species specific optimization of these parameters is essential for the development of cost‐effective biomass production process. In this study, the growth of C. muelleri, was optimized using response surface methodology (RSM). The variables nitrate, phosphate, silicate, temperature, pH, salinity and agitation speed were initially screened for biomass production in C. muelleri using Plackett–Burman experimental design, and it was found that nitrate, phosphate, silicate, temperature and pH significantly influenced the biomass production. These variables were further optimized by central composite design of RSM for biomass production and nutrient composition, and the medium was re‐constituted accordingly to have 180 mg L^?1 nitrate, 7.5 mg L^?1 phosphate, 30 mg L^?1 silicate, with optimum growth conditions of temperature at 31°C and pH 6.46. At the end of 10 days culture period under the above conditions, biomass, protein, lipid and carbohydrate significantly increased from 0.360 ± 0.01 mg L^?1, 9.41 ± 0.02%, 18.11 ± 0.01%, 0.6 ± 0.02% to 1.16 ± 0.01 mg L^?1, 11.02 ± 0.01%, 19.58 ± 0.01% and 0.77 ± 0.01% respectively. The biomass production of C. muelleri could be increased 3.2‐fold with an improved nutrient profile by modifying the growth factors, the study thus offering an optimized process for biomass production of C. muelleri.