Effect of Amylose Content on Gelatinization,Retrogradation, and Pasting Properties of Starches from Waxy and Nonwaxy Wheat and Their F1 Seeds

We studied the effect of amylose content on the gelatinization, retrogradation, and pasting properties of starch using wheat starches differing in amylose content. Starches were isolated from waxy and nonwaxy wheat and reciprocal F1 seeds by crossing waxy and nonwaxy wheat. Mixing waxy and nonwaxy wheat starch produced a mixed starch with the same amylose content as F1 seeds for comparison. The amylose content of F1 seeds ranged between waxy and nonwaxy wheat. Nonwaxy‐waxy wheat had a higher amylose content than waxy‐nonwaxy wheat. Endothermic enthalpy and final gelatinization temperature measured by differential scanning calorimetry correlated negatively with amylose content. Gelatinization onset and peak temperature clearly differed between F1 and mixed starches with the same amylose content as F1 starches. Enthalpy for melting recrystallized starches correlated negatively with amylose content. Rapid Visco Analyser measurement showed that F1 starches had a higher peak viscosity than waxy and nonwaxy wheat starches. Mixed starches showed characteristic profiles with two low peaks. Setback and final viscosity correlated highly with amylose content. Some of gelatinization and pasting properties differed between F1 starches and mixed starches.     

Physicochemical and Structural Characteristics of Flours and Starches from Waxy and Nonwaxy Wheats

A waxy spring wheat (Triticum aestivum L.) genotype was fractionated into flour and starch by roller and wet‐milling, respectively. The resultant flour and starch were evaluated for end‐use properties and compared with their counterparts from hard and soft wheats and with commercial waxy and nonwaxy corn (Zea mays L.) starches. The waxy wheat flour had exceptionally high levels of water absorption and peak viscosity compared with hard or soft wheat flour. The flour formed an intermediate‐strength dough that developed rapidly and was relatively susceptible to mixing. Analysis by differential scanning calorimetry and X‐ray diffractometry showed waxy wheat starch had higher gelatinization temperatures, a greater degree of crystallization, and an absence of an amylose‐lipid complex compared with nonwaxy wheat. Waxy wheat and corn starches showed greater refrigeration and freeze‐thaw stabilities than did nonwaxy starches as demonstrated by syneresis tests. They were also similar in pasting properties, but waxy wheat starch required lower temperature and enthalpy to gelatinize. The results show analogies between waxy wheat and waxy corn starches, but waxy wheat flour was distinct from hard or soft wheat flour in pasting and mixing properties.     

Properties of Starches from Several Low‐Amylose Rice Cultivars

The starch properties of five low‐amylose rice cultivars, Yawarakomachi, Soft 158, Hanabusa, Aya, and Snow Pearl, were compared with those of two normal amylose rice cultivars, Nipponbare and Hinohikari. There were no large differences in the distributions of the amylopectin chain length determined by high‐performance anion‐exchange chromatography, and the starch gelatinization properties determined by differential scanning calorimetry, between normal and low‐amylose rice cultivars. Results obtained using rapid viscosity analysis indicated that low‐amylose rice starches had lower peak viscosity, breakdown, and setback values than normal amylose rice starches. Starch granules from low‐amylose rice cultivars had a higher susceptibility to glucoamylase than those from normal amylose rice cultivars. The results of this study showed some differences between normal and low‐amylose rice starches in pasting properties and enzymatic digestibility.     

Physicochemical Properties and In Vitro Starch Digestibility of Cooked Rice from Commercially Available Cultivars in Canada

