Vegetative propagation of Colutea arborescens L., a multipurpose leguminous shrub of semiarid climates

The vegetative propagation of the multipurpose leguminous shrub Colutea arborescens from leafless hardwood cuttings was examined. Specific attention was paid to the factors: 1) cutting origin (apical, medial or basal); 2) indole-3-butyric acid (IBA) treatment (0, 50 or 200 ppm); and 3) relative humidity of the propagation environment (high or low humidity). After 120 days, 67.6% of the C. arborescens cuttings had rooted. The rooting ability of the cuttings was significantly influenced by the cutting origin and hormonal treatment. No effects on rooting percentage were shown by the relative humidity of the propagation environment. The best rooting response (95%) was shown by basal cuttings treated with 200 ppm IBA. Cutting origin, IBA treatment and relative humidity were significantly related to the root number, longest root length and the fresh/dry biomass of roots and leaves. Under conditions of high humidity, basal cuttings treated with 200 ppm IBA gave rise to the most highly developed plants. The positive relationship between sprouting and rooting suggests that successful propagation is related to the shoot formation potential of the cutting's food reserves. These findings were used to propose an efficient method for the vegetative propagation of C. arborescens plants. This revised version was published online in June 2006 with corrections to the Cover Date.     

Effect of branch position and auxin treatment on clonal propagation of <Emphasis Type="Italic">Tectona grandis</Emphasis> Linn. f.

The main objective of our clonal propagation program is the production of high quality timber and faster tree growth. Teak (Tectona grandis Linn. f.) is an important plantation species in the tropics but the demand of teak timber is increasing globally. Teak planting stock is still produced from seeds of unselected elite genotypes which may lead to poor stand establishment. The number of seeds per fruit and their germination ability are also variable and limited by several factors. Therefore an alternative method i.e., clonal propagation is required for mass multiplication of elite trees. It is an established fact that the clonal propagation or adventitious root formation in cuttings is markedly affected by several external and internal factors. Considering these, an experiment was conducted on leafy soft wood shoot cuttings of 3-year-old hedged teak stock plants grown in a hedge garden to study the effects of branch position and auxin treatment on adventitious root formation. A factorial completely randomized design was used for experimentation. Coppice shoots were collected from basal, middle and upper positions of the hedge garden; and mono-nodal leafy cuttings were prepared. These cuttings were treated with different concentrations of IBA and NAA; and were cultured in a mist chamber for rooting where the relative humidity was maintained at 85 ± 2% with maximum and minimum day-night temperature at 32 ± 1°C and 26 ± 1°C respectively. After 45 days the cuttings were removed from the rooting medium and observations were made. It was observed that the rooting parameters viz., percent rooting and percent sprouting, mean number of leaves, mean number of shoots and length, and mean number of roots and length per cutting were significantly influenced by the branch position and auxin treatment. Treatment with 4000 ppm IBA increased percent rooting and percent sprouting whereas NAA suppressed it. Treatment with 4000 ppm IBA also increased the mean number of leaves and shoots, and the length, and the mean number of roots per cutting. The highest mean number of roots and length were observed in cuttings taken from the branch emerging at the upper position followed by branches of middle and lower position. Cuttings of branches at a middle position showed the highest values of percent rooting, percent sprouting, mean number of leaves and shoots and mean shoot length per cutting. Furthermore, the interactive effect of branch position and auxin treatment on rooting and sprouting response was also found to be significant. Overall, the findings of this investigation suggest that middle branch position in hedge plants and 4000 ppm IBA can be made to induce maximum rooting and to produce high quality planting stock material for clonal forestry program of teak.     

Vegetative propagation of the threatened African wild olive [Olea europaea L. subsp. cuspidata (Wall. ex DC.) Ciffieri]

A rapid vegetative propagation method is described for Olea europaea L. subsp. cuspidata [Wall. ex DC.) Ciffieri (syn. Olea africana Mill.)]. Leafy branch cuttings were harvested from 6 to 7-month-old stecklings (= plants derived from rooted cuttings). Cuttings 2–3 mm in basal diameter were trimmed to 70–100 mm in length, with leaf areas reduced to 15–33 cm². Indolebutyric acid (IBA) was applied at 0, 10, 20, 25, 30, 35 and 40 µg/cutting to each of the 70–80 replicate cuttings randomly allocated to each of the 7 treatments. Callusing and rooting occurred 3–5 and 5–7 weeks after treatment, respectively. The rooting success of cuttings treated with 20 or 40 µg IBA/cutting was 75 and 90%, respectively. Differences in rooting success, speed of rooting and root numbers between the control and the IBA treatments were significant (p < 0.01). Compared to seedlings of similar shoot height, rooted cuttings grew significantly (p < 0.01) faster and produced more biomass. It is concluded from this study that the rooting of leafy branch cuttings derived from young stockplants of wild olive is rapid, and that vegetative propagation is an effective means of regenerating this valuable, yet threatened, tree species.     

