Response of sunflower to potassium and magnesium fertilizers in calcerous soils in central Anatolia of Turkey

This research was carried out to determine the effects of potassium [0, 40, 80, 120 kg potassium oxide (K₂O) ha^?1] and magnesium (0, 20, 40, 60 kg magnesium oxide (MgO) ha^?1) applied into soil separately and together on the grain yield and yield components of sunflower for oil grown in two farmer fields in the semi-arid Central Anatolia in 2009 and 2010. The experiments were set as factorial experiment design in randomized blocks and 4 replicates. Potassium and Mg-fertilizers were used in the single time into base in the sowing. According to the results, K application in the increasing doses increased yield components more than that of Mg. Together giving of the K and Mg in certain combinations took the yield components to maximum levels. The highest grain yields were obtained by the K₄₀Mg₄₀ in the first year (7313 kg ha^?1) and by the Mg₆₀ in the second year (6510 kg ha^?1).     

Optimal Acidity Indices for Soybean Production in Brazilian Oxisols

Soybean is an important crop for the Brazilian economy, and soil acidity is one of the main yield-limiting factors in Brazilian Oxisols. A field experiment was conducted during three consecutive years with the objective to determine soybean response to liming grown on Oxisols. Liming rates used were 0, 3, 6, 12, and 18 Mg ha^?1. Liming significantly increased grain yield in a quadratic trend. Ninety percent maximum economic grain yield (2900 kg ha^?1) was achieved with the application of about 6 Mg lime ha^?1. Shoot dry weight, number of pods per plant, and 100-grain weight were also increased significantly in a quadratic fashion with increasing liming rate from 0 to 18 Mg ha^?1. These growth and yield components had a significant positive association with grain yield. Maximum contribution in increasing grain yield was of number of pods per plant followed by grain harvest index and shoot dry weight. Uptake of nitrogen (N) was greatest and phosphorus (P) was least among macronutrients in soybean plant. Nutrient-use efficiency (kg grain per kg nutrient accumulation in grain) was maximum for magnesium (Mg) and lowest for N among macronutrients. Application of 3 Mg lime ha^?1 neutralized all aluminum ions in soil solution. Optimal acidity indices for 90% of maximum yield were pH 6.0, calcium (Ca) 1.6 cmol_c kg^?1, Mg 0.9 cmol_c kg^?1, base saturation 51%, cation exchange capacity (CEC) 4.8 cmol_c kg^?1, Ca/Mg ratio 1.9, Ca?/?potassium (K) ratio 5.6, and Mg/K ratio 3.0.     

Lime and Cattle Manure in Soil Fertility and Soybean Grain Yield Cultivated in Tropical Soil

Most tropical soils have high acidity and low natural fertility. The appropriate application of lime and cattle manure corrects acidity, improves physical and biological properties, increases soil fertility, and reduces the use of chemical and/or synthetic fertilizers by crops, such as soybean, the main agricultural export product of Brazil. This study aimed to assess the effects of the combination of the application of dolomite limestone (0, 5, and 10 Mg ha^?1) and cattle manure (0, 40, and 80 Mg ha^?1) on grain yield and the chemical properties of an Oxisol (Red Latosol) cultivated with soybean for two consecutive years. The maximum grain yield was obtained with the application of 10 Mg ha^?1 of lime and 80 Mg ha^?1 of cattle manure. Liming significantly increased pH index, the concentrations of calcium (Ca²⁺) and exchangeable magnesium (Mg²⁺), and cation exchange capacity (CEC) of soil and reduced potential acidity (H⁺ + Al³⁺), while the application of cattle manure increased pH level; the concentrations of potassium (K⁺), Ca²⁺, and exchangeable Mg²⁺; and CEC of the soil. During the 2 years of assessment, the greatest grain yields were obtained with saturation of K⁺, Ca²⁺, and Mg²⁺ in CEC at the 4.4, 40.4, and 17.5 levels, respectively. The results indicated that the ratios of soil exchangeable Ca/Mg, Ca/K, K/Mg, and K/(Ca+Mg) can be modified to increase the yield of soybean grains.     