The influence of amylose content, cooking, and storage on starch structure, thermal behaviors, pasting properties, and rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) in different commercial rice cultivars was investigated. Long grain rice with high‐amylose content had a higher gelatinization temperature and a lower gelatinization enthalpy than the other rice cultivars with intermediate amylose content (Arborio and Calrose) and waxy type (glutinous). The intensity ratio of 1047/1022 cm^–1 determined by Fourier Transform Infrared (FT‐IR), which indicated the ordered structure in starch granules, was the highest in glutinous and the lowest in long grain. Results from Rapid ViscoAnalyser (RVA) showed that the rice cultivar with higher amylose content had lower peak viscosity and breakdown, but higher pasting temperature, setback, and final viscosity. The RDS content was 28.1, 38.6, 41.5, and 57.5% in long grain, Arborio, Calrose, and glutinous rice, respectively, which was inversely related to amylose content. However, the SDS and RS contents were positively correlated with amylose content. During storage of cooked rice, long grain showed a continuous increase in pasting viscosity, while glutinous exhibited the sharp cold‐water swelling peak. The retrogradation rate was greater in rice cultivars with high amylose content. The ratio of 1047/1022 cm^–1 was substantially decreased by cooking and then increased during storage of cooked rice due to the crystalline structure, newly formed by retrogradation. Storage of cooked rice decreased RDS content and increased SDS content in all rice cultivars. However, no increase in RS content during storage was observed. The enthalpy for retrogradation and the intensity ratio 1047/1022 cm^–1 during storage were correlated negatively with RDS and positively with SDS (P ≤ 0.01).     

Characteristics of Starch from Eight Quinoa Lines

Starches ranging in amylose content from 3 to 20% from eight quinoa (Chenopodium quinoa Willd.) lines were characterized with respect to thermal, retrogradation, and pasting properties; swelling and solubility behavior; freeze‐thaw stability; water‐binding capacity; shear stability; and granule size and morphology. The starches differed in gelatinization onset temperatures, peak temperatures, and retrogradation tendencies; these characteristics were positively correlated with amylose content. No variation in gelatinization enthalpy was observed. With the exception of pasting temperature, large variations in pasting characteristics were found among starches and were correlated with amylose content. Swelling, solubility, freeze‐thaw stability, and water‐binding capacity also differed among starches and were correlated with amylose content. Granule morphology and size were similar for all starches. The wide variation in amylose content and physicochemical characteristics of quinoa starches suggests applications in a variety of food and nonfood products.     

A Comparative Study on Pasting and Hydration Properties of Native Rice Starches and Their Mixtures

Four rice starches were isolated from waxy and nonwaxy rice cultivars collected from different places in China. Individual rice starches were examined, along with their corresponding mixtures in different ratios, in terms of pasting and hydration properties. Analysis by micro‐viscoamylography (MVAG) showed that waxy rice starch and its blends had higher peak viscosity (PV), breakdown (BD), and setback (SB) than the remaining starches and mixtures. Apparent amylose content (AC) was 16.95–29.85% in nonwaxy individual rice starches and 13.69–25.07% in rice starch blends. Incorporating waxy rice starch (25%) significantly decreased the AC. AC correlated negatively with swelling power (SP) (r = ‐0.925, P < 0.01). SP exhibited nonlinear relationship (r² = 0.8204) with water solubility (WS) and both increased with temperature. The correlation showed that WS is also an index of starch characteristics and the granules rigidity affected the granule swelling potential. The results show that turbidity of gelatinized starch suspensions stored at 4 ± 0.5°C generally increased during storage up to five days.     

Composition,Molecular Structure,Properties, and In Vitro Digestibility of Starches from Newly Released Canadian Pulse Cultivars

Pulse starches were isolated from different cultivars of pea, lentil, and chickpea grown in Canada under identical environmental conditions. The in vitro digestibility and physicochemical properties were investigated and the correlations between the physicochemical properties and starch digestibility were determined. Pulse starch granules were irregularly shaped, ranging from oval to round. The amylose content was 34.9–39.0%. The amount of short A chains (DP 6‐12) of chickpea starch was much higher than the other pulse starches, but the proportions of B1 and B2 chains (DP 13‐24 and DP 25‐36, respectively) were lower. The X‐ray pattern of all starches was of the C type. The relative crystallinity of lentil (26.2–28.3%) was higher than that of pea (24.4–25.5%) and chickpea starches (23.0–24.8%). The swelling factor (SF) in the temperature range 60–90°C followed the order of lentil ≈ chickpea > pea. The extent of amylose leaching (AML) at 60°C followed the order of pea ≈ chickpea > lentil. However, in the temperature range 70–90°C, AML followed the order of lentil > pea > chickpea. The gelatinization temperatures followed the order of lentil > pea > chickpea. The peak viscosity, setback, and final viscosity of pea starch were lower than those of the other starches. Lentil starch exhibited lower rapidly digestible starch (RDS) content, hydrolysis rate, and expected glycemic index (eGI). The resistant starch (RS) content of both lentil cultivars was nearly similar. However, pea and chickpea cultivars exhibited wide variations in their RS content. Digestibility of the pulse starches were significantly correlated (P < 0.05) with swelling factor (60°C), amylose leaching (60°C), gelatinization temperature, gelatinization enthalpy, relative crystallinity, and chain length distribution of amylopectin (A, B1, and B2 chains).     

