Polysaccharides in some industrially important softwood species

The content and composition of carbohydrates comprising polysaccharides in sapwood and heartwood of 12 industrially important pulpwood species were analysed. The polysaccharide content was between 60% and 80% (w/w) for all species, with cellulose as the predominant polysaccharide type. The carbohydrate composition suggested that the main non-cellulose polysaccharides were galactoglucomannans, except in Larix heartwood, where arabinogalactans were predominant, while the content of xylans were in the same range as the mannans in Pinus resinosa heartwood and Thuja occidentalis heartwood and sapwood. Pectins, i.e. polygalacturonic acids, were the main acidic polysaccharides in all species. The amount and composition of water-soluble carbohydrates from ground wood samples were also analysed, since these are important in mechanical pulping and as a possible source of bioactive polymers. The main polysaccharides released from the spruce species were mannans, together with starch from sapwood. Especially Abies balsamea stemwood, but also Abies sibirica heartwood, released considerable amounts of pectins, suggesting that fir species may release more troublesome anionic polysaccharides than spruce species. Heartwood of Larix lariciana, Larix decidua, Pinus banksiana, and Pinus resinosa released considerable amounts of acidic arabinogalactans. Thuja occidentalis released mainly arabinogalactans and pectins. Pseudotsuga menziesii heartwood released a large amount of arabinogalactans.     

温度对人工林落叶松木材干缩及密度的影响

通过在不同的恒定的温度场中的试验,研究分析了人工林长白落叶松(Larix olgensis A.)木材干缩率、干缩比、心边材干缩差异及基本密度在不同温度条件下的变化规律,为合理地制定木材干燥工艺基准提供科学理论依据。     

Note sur l'aptitude lignivore du Lachnellula willkommii (Hartig) Dennis,agent du chancre du mélèze

Note on the wood destroying capacity of Lachnellula willkommii (Hartig) Dennis, the larch canker fungus. The wood destroying capacity of Lachnellula willkommii in larch was studied in vitro using a method based on loss of weight. Two species of larch and their hybrid were used. The behaviour of the fungus on sapwood and heartwood differed.     

Comparison of moisture distribution along radial direction in a log cross section of heartwood and mixed sapwood and heartwood during radio-frequency/vacuum drying

The purpose of this study was to compare the distribution of moisture contents (MCs) along the radial direction during radio-frequency/vacuum (RF/V) drying of log cross sections of heartwood (HLC) where sapwood was removed from a green log cross section and log cross section of mixed sapwood and heartwood (MLC) prepared with debarked logs of Japanese larch (Larix leptolepis) and locust (Robinia pseudoacacia). For Japanese larch, an even distribution of MC was observed over the entire cross section in HLC not only at the initial stage of drying but also up to the completion of drying. Furthermore, the moisture gradient between the outermost slice and the adjacent inner slice was more gradual compared with that in MLC. For locust, the moisture gradient between the outermost slice and the adjacent inner slice became severe as drying progressed. It decreased after reaching the maximum during the middle stage of drying but continued until the late stage of drying. Furthermore, despite the fact that the average initial MC of mixed slice within MLC was higher compared with that in heartwood slice, this trend reversed immediately after drying started. It was suggested that the possibility of formation of border checking would be high during drying the MLC, since it would be so complicate that the sapwood and heartwood reach fiber saturation point together because of differences in their green MCs and permeability between them.     

Clonal variation of carbon content in wood of Larix kaempferi (Japanese larch)

Variations in carbon content in wood among 102 clones, selected from almost the entire natural distribution area, were investigated in Larix kaempferi. The average carbon content was 50.50%, 50.94%, and 50.80% in sapwood, heartwood, and whole wood, respectively. The difference in carbon content between clones was significant. The clonal repeatabilities were 0.46, 0.38, and 0.44 in heartwood, sapwood and whole wood, respectively. The coefficients of variation in the clonal mean carbon content were only 0.43%, 0.42%, and 0.41% in heartwood, sapwood, and whole wood, respectively. This small genetic variation and resulting small relative genetic gain of carbon content indicate that the genetic improvement of carbon content by selection has a small effect on the genetic improvement of carbon sequestration capacity by selection in L. kaempferi.     