Cutting propagation of <Emphasis Type="Italic">Santalum austrocaledonicum</Emphasis>: the effect of genotype,cutting source,cutting size,propagation medium,IBA and irradiance

Developing methods for routine clonal propagation of sandalwood (Santalum austrocaledonicum) is important for its domestication and development as a commercial agroforestry species. The amenability of this species to propagation by leafy stem cuttings in low-cost non-mist propagators was assessed in four separate experiments. These experiments evaluated the effects of (1) genotype (15 genotypes from two island provenances), (2) cutting position on the stock plant (apical, medial and basal), (3) cutting size (1-node/400 mm² and 2-node/800 mm² leaf area), (4) three propagation media [scoria (5 mm, air-filled porosity (AFP)—29%), vermiculite and perlite (1:1 v/v, AFP—46%) and vermiculite, perlite and peat (2:2:1 v/v/v, AFP—42%)], (5) indole-3-butyric (IBA) (3000, 4000 and 8000 ppm) and (6) irradiance in the propagator [daily light integral (DLI) 5.3, 3.9, 2.6, 2.2 mol m^?2 day^?1]. IBA, propagation media and cutting size had no significant effect on rooting percentage, root number or root growth. Evidence of provenance-based variation in rooting capacity was recorded with greater rooting success for genotypes from the island of Erromango compared with Tanna. Variation in adventitious root induction was also recorded between individual genotypes from Erromango across all four experiments. Cuttings collected from the apical and medial parts of the shoot on the stock plant had higher rooting percentage than those collected from the base. Differences in rooting capacity between apical and medial shoots were variable between experiments and may be attributed to different levels of hardening. The use of artificial shade (~?70%) to achieve a mean DLI of between 2.6 and 3.9 mol m^?2 day^?1 increased rooting percentage compared to both lower (2.2 mol m^?2 day^?1 or?~?90% shade) and higher (5.3 mol m^?2 day^?1 or?~?50% shade) irradiance treatments. Leaf retention of cuttings in the propagator was positively associated with the percentage of cuttings with adventitious roots, with highest percentage in cuttings with full leaf retention, regardless of original cutting size. This study demonstrated S. austrocaledonicum seedlings can be successfully propagated by cuttings provided the propagation conditions are optimized for each genotype.     

Vegetative propagation of African Blackwood (<Emphasis Type="Italic">Dalbergia melanoxylon</Emphasis> Guill. &; Perr.): effects of age of donor plant,IBA treatment and cutting position on rooting ability of stem cuttings

A study to determine the best vegetative propagation protocol was carried out for Dalbergia melanoxylon. Natural regeneration of D. melanoxylon is limited due to poor seed viability and germination. The effects of age of donor plant, indole-3-butyric acid (IBA) treatment and cutting position on rooting of stem cuttings were investigated. The effect of age of donor plant was significant (P < 0.001) only for percent rooting, position effect was significant for all studied parameters, and IBA treatment at 300 ppm was insignificant only for percent callusing. Interactive effects of cutting position × age of donor and cutting position × IBA treatment were significant for percent rooting and root number per cuttings while interactive effect of age × IBA was significant only for percent rooting. Observed difference in rooting performance could be due to uneven distribution of root promoting and inhibiting substances with respect to age of donor plant and IBA which intensified root formation. Cuttings from juvenile donor plant performed better in all rooting parameters than mature donor plant. The highest percentages in rooting were (71.11%) and (24.42%) for cuttings from juvenile and mature donor plants, respectively. IBA treated cuttings produced higher percentage rooting, number of roots and root length than untreated cuttings which revealed a strong IBA influence on rooting ability of stem cuttings in D. melanoxylon. It was concluded that stem cuttings should be taken from juvenile donor plants and basal cutting position should be used to produce high quality planting stock material for the afforestation and conservation programme of D. melanoxylon.     