Rheological and physicochemical properties of starches from moist- and dry-type sweetpotatoes

Although starch makes up from 50 to 70% of sweetpotato (SP) dry matter, its role in cooked texture is unknown. The purpose of this research was to characterize raw starches isolated from SP cultivars and experimental selections (C/S) with a wide range of textural properties when cooked and to investigate the relationship between textural properties of the cooked roots and characteristics of the isolated starches. Shear stress measured by uniaxial compression of cooked SP cylinders served as an objective measure of SP texture. Starches were isolated from C/S representing three SP texture types: moist (Jewel and Beauregard); intermediate (NC10-28 and NC2-26); and dry (NC6-30 and NC8-22). The following parameters of isolated starches were measured: amylose content by colorimetric and differential scanning calorimetric (DSC) methods; swelling power, solubility, gelatinization enthalpy (DeltaH), and pasting properties by Brabender amylograph (BA) and rapid viscoanalyzer (RVA). Pasting temperatures for SP C/S measured by BA and RVA were significantly correlated. Due to high shear degradation in RVA, RVA viscosities of starch suspensions decreased as much as 40% during cooking at 95 degrees C, whereas the BA viscosities changed little at this temperature. There were no statistically significant differences among the C/S for amylose or DeltaH. However, significant C/S differences in swelling power, solubility, and pasting properties were observed. Although differences in some rheological and physical properties were observed for C/S starches, shear stress was statistically correlated only with DSC onset temperature (r = 0.78), indicating that factors other than the properties measured on isolated starches are mainly responsible for the texture of cooked SP C/S.     

Relationship Between Physicochemical Properties of Starches and White Salted Noodle Quality in Japanese Wheat Flours

This study describes the effect of starch properties of Japanese wheat flours on the quality of white salted noodles (WSN). Starch was isolated from 24 flours of 17 Japanese cultivars and amylose content was determined along with pasting properties by Rapid Visco Analyser (RVA), thermal properties by differential scanning calorimetry (DSC), and the distribution of amylopectin chain length by high‐performance anion exchange chromatography (HPAEC). Twenty flours were used to prepare WSN. As expected, 5–6% lower amylose content was associated with good WSN quality (higher scores in softness, elasticity, and smoothness). RVA analysis indicated that the pasting temperature had the greatest influence on WSN quality, while breakdown and setback showed slight effects on WSN quality. DSC results showed that lower endothermal enthalpy (ΔH) in the amylose‐lipid complex was associated with good WSN quality. Chainlength distribution of amylopectin by HPAEC was not an important factor in relation to WSN quality.     

Gelatinization,Pasting, and Gelling Properties of Sweetpotato and Wheat Starch Blends

Sweetpotato starch is high yielding but has very limited uses. It is possible to expand its application by blending it with other starches to obtain novel properties. In this study, functional properties of the blends of native sweetpotato starch with native, acid‐thinned, and hydroxypropylated wheat starch were studied at different ratios (75:25, 50:50, 25:75). The swelling factor, extent of amylose leaching, pasting, and gel textural properties of the blends were nonadditive of their individual components, and could be mathematically modeled by quadratic equations in relation to the ratios. Two peaks during pasting were observed for some starch mixtures studied by Rapid ViscoAnalyser (RVA). The gelatinization and retrogradation enthalpies (ΔH) of the blends were additive of their individual components and could be modeled by linear equations. All starch mixtures exhibited two peaks during differential scanning calorimetry (DSC) scan for gelatinization, but a single peak for retrograded starches. This study may provide basis for formulation of mixtures using starch from diverse sources to develop more natural starch systems with a range of physicochemical properties.     