Resistance of Pinus leucodermis heartwood and sapwood against the brown-rot fungus Coniophora puteana

Abstract

This study assessed the decay resistance of Pinus leucodermis wood to the brown-rot fungus Coniophora puteana. Based upon the median weight losses of 30.65% for heartwood and of 34.68% for sapwood obtained in the biological tests, both the heartwood and sapwood material examined was classified as not durable (durability class 5) according to the CEN/TS 15083-1 classification. Total extractives were low, 3.93% in heartwood and 1.00% in sapwood, while lignin content was 22.60% and 25.41% in heartwood and sapwood, respectively. It is highly recommended to use protective treatments before using P. leucodermis wood in outdoor conditions.     

Heartwood and sapwood allometry of seven Chinese temperate tree species

? Allometry of sapwood/heartwood is essential for understanding tree growth, water transport and carbon allocation, timber production and use, but such an allometry is lacking for Chinese temperate tree species.

? We studied the allometry and development of heartwood and sapwood for seven Chinese temperate tree species: Korean pine (Pinus koraiensis Sieb. et Zucc), Dahurian larch (Larix gmelinii Rupr.), Japanese elm (Ulmus davidiana Planch var. japonica (Rehd.) Nakai), Manchurian ash (Fraxinus mandshurica Rupr.), Manchurian walnut (Juglans mandshurica Maxim.), Amur cork-tree (Phellodendron amurense Rupr.), and Mongolian oak (Quercus mongolica Fisch.).

? All heartwood parameters investigated, including heartwood radius (HR), heartwood formation rate (HFR), heartwood ring number (HRN), heartwood initiation age (HIA), and heartwood volume ratio (HVR), were positively correlated with tree cambial age (CA). The HR, sapwood width (SW), sapwood area (SA), heartwood and sapwood volumes were significantly related to stem diameter at breast height (DBH) or xylem diameter. There was a polynomial relationship between the sapwood ring longevity (SRL) and sapwood ring number (SRN). However, most of the allometric relationships were species-dependent. The hardwood formation patterns were different between coniferous and broadleaved tree species. A power function was suitable to scale SA from DBH, but the exponent varied from 1.32 for the larch to 2.19 for the cork-tree.

? Our allometry provided a practical means to assess wood development and related physiology for the temperate tree species.

     

Butt rot in conifers caused by Serpula himantioides (Fr.) Karst.

Serpula himantioides was found to be a causal agent of butt rot in Douglas fir and Japanese larch in northern Germany. The decay started predominantly from tap roots and main side roots and extended few meters into the stem. In final stages of rot the basal heartwood was completely destroyed and the residual width of healthy sapwood was reduced. Laboratory tests revealed a tolerance by the fungus to extremely acid substrates.     

Effects of basic density,annual growth and drying schedule on selected quality factors of dried Siberian larch (Larix sibirica) timber

Abstract

Siberian larch (Larix sibirica Ledeb.) timber is suitable for many uses in the mechanical wood industry. Drying it without any decrease in value, however, is difficult and slow. The purpose of this research was to compare the drying quality of Siberian larch timber dried with three different conventional schedules taking into account the density and annual growth of wood. Five drying tests were performed. The final moisture content (MC), MC gradient, cracks, deformations (bow, crook, twist and cup) and case hardening were measured from the dried timber. The basic density particularly affected the MC, as shown in the differences regarding dried wood, with the denser wood having higher final MC and MC gradient. It was also found that large annual growth increased some deformations. Most of the measured factors were best after drying at the highest temperatures used; however, a slightly different trend was observed for bow, twist and cup. MC factors and twisting were the most problematic properties in drying according to this study. Sorting Siberian larch timber, particularly according to density, would improve the MC properties of dried timber by ensuring sufficient drying time, as economically as possible, for each timber piece.     