Vegetative propagation of African Mahogany: effects of auxin, node position, leaf area and cutting length

Applied auxin, node position, leaf area and cutting length were examined to investigate the requirements for rooting stem cuttings of Khaya ivorensis. All these variables were shown to be important factors affecting rooting, confirming the hypothesis that successful rooting can be achieved if these primary variables are optimised.The best concentration of the auxin IBA was found to be 200 g per cutting, which hastened rooting, increased the percentage of cuttings rooted and increased the number of roots per cutting. One clone (8013) was unresponsive to auxins in terms of the percentage of cuttings rooted, but was the most responsive in terms of the numbers of roots per cutting. A greater percentage of cuttings from basal nodes were rooted than from apical nodes. Cuttings cut squarely at the base produced a radially-arranged root system, whereas an oblique cut resulted in a one-sided root system.Trimming the leaf area of cuttings to 10 cm² gave greater rooting percentages than trimming to 100 cm². In general, long cuttings (39 mm) rooted better than short cuttings (19 mm), however, there was an interaction between leaf area and cutting length, in which cuttings with short stems and large leaves had the lowest rooting percentage.     

穗条生根剂育苗基质和季节对西南桦扦插生根的影响

西南桦(Betula alnoides Buch.-Ham.ex D.Don)是我国西南省(区)造林规模最大的乡土珍贵用材树种.西南桦具有材性优良、容易加工、色泽淡红、不易变形等木材特性,是高级家具、室内装修、木地板的优质材料,经济价值甚高.由于目前育苗用种多采自天然次生林,随着西南桦天然资源的日益贫乏,加剧了造林规模不断扩大与供种量逐渐减少的矛盾;而且,实生苗造林的林木个体间遗传变异较大,林分木材单产较低.随着良种选育工作的深入,西南桦人工林向"有性选育,无性利用"路径发展.     

Crop productivity under differently lopped canopies of multipurpose trees in Central Himalaya, India

Ficus species are multipurpose trees well known by rural populations in Sahelian and Sudanian zones of Africa. Their uses are well documented but their amenability for vegetative propagation has not been extensively studied. This paper compares the rooting ability of stem and aerial root cuttings from thirteen Ficus species found in West Africa. It highlights the differences between species belonging to the sub-genera Sycomorus and Urostigma. The former show no capacity to propagate from cuttings whereas the latter, with epiphytic development, can be propagated by cuttings, although this capacity varies among species. Thus, F. thonningii, F. leprieurii and F. ovata are easily propagated, while F. platyphylla and F. elasticoides are propagated with difficulty. The rooting capacity also varies depending on the cutting material used. It decreases in the following order: long leafless hardwood cuttings (pole) > nodal cuttings > apical cuttings. Rooting potential increases when the cuttings are harvested towards the end of the dry season(March to May). Aerial root can be used for cuttings in all species of the sub-genus Urostigma. The capacity of root cuttings to regenerate is greatest when cuttings are collected at the beginning of the dry season (November). In this case, wound-induced adventitious roots arise at the basal end of the cutting while de novo buds are developed from the cambium at the distal end. The subsequent morphological development is identical to that of a stem cutting. These results clarify and allow the optimal use of the knowledge and methods developed by the indigenous people of the Sahel and could assist and promote fig tree (Ficus sp.) domestication in the dry tropics.This revised version was published online in November 2005 with corrections to the Cover Date.     

Clonal propagation of guava （Psidium guajava Linn.） by stem cutting from mature stockplants

Introduction Guava (Psidium guajava Linn.), belonging to the Family Myrtaceae, is originated in the tropical South America (Hayes 1970; Pathak and Ojha 1993) and grows wild in Bangladesh, India, Thailand, Brazil, Florida, West Indies, California and also …     

Adventitious rhizogenesis in Bambusa nutans and Bambusa tulda: Influence of seasonal variation, IBA and cutting type

The influence of seasonal variation, indole-3-butyric acid (IBA) and type of cuttings was examined on induction and growth of adventitious roots in Bambusa nutans Wall. and Bambusa tulda Roxb. Singlenode culm and culm-branch cuttings from the mature culms were provided with immersion treatment for 24 h of either water (control) or 2 mM IBA in four different seasons, i.e., spring (mid February), summer (mid May), rainy (mid July), and winter (mid November) and maintained for two months in the mist chamber at the relative humidity of (70±5)% and the temperature of (30±2)°C. In B. nutans, adventitious rooting occurred in both types of cuttings in all the seasons with the best rooting in the summer season i.e., May (88% in culm cuttings) and the least in winter. On the contrary, adventitious rooting was recorded only in culm cuttings in spring and summer season in B. tulda. IBA treatment significantly enhanced rooting, root number and root length; registering 14 to 17 times improvement over control in the best rooting season. Three factor-interactions (season × cutting type × IBA treatment) were significant for rooting in B. nutans and all characteristics, except sprouting in B. tulda. Thus, single-node culm and culm-branch cuttings in B. nutans and culm cuttings in B. tulda treated with 2 mM IBA during spring (February) to summer (May) season are recommended for their clonal multiplication.     