Genetic Diversity in Physical Properties of Starch from a World Collection of Amaranthus

Physical and functional properties of starches isolated from 93 noncultivated genotypes of nine Amaranthus species from a world germ plasm collection and an additional 31 cultivated Amaranthus genotypes obtained from China were tested. A wide variation was found in the properties tested among the Amaranthus species and among genotypes within the same species. When comparing starches from cultivated and noncultivated genotypes, it was generally found that amylose was lower; starch pasting profiles were more consistent with higher peak viscosity, lower breakdown, and lower setback; the gelatinization temperature was lower; and energy of enthalpy was higher. Under cool storage, the hardness of cultivated starch pastes was lower and the adhesiveness was higher. As expected, amylose content was a primary factor affecting the physical and functional properties of Amaranthus starch. Compared with reference maize, rice, and wheat starches, Amaranthus starch tended to have lower hot paste viscosity and lower cool paste viscosity; and higher gelatinization temperatures and higher energy of enthalpy. Furthermore, Amaranthus starch pastes showed less change of gel hardness and adhesiveness after cold storage. The environmental effect on the different properties of starch varied among Amaranthus species. It is suggested that Amaranthus starches can be developed for a wide range of food uses.     

Structure and Functionality of Barley Starches

Amylose contents of prime starches from nonwaxy and high-amylose barley, determined by colorimetric method, were 24.6 and 48.7%, respectively, whereas waxy starch contained only a trace (0.04%) of amylose. There was little difference in isoamylase-debranched amylopectin between nonwaxy and high-amylose barley, whereas amylopectin from waxy barley had a significantly higher percentage of fraction with degree of polymerization < 15 (45%). The X-ray diffraction pattern of waxy starch differed from nonwaxy and high-amylose starches. Waxy starch had sharper peaks at 0.58, 0.51, 0.49, and 0.38 nm than nonwaxy and high-amylose starches. The d-spacing at 0.44 nm, characterizing the amylose-lipids complex, was most evident for high-amylose starch and was not observed in waxy starch. Differential scanning calorimetry (DSC) thermograms of prime starch from nonwaxy and high-amylose barley exhibited two prominent transition peaks: the first was >60°C and corresponded to starch gelatinization; the second was >100°C and corresponded to the amylose-lipid complex. Starch from waxy barley had only one endothermic gelatinization peak of amylopectin with an enthalpy value of 16.0 J/g. The retrogradation of gelatinized starch of three types of barley stored at 4°C showed that amylopectin recrystallization rates of nonwaxy and high-amylose barley were comparable when recrystallization enthalpy was calculated based on the percentage of amylopectin. No amylopectin recrystallization peak was observed in waxy barley. Storage time had a strong influence on recrystallization of amylopectin. The enthalpy value for nonwaxy barley increased from 1.93 J/g after 24 hr of storage to 3.74 J/g after 120 hr. When gel was rescanned every 24 hr, a significant decrease in enthalpy was recorded. A highly statistically significant correlation (r = 0.991) between DSC values of retrograded starch of nonwaxy barley and gel hardness was obtained. The correlation between starch enthalpy value and gel hardness of starch concentrate indicates that gel texture is due mainly to its starch structure and functionality. The relationship between the properties of starch and starch concentrate may favor the application of barley starch concentrate without the necessity of using the wet fractionation process.     

Starch Characteristics of Waxy and Nonwaxy Tetraploid (Triticum turgidum L. var. durum) Wheats

Manufacture of pasta products is paramount for durum wheat (Triticum turgidum L. var. durum). The recent development of waxy durum wheat containing starch with essentially 100% amylopectin may provide new food processing applications and present opportunities for value‐added crop production. This investigation was conducted to determine differences in some chemical and functional properties of waxy durum starch. Starch was isolated from two waxy endosperm lines and four nonwaxy cultivars of durum wheat. One of the waxy lines (WX‐1) was a full waxy durum wheat whereas the other line (WX‐0) was heterogeneous, producing both waxy and nonwaxy seed. Effects on starch swelling, solubility, pasting, gelatinization, and retrogradation were examined. The full waxy starch had four times more swelling power than the nonwaxy durum starches at 95°C, and was also more soluble at three of the four temperatures used. Starch pasting occurred earlier and peak viscosities were greater for starches from both waxy lines than for the nonwaxy starches, but their slurries were less stable with continued stirring and heating. Greater energy was required to melt gelatinized waxy starch gels, but no differences were found in either refrigerated storage or freeze‐thaw retrogradation, as determined by differential scanning calorimetry. The results of this investigation showed some significant differences in the starch properties of the waxy durum wheat lines compared to the nonwaxy durum wheats.     