Surface mould growth on wooden claddings – effects of transient wetting,relative humidity,temperature and material properties

ABSTRACT

Effects of climatic factors and material properties on the development of surface mould growth on wooden claddings were investigated in a laboratory experiment. Specimens of aspen (Populus tremula), Siberian larch (Larix Sibirica), American white oak (Querqus alba), Scots pine (Pinus sylvestris), Norway spruce (Picea abies) and thermally modified pine were incubated in eight climatic chambers at specified wetting periods (2 or 4?h per day), relative humidity (58–86%) and temperature conditions (10–27°C). Surface mould growth was assessed weekly for 13 weeks, and the results were evaluated statistically using Generalized Estimating Equations logistic regression models. All tested climatic factors had significant effects on the mould growth, and there were significant differences between the materials. The ranking of the materials varied with temperature and over time. Aspen, pine sapwood and oak were overall most susceptible to mould growth, and thermally modified pine least susceptible. There were significant differences between sapwood and heartwood for pine and spruce. The effect of density was tested on the spruce heartwood material, but was not found to be significant. The results can be used to further develop prediction models for mould growth on wooden claddings.     

Inter-clonal, intra-clonal, and single tree variations of wood anatomical properties and specific gravity of clonal ramets of Dalbergia sissoo Roxb.

Inter-clonal, intra-clonal and within tree variations in specific gravity and wood anatomical properties of 8-year-old grown ramets of Dalbergia sissoo Roxb. have been investigated. Radial and location-wise intra-clonal variations were non-significant for anatomical properties and specific gravity for all six clones at all three sites. However, inter-clonal variations in wood anatomical properties and specific gravity were significantly different. Inter-clonal variations in anatomical properties and specific gravity were also significant due to sites, which indicated that site-characteristics overshadowed the genetic priority of different clones for wood anatomical properties. Average fiber-characteristics of all clones showed the best performance at Lalkuan, Haldwani (site III), while average specific gravity performed well at Brandis Road, Dehradun (site I) followed by site III (Lalkuan, Haldwani) and site II (Lachchiwala, Dehradun). Within tree variations in anatomical properties like fiber length, fiber diameter, wall thickness, vessel member length and vessel member diameter due to vertical or radial direction and location (pith to periphery) are non-significant. Radial direction, location and height showed no impact on wood element variation. It indicated that there is no impact of juvenile wood, sapwood and heartwood ratio, and reaction wood on wood anatomical properties of 8-year-old ramet of D. sissoo. It further indicated that clone raised ramet of 8-year-old D. sissoo showed the characteristics of mature wood. Within tree variations in specific gravity were significant due to height, which may be related to differential sapwood and heartwood ratio in the vertical direction. Different wood elements viz. fiber length, fiber diameter, wall thickness, vessel member length and vessel member diameter showed significant correlations with each other and with specific gravity.     

Intratree Variability of Cleavage Resistance of Chinese Fir from Plantation

INTRODUCTION Chinese fir (Cunninghamia lanceolata) is a very important timber species in the southern China (Shi Jisen et al. 1987). It is good, fast-growing, and exempts from serious plant diseases. Its plantation is big in terms of size in the South of China and its storage stock is very rich, which is about 20% of the national commodity wood (Zhou Shuangquan et al. 2000). And the lumber becomes mainly commercial construction materials in China because of straight grain, light and so…     

Decay resistance of sapwood and heartwood of untreated and thermally modified Scots pine and Norway spruce compared with some other wood species