金叶银杏硬枝扦插繁殖生根过程及其生根机制研究

【目的】研究不同生长调节剂处理对金叶银杏硬枝扦插生根率和成活率的影响,探讨金叶银杏的生根机制,为金叶银杏苗木扦插快繁技术体系的建立提供技术支持和理论指导。【方法】通过NAA和IBA处理金叶银杏硬枝插穗,检测它们对插穗的生根状态、生根指标及IBA对扦插过程中插穗皮部可溶性糖、抗氧化酶、激素含量的影响,探究金叶银杏硬枝扦插繁殖技术和生根机理。【结果】1)金叶银杏插穗愈伤组织诱导期和形成期、不定根发生期和形成期分别在插后的20~26、26~42、42~53、53~79 d。2)800 mg·L^-1 IBA和400 mg·L^-1 NAA+400 mg·L^-1IBA(混合)处理的插穗愈伤组织和不定根出现期及生根率与根数都较其他相应处理的效果好,其中生根率分别达64.4%和51.1%;不定根数分别达8.6条和9.3条。3)插穗生根过程中(500 mg·L^-1 IBA处理)基部韧皮部的SOD、PPO活性在插后40、60 d达到高峰,均比对照提前20 d达到峰值;插穗的POD活性出现上升-下降-升高的趋势,插穗可溶性糖也出现升高-下降-升高的趋势,但时间点不一致;而淀粉的含量出现下降-上升的趋势。4)生根期间插穗基部韧皮部的IAA含量出现了2个峰值和一个谷值;而ZR含量在第40天达到峰值后下降;GA含量先下降后上升;ABA含量在插后的前期高后期低,且值都低于同期对照。IAA/ABA比值在插后的第40天(愈伤组织形成期)达到谷底,后又上升(不定根形成期)。IAA/GA在插后的40~60 d内快速上升,80 d后又开始大幅下降;IAA/ZR值在扦插愈伤组织形成期(40 d)呈下降趋势,到60 d时(不定根发生期)又急剧上升到峰值。【结论】高活性的SOD和POD有利于插穗初期愈伤组织的形成(40 d),高活性的POD与PPO有利于不定根的形成(60 d)。较高的IAA含量是保证愈伤组织形成(20~40 d)的必要条件,不定根形成期(60 d)需要较高的IAA/ZR、IAA/ABA、IAA/GA比值。本研究为金叶银杏扦插繁殖技术和生根机理的研究及金叶银杏苗木的快速繁殖生产提供技术支持。     

Key roles of leaves, stockplant age, and auxin concentration in vegetative propagation of two African mahoganies: Khaya anthotheca Welw. and Khaya ivorensis A. Chev

Leaf area, IBA concentration and age of stockplants were all found to be important factors for successful rooting for vegetative propagation using single-node cuttings of the two main African mahogany species: Khaya anthotheca and K. ivorensis. Cuttings with leaf area of 30–50 cm² had the best rooting percentage and cuttings with about 30 cm² had the most number of roots per cutting in K. anthotheca. Khaya ivorensis, cuttings with 10–30 cm² leaf area had the highest rooting percentage. Cuttings collected from 1-year-old stockplants recorded the highest rooting percentage and largest number of roots per cutting. Cuttings from 3-year-old stockplant of the same seeds sources had the lowest rooting suggesting aging negatively impacted rooting ability. The effect of auxin concentration, on rootability was examined with cuttings of K. anthotheca. An IBA concentration of 0.8% was the best exogenous auxin concentration for percentage rooting, number of roots per cutting and the length of the longest root per cutting.     

Mini-cuttings: an effective technique for the propagation of <Emphasis Type="Italic">Pinus pinaster</Emphasis> Ait.