Investigation of Digestibility In Vitro and Physicochemical Properties of A‐ and B‐Type Starch from Soft and Hard Wheat Flour

In this study, the functional properties of A‐ and B‐type wheat starch granules from two commercial wheat flours were investigated for digestibility in vitro, chemical composition (e.g., amylose, protein, and ash content), gelatinization, retrogradation, and pasting properties. The branch chain length and chain length distribution of these A‐ and B‐type wheat starch granules were also determined using high‐performance anion exchange chromatography (HPAEC). Wheat starches with different granular sizes not only had different degrees of enzymatic hydrolysis and thermal and pasting properties, but also different molecular characteristics. Different amylose content, protein content, and branch chain length of amylopectin in A‐ and B‐type wheat starch granules could also be the major factors besides granular size for different digestibility and other functional properties of starch. The data indicate that different wheat cultivars with different proportion of A‐ and B‐type granular starch could result in different digestibility in wheat products.     

Increase in Apparent Amylose Content and Change in Starch Pasting Properties at Cool Growth Temperatures in Mutant Wheat

Some mutant wheat lines with low‐amylose content were grown in a field and greenhouse (15 or 20°C) to compare apparent amylose content and starch pasting properties. The apparent amylose content of flour and starch increased and starch pasting parameters as measured by a Rapid Visco Analyser (RVA) changed in the greenhouse (at cool temperatures) during seed maturation. Densitometric analysis of the protein band separated by electrophoresis suggested that the increase in amylose content by cool temperature was related to the amount of Wx‐D1 protein. This data suggests that the Wx‐D1 gene was responsible for these changes. In wheat starch from Tanikei A6099 and Tanikei A6598 at 15°C, the value of final viscosity and total setback was higher than that from the field. In wheat starch from Tanikei A6599‐4 (waxy mutant with stable hot paste viscosity), the peak viscosity temperature was higher and time maintained >80% of the peak was shorter at 15°C than that from the field. Genetic analysis using doubled‐haploid (DH) lines from a combination of Tanikei A6599‐4 and Kanto 118 (low‐amylose line) showed that apparent amylose content increased and the starch pasting curve and properties changed in waxy progenies similar to Tanikei A6599‐4.     

Thermal Properties of Starch in Corn Variants Isolated After Chemical Mutagenesis of Inbred Line B73

The starch from eight ethyl methanesulfonate (EMS) treated M4 families of the corn (Zea mays L.) inbred line B73 was analyzed using differential scanning calorimetry (DSC), a Rapid Visco Analyser (RVA), a texture analyzer (TA), and scanning electron microscopy (SEM) coupled with image analysis. The eight families were chosen from 144 families previously selected for having starch with unusual DSC parameters. Apparent amylose contents of the starch from the eight families generally were lower than that of the control. According to DSC, starches from mutagenized families tended to have lower onset temperature (T₀) of gelatinization, enthalpy (ΔH) of gelatinization, and peak height index (PHI), but broader gelatinization range (R) than the B73 control. Their values for ΔH and percentage of retrograzdation (%R) were clustered around that of the control. Pasting properties from the RVA of the starches from the M4 families also were clustered around those of the control B73 starch, except for the setback values which were lower than B73 for M4 starches. Gel firmness values, as measured by TA, of all the M4 starches were generally lower than that of the B73 starch at storage treatments of one day at 25°C or seven days at 4°C. The stickiness of the gels of the M4 starches tended to be greater than that of B73 after seven days of storage at 4°C. These observations were consistent with the lower apparent amylose values for the M4 starches. SEM and image analysis data revealed no differences among the treatments in granule size and shape. Possibly, EMS treatment altered the genes, affecting internal structure of the starch granules. Starch from the mutagenized families likely had lower bonding forces among molecules and fewer long chains in the amylopectin molecules than did B73.     