Abstract

Thermal modification has been developed for an industrial method to increase the biological durability and dimensional stability of wood. In this study the effects of thermal modification on resistance against soft- and brown-rot fungi of sapwood and heartwood of Scots pine and Norway spruce were investigated using laboratory test methods. Natural durability against soft-rot microfungi was determined according to CEN/TS 15083-2 (2005) by measuring the mass loss and modulus of elasticity (MOE) loss after an incubation period of 32 weeks. An agar block test was used to determine the resistance to two brown-rot fungi using two exposure periods. In particular, the effect of the temperature of the thermal modification was studied, and the results were compared with results from untreated pine and spruce samples. The decay resistance of reference untreated wood species (Siberian larch, bangkirai, merbau and western red cedar) was also studied in the soft-rot test. On average, the soft-rot and brown-rot tests gave quite similar results. In general, the untreated heartwood of pine was more resistant to decay than the sapwood of pine and the sapwood and heartwood of spruce. Thermal modification increased the biological durability of all samples. The effect of thermal modification seemed to be most effective within pine heartwood. However, very high thermal modification temperature over 230°C was needed to reach resistance against decay comparable with the durability classes of “durable” or “very durable” in the soft-rot test. The brown-rot test gave slightly better durability classes than the soft-rot test. The most durable untreated wood species was merbau, the durability of which could be evaluated as equal to the durability class “moderately durable”.     

Chemical characterization of Pinus halepensis sapwood and heartwood

ABSTRACT

This paper describes the chemical composition of sapwood (SW) and heartwood (HW) of Pinus halepensis Mill stem. Extractives were first isolated by accelerated solvent extraction and then analysed by gas chromatography-mass spectrometry (GC-MS). The cellulosic polysaccharide content present in the pre-extracted wood samples was determined with acid hydrolysis and GC. The hemicelluloses content was determined with acid methanolysis and GC. Free monomers were additionally analysed by GC. The amount of lignin was determined gravimetrically by the Klason lignin method and the acid-soluble lignin was determined by a UV method. Formic and acetic acids in wood were determined after alkaline hydrolysis and analysed by HP-SEC. It was found that lipophilic and hydrophilic extractives were more abundant in heartwood (1.6% and 2.5%) than in sapwood (1.1% and 1.8%). Celluloses content was higher in sapwood (42.5%) than in heartwood (39.7%), whereas lignin, hemicelluloses and sugar monomer contents were more abundant in heartwood (28.9%, 26.8% and 0.3%) than in sapwood (28.0%, 24.5% and 0.2%). The variation in acetic and formic acids and ash contents between sapwood (0.7%, 0.2% and 0.5%) and heartwood (0.6%, 0.1% and 0.4%) was small. The acetylation degrees were found to be slightly similar in sapwood (0.4) and heartwood (0.3).     

Some factors influencing susceptibility to discoloring fungi and water uptake of Scots pine (Pinus sylvestris), Norway spruce (Picea abies) and Oriental spruce (Picea orientalis)

Abstract

The heartwood and sapwood from Scots pine (PS), Norway spruce (PA), and Oriental spruce (PO) were tested for susceptibility to discoloring fungi and water uptake. In addition, annual ring width and density were measured. The methods used were Mycologg for testing growth of fungi and a modified version of EN 927-5 to investigate water uptake. For pine, the heartwood showed a lower water uptake and no discoloring fungi growing in the tests. The heartwood had a significantly higher density and smaller annual ring width than the sapwood. In PA the heartwood had significantly lower discoloration than sapwood. The total water uptake in g/m² was significantly higher in sapwood, but not the calculated moisture content. As for wood properties, the density was significantly higher in sapwood compared to heartwood, although there were no differences in annual ring width. Regarding PO, differences in water uptake could be seen between sapwood and heartwood although the densities were similar. These results show that susceptibility to discoloring fungi and water uptake is hard to correlate to a single inherent property when looking at different wood species.     

Production of hybrid seed in a seed orchard of two larch species,Larix sibirica and Larix decidua

The larch seed orchard studied is intended to produce interspecific hybrid seed between Larix sibirica and Larix decidua. Only the L. sibirica clone (half of the grafts) in the orchard was intended to act as the seed parent, and the six L. decidua clones are pollinators. The proportion of hybrid seed produced was determined using Mdh3 locus as a genetic marker. The mean percentage of hybrid seed produced by the grafts of L. decidua was 93, but that of the hybrid seed produced by L. sibirica was only 18. The results can be explained by differences in flowering abundance. The grafts of L. sibirica produced several times more pollen than those of L. decidua. Contrary to the original plans, L. decidua should be used as the seed parent and L. sibirica only as the pollen parent in the studied seed orchard.     