Pinus pinaster Ait. is one of the main forest tree species planted in Spain, Portugal and France. Due to its high economic relevance, there is considerable interest in developing techniques for vegetative breeding aimed at mass propagation. In this study we present a mini-propagation protocol in order to define an efficient method to propagate families or clones of P. pinaster. We carried out three experiments using mini-cuttings of 3–5 cm in length with the aim of evaluating the effects of temperature (4°C vs. 25°C), plant growth regulator (IBA) and shoot age on rooting ability. Percentage of rooted cuttings and morphological root variables were recorded. The percentage of rooted cuttings per treatment ranged from 68 to 97%. Treatment with IBA significantly influenced the rooting process at 25°C but not at 4°C. The number of apexes, length, area and volume of roots were all positively affected by temperature treatment. Shoot age also had a positive effect on rooting capacity of cuttings, with the cuttings from the youngest shoots (70 days after pruning) having higher rooting percentages, ranging from 84.7 to 98.3%. The use of juvenile material, good environmental conditions and IBA all benefited the rooting of clonal material, resulting in high rooting capacity. This study presents an innovative propagation protocol for P. pinaster that can be used as a tool in breeding programs.     

Effects of cutting types and hormonal concentration on vegetative propagation of Zanthoxylum armatum in Garhwal Himalaya,India

Experiments were carried out to define the effects of hormonal concentrations on semi-hard wood(SHW) and hard-wood(HW) branch cuttings of the Z.armatum. SHW and HW cuttings were collected in the month of March. The SHW and HW cuttings were treated with different concentration of indole-3-acetic acid and indole-3-butyric acid(IAA and IBA) and placed in vermiculite rooting medium for 90 days under 1-min misting after 10 min. Sprouting, rooting percentage, sprout number, sprout length, root number, and length were measured.The highest rooting and sprouting rate, 64.0 %, was obtained at the 0.3 % IBA treatment in the SHW cuttings.Similarly sprout length and number of roots per cutting were also higher at the 0.3 % IBA treatment in the SHW cuttings. The number of shoots per cutting was higher at the 0.3 % IAA treatment in the SHW cuttings. Root length per cutting was higher in 0.4 % IBA treatment in the SHW cuttings. The results indicated that 0.3 and 0.4 % IBA treatment produce higher rooting percentages as well as the number of roots and their length in SHW cuttings. The HW cuttings produced maximum rate of 18.0 % rooting in0.5 % IBA treatment. The control set and lower concentrations of IBA and IAA completely failed to root in the mist chamber.     

印楝扦插繁殖影响因子分析

研究了激素种类、浓度、扦插基质、插条类型、生根时间和扦插季节对印楝扦插成活率的影响，结果表明：在云南3～5月印楝扦插成活率较高，其中以3月中下旬扦插效果最好；插条类型以1年生木质化枝最佳，扦插基质以河沙为好；经IBA处理的插穗成活率及生根时间均优于ABT1生根粉和2,4-D，该3种试验激素的最佳处理浓度均为1000mg／L。     

Clonal propagation of Pterocarpus santalinoides L'Hér. ex DC.: the effect of substrate,cutting type,genotype and auxin

Pterocarpus santalinoides is a multipurpose tree species, native to Africa and South America. However, excessive pruning for fodder is jeopardising its seed production leading to poor regeneration in the Sahel region. Efficient vegetative propagation techniques may overcome this concern. To address this issue, four experiments were conducted to determine the effects of substrate (Experiment 1), cutting type (Experiments 2 and 3), genotype (Experiment 4) and auxins (Experiments 1, 2, and 4) on rooting ability in a non-mist propagating unit in Mali. Among the four tested substrates, no significant differences were found in rooting parameters, including the percentage of rooted cuttings, the number of roots and secondary roots per rooted cutting, and the length of the longest root per rooted cutting. Semi-hardwood cuttings rooted significantly better than softwood cuttings with a higher percentage of rooted cuttings (31.7?±?6.5% vs. 9.2?±?2.7%), greater number of roots (8.2?±?4.8 vs 1.5?±?0.7), greater number of secondary roots (16.7?±?4.2 vs 4.6?±?1.8) and longer root length (17.8?±?12.0?cm vs 2.3?±?1.0?cm) per rooted cutting. In addition, one-node cuttings cut below the second and third nodes, respectively, had the highest rooting success (88% and 90%, respectively) followed by cuttings cut below the fourth node (68%) and the first node (62%). Significant differences in the percentage of rooted cuttings were found among 12 randomly selected genotypes with rooting varying from 2% to 75%.The results also showed that auxin application, especially IBA, had a significant effect on rooting success, the number of roots and secondary roots per rooted cutting. Single-node cuttings, and cuttings of 10?cm length with multiple softwood and semi-hardwood nodes, can be used with or without auxin treatment for successful clonal propagation of P. santalinoides. The results of the present study indicated that P. santalinoides is amenable to clonal propagation using low-cost propagators and sand-based rooting media.     