Pasting Characteristics of Maize Starch Heat‐Treated with Different Water‐Ethanol Mixtures

Pasting characteristics of maize starch heat‐treated with six different water‐to‐ethanol ratios (%wt base 0:100, 10:90, 20:80, 30:70, 40:60, 50:50) were investigated; treated starches were called EW 0, 10, 20, 30, 40, and 50, respectively. Endotherms in DSC analysis shifted to a higher temperature as the water content in water‐ethanol mixture increased. The removed amount of fatty acids was much higher in treatments for EW 10, 20, and 30. The RVA peak viscosity of EW 10 and 20 were highest among the treated starches and setbacks were more than twice that of untreated starch. The characteristic change in the RVA viscogram corresponded to the amount of leached amylose from the granule. EW 30 displays similar properties as conventional heat‐moisture‐treated starch, but maintained a higher viscosity of ≈300 RVU throughout the heating process. In treatment with water‐ethanol mixtures, heat‐moisture treatment and defatting effects generated new types of modified starches. EW 40 and 50 had no clear pasting peak on RVA, and showed a viscosity at low temperature similar to granular cold water gelling.     

Molecular and Gelatinization Properties of Rice Starches from IR24 and Sinandomeng Cultivars

The differences in pasting properties involving gelatinization and retrogradation of rice starches from IR24 and Sinandomeng cultivars during heating‐cooling processes were investigated using a Rapid Visco Analyser (RVA)and a dynamic rheometer. The results were discussed in relation to the molecular structure, actual amylose content (AC), and concentration of the starches. Generally, both starches possessed a comparable AC (≈11 wt%), amylose average chain length (CL), iodine absorption properties, and dynamic rheological parameters on heating to 95°C at 10 wt% and on cooling to 10°C at higher concentrations. In contrast to Sinandomeng, IR24 amylose had a greater proportion of high molecular weight species and number‐average degree of polymerization (DP_n). IR24 amylopectin possessed a lower DP_n and greater CL, exterior CL (ECL), and interior CL (ICL). Comparing the results of RVA analysis and dynamic rheology, the gelatinization properties and higher retrogradation tendencies of IR24 starch can be related to the structural properties and depend on starch concentration. In addition, the exponent n of starch concentration for storage moduli at 25°C (G′₂₅ ∝ Cⁿ) increased linearly with increasing AC.     

Physicochemical Properties of Normal and Waxy Job's Tears (Coix lachryma-jobi L.) Starch

Physicochemical properties of starches from eight coix (Coix lachrymajobi L.) accessions were investigated. There was considerable variation in most measured traits, generally corresponding to the separation into waxy and normal amylose types. The amylose contents of five normal coix ranged from 15.9 to 25.8%, and those of three waxy coix were 0.7–1.1%. Swelling power of waxy coix starches varied between 28.6 and 41.0 g/g, generally higher than waxy maize. Normal coix starches had significantly higher gelatinization peak temperature (T_p) than the normal maize, 71.9–75.5°C. The T_p of waxy coix starches was 71.1–71.4°C, similar to waxy maize. Rapid Visco-Analyser (RVA) pasting profiles of normal coix showed little variation and closely matched the normal maize starch profile. Pasting profiles of waxy coix showed more variation and had lower peak viscosities than waxy maize starch. Waxy coix starches formed very weak gels, while the gel hardness of normal coix starches was 11.4–31.1 g. Amylose content was the main factor controlling differences in starch properties of the coix starches.     

Bread Quality of Spelt Wheat and Its Starch

Flours from five spelt cultivars grown over three years were evaluated as to their breadbaking quality and isolated starch properties. The starch properties included amylose contents, gelatinization temperatures (differential scanning calorimetry), granule size distributions, and pasting properties. Milled flour showed highly variable protein content and was higher than hard winter wheat, with short dough‐mix times indicating weak gluten. High protein cultivars gave good crumb scores, some of which surpassed the HRW baking control. Loaf volume was correlated to protein and all spelt cultivars were at least 9–51% lower than the HRW control. Isolated starch properties revealed an increase in amylose in the spelt starches of 2–21% over the hard red winter wheat (HRW) control. Negative correlations were observed for the large A‐type granules to bread crumb score, amylose level, and final pasting viscosity for cultivars grown in year 1999 and to pasting temperature in 1998 samples. Positive correlations were found for the small B‐ and C‐type granules relative to crumb score, loaf volume, amylose, and RVA final pasting viscosity for cultivars grown in 1999, and to RVA pasting temperature for samples grown in 1998. The environmental impact on spelt properties seemed to have a greater effect than genetic control.