Degradation of Norway spruce (Picea abies) heartwood and sapwood during 5.5 years’ above-ground exposure

Abstract

Differences in durability between heartwood and sapwood of Norway spruce [Picea abies (L.) Karst.] were investigated to determine wood qualities most favourable for use in outdoor constructions above ground. Trees grown on sites with either good or poor access to water were used. Seventy-eight specimens measuring 20 × 50 × 300?mm³ separated into heartwood and sapwood, half untreated, half painted, were exposed horizontally outdoors above ground for 5.5?years with the pith side up and the bark side down. Crack length and crack number were measured. Fungus growth and surface changes were visually estimated. Fungus type was determined by microscopic analysis. The main finding was that spruce heartwood had fewer and shorter cracks and less surface-discolouring fungus growth than sapwood. This was valid for both painted and untreated wood. After 2?years’ exposure, the cracks in sapwood (upper surface) were more than three times longer and about five times more numerous than in heartwood for both painted and untreated boards. Microscopic study showed that surface discoloration was due mainly to Aureobasidium pullulans, together with a few other discolouring fungi. After 5.5?years, initial decay was established on the surface and in the end grain of four untreated test objects.     

The influence of heartwood on the pulping properties of Acacia melanoxylon wood

The pulping wood quality of Acacia melanoxylon was evaluated in relation to the presence of heartwood. The sapwood and heartwood from 20 trees from four sites in Portugal were evaluated separately at 5% stem height level in terms of chemical composition and kraft pulping aptitude. Heartwood had more extractives than sapwood ranging from 7.4% to 9.5% and from 4.0% to 4.2%, respectively, and with a heartwood-to-sapwood ratio for extractives ranging from 1.9 to 2.3. The major component of heartwood extractives was made up of ethanol-soluble compounds (70% of total extractives). Lignin content was similar in sapwood and heartwood (21.5% and 20.7%, respectively) as well as the sugar composition. Site did not influence the chemical composition. Pulping heartwood differed from sapwood in chemical and optical terms: lower values of pulp yield (53% vs 56% respectively), higher kappa number (11 vs. 7), and lower brightness (28% vs 49%). Acacia melanoxylon wood showed an overall good pulping aptitude, but the presence of heartwood should be taken into account because it decreases the raw-material quality for pulping. Heartwood content should therefore be considered as a quality variable when using A. melanoxylon wood in pulp industries     

Radial distribution patterns of the green moisture content in trunks of 46-year-old red cypress (<Emphasis Type="Italic">Chamaecyparis formosensis</Emphasis>)

Understanding the green moisture content and wood density is important for effective forest management. Radial distribution patterns in the green moisture content (MC) and basic density (BD) in stems of red cypress (Chamaecyparis formosensis) were investigated in 69 plantation trees that were 46 years old. An increment core was collected from each sample tree at breast height (1.3 m). Five radial positions were defined: pith piece (Pith), inner heartwood (IHW), outer heartwood (OHW), intermediate wood (TSH), and sapwood (SW). Results showed that the average MC was highly dependent on the individual tree. Average values of the MC obtained from the TSH were significantly lower than those for the other positions. The MC of heartwood was higher than that of SW. Distribution patterns of the MC in the radial direction varied among trees. Radial variations in MC and BD were greater than in between-tree variations. Six types of radial distribution patterns of MC were detected for sample trees. MC values increased with decreasing BD (except for the TSH). Positive correlations were found between adjacent sampling positions in both MC and BD.     

黑木相思株内木材基本材性变化与树龄关系的研究

对不同树龄和径向位置黑木相思木材的物理和主要力学性质测定研究表明:黑木相思株内边材、心材密度和主要力学性质随着树龄的增大而增大,径向和弦向的体积干缩率随着树龄的增大而减小;相同树龄黑木相思的边材密度和力学性能比心材小,干缩率比心材大.因此,在利用黑木相思时应对树龄、心边材径向位置加以特别考虑.