Adventitious root formation of Japanese cedar (Cryptomeria japonica D. Don) cuttings is stimulated by soaking basal portion of cuttings in warmed water while cooling their apical portion

To improve the propagation of Japanese cedar (Cryptomeria japonica D. Don), we investigated the effects of apical and basal temperatures during a water soaking treatment on the adventitious root formation of 70-mm long shoot tip cuttings which have an apical bud. The basal portion of the cuttings was soaked for 28 days in water with temperatures ranging from 10 to 35 °C, at an air temperature of 5 or 10 °C. Control cuttings were soaked in water at 25 °C, with an air temperature of 25 °C. Treated cuttings were then planted in vermiculite rooting medium and grown at an air temperature of 25 °C for 35 days. Adventitious roots initiated earlier and developed more in the cuttings treated with apical temperatures of 5 or 10 °C and basal temperatures of 20–30 °C than in the control cuttings. The rooting percentage was greatest (93 %) in the cuttings treated with a 10/25 °C apical/basal temperature, whereas few control cuttings rooted (13 %). This suggests that the temperature gradient created by warming the basal portion of the cuttings while cooling their apical end stimulates adventitious root formation. When we tested seasonal variation of rootability at 10/25 °C, the rooting percentage increased from early autumn to winter, and decreased from winter to summer. The soluble sugar contents did not directly affect the formation of adventitious roots in the present study.     

Effects of mother tree ages,different rooting mediums,light conditions and auxin treatments on rooting behaviour of <Emphasis Type="Italic">Dalbergia sissoo</Emphasis> branch cuttings

Dalbergia sissoo Roxb. is one of the promising multipurpose tree species of South Asia. Most of the plantations of D. sissoo from seeds are facing severe threats due to the die-back disease, which ultimately causes death of this potential tree-species within a few months. Vegetative propagation could avoid the die-back disease. Thirty mother trees of different age-groups of D. sissoo were selected for evaluating the rooting behaviour of branch cuttings from D. sissoo as influenced by auxins (IAA or IBA at 100, 200, 500 mg·L⁻¹), ages of mother trees (10, 4 and 2 years old) and different environment conditions, i.e., different mediums (soil and sand) or light conditions (in shade and open condition). The results show that application of IAA and IBA induced more numbers of cuttings (collected from 10-year-old mother trees) to root compared to control. Branch cuttings of D. sissoo collected from 10-year-old mother trees and planted in soil bed in open conditions had 100.0% of cuttings to root in IAA (100 mg·L⁻¹) and IBA (200 mg·L⁻¹) treatments. Both rooting medium (Soil and sand) influenced significantly (p<0.05) on rooting response of branch cuttings. Soil medium was found to achieve maximum no. of branch cuttings to root, compared to sand medium.     

吲哚丁酸对青海云杉硬枝扦插生根效应的影响

介绍了青海云杉硬枝扦插插穗生根的三种类型,主要研究IBA(吲哚-3丁酸)的不同浓度和不同处理时 间对青海云杉硬枝插穗生根的影响,以及不同单株间插穗生根情况的差异。比较了IBA对青海云杉1年生硬 枝进行不同处理的生根差异、萌芽情况和插穗腐烂情况,找出了较好的促进青海云杉插穗产生更多高质量根 的．IBA浓度和处理时间的组合(IBA 250 mg·kg-1处理12 h);并且对IBA不同浓度,不同处理时间与插穗生 根之间的关系以及衡量扦插效果的不同指标间相关性均进行了分析,讨论了在IBA处理下插穗上部芽的萌发 与插穗生根之间的关系。     

一品红扦插繁殖技术研究

以一品红品种‘安琪’为供试材料,研究了不同扦插方式、不同扦插季节、不同激素处理对扦插繁殖的影响,结果表明,于花泥中进行嫩枝扦插,插条生根率可高达92.4%;春夏季插条生根率要比秋冬季高约20%,插后生根时间缩短10 d;100 mg/L NAA 100 mg/L IAA的激素组合处理休眠枝16 h,扦插效果最佳。