Drought Tolerance and Ion Accumulation of Rice Following Application of Additional Potassium Fertilizer

Five levels of water stress cycle (control flooded, control saturated, 5, 10, and 15 days of irrigation interval) and three potassium fertilization levels [80 kg, 120 kg, and kg 160 dipotassium oxide (K₂O) ha^?1] were exposed to investigate the influence of potassium fertilizer for minimizing water stress effect and maximizing productivity of rice. Different phyto-physiological parameters as well as uptake of major nutrient elements [nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), iron (Fe)] were examined. It was observed that rice yield, harvest index, and other physiological parameters reduces with increasing duration of water stress while application of additional potassium fertilizer has progressive impact on those parameters. From our observation, 10 days of watering cycle with potassium fertilization at 120 kg K₂O ha^?1 produces highest grain yield and harvest index. Uptake of major nutrient elements was also enhanced by potassium fertilizer. Therefore, it can be stated that additional potassium fertilizer application could be useful to mitigate water stress effect in rice.     

IMPROVEMENT IN YIELD AND QUALITY OF KINNOW (CITRUS DELICIOSA X CITRUS NOBILIS) BY POTASSIUM FERTILIZATION

Citrus, especially Kinnow, fruit yield and quality in Pakistan is not competitive with other countries, which could be mainly attributed to a lack of good nutrient management for citrus orchards. Many of the soils under these orchards have been reported as deficient in potassium (K). Therefore, work was initiated for improving citrus fruit yield, size, and quality through K nutrition management. Experiments were conducted in four districts of Punjab including Faisalabad, Toba Tek Singh, Jhang, and Sargodha and four rates of potash, i.e., 0, 50, 75 and 100 kg dipotassium oxide (K₂O) ha^?1 were applied using sulfate of potash (SOP) along with recommended rates of phosphorus (P) and nitrogen (N). Soils of all the selected sites were clay loam or sandy clay loam and deficient in K. The leaf analysis also showed that all the selected orchards were deficient in K. Application of K increased the fruit yield and quality but K at100 kg K₂O ha^?1 was more effective in increasing the fruit weight and size, and peel thickness than other K rates in all the selected orchards. Juice volume and percentage significantly increased when K was applied at 75 kg K₂O ha^?1 at all sites. Nutrient uptake like K, P, and N enhanced with the increase in K application rate, however, the highest calcium (Ca)+ magnesium (Mg) was recorded at 50 kg K₂O ha^?1. The results indicated that all rates of K application improved the fruit yield and quality and reduced fruit dropping, however, 75 kg K₂O ha^?1 rate was more effective as juice volume and percentage, total soluble solid (TSS)/acid ratio and nutrient uptake showed significant improvement.     

The effect of potassium and humic acid applications on yield and nutrient contents of wheat (Triticum aestivum L. var. Delfii) with same soil properties

Abstract

This study was conducted in the farmer field between the years 2014 and 2015. In this study, 3 doses of potassium (K) (0, 10, and 20?kg da^?1) of K₂SO₄ (50% K₂O) fertilizer and 3 doses of humic acid (HA) (0, 20, and 40?kg da^?1) (85% HA) were used. Increase in the HA dose reflected significant effects on pH, salt, organic matter, phosphorus, magnesium, iron, and manganese contents of the experiment area at p?p?p?p?p?相似文献   

Influence of potassium and magnesium fertilizer application on the yield and nutrient accumulation of maize genotypes under field conditions

The use of maize (Zea mays L.) genotypes that are able to utilize nutrients efficiently is an important strategy in the management of plant nutritional status; it is of particular importance with regard to potassium (K) and magnesium (Mg), due to their high requirement and influence on plant growth. The influence of K and Mg fertilizers on certain growth parameters of maize genotypes TM.815 and KL.72.AA, including length, seed in ear, seed weight growth, and nutrient concentration, was determined under field conditions over two successive years. The aim of the experiment was to study the effect of different rates of K and Mg fertilizers on maize genotype plant growth parameters, grain yield, and nutrient accumulation under field conditions.

A split plot design with three replicates was used and each block contained three treatments of 0, 100, and 200 kg ha^?1 of K₂O and 0, 10, and 20 kg ha^?1 of Mg; K₂SO₄ was used to supply K, and MgSO₄ was used for Mg.

Plants that responded to the K fertilizer had an increase in height, yield, and the concentration of K in the leaves and seeds. The addition of K fertilizer increased the concentration of nitrogen (N), iron (Fe), zinc (Zn), manganese (Mn), and K in the plant leaves and increased seed K concentration. Mg fertilizer increased the concentration of N, Fe, copper, and Mn in the leaves; however, it exerted no significant influence on K concentration. The KL.72.AA maize genotype had a higher mean plant height, number of seeds in ear, yield, and N, K, Fe, and Zn concentrations compared to the TM.815 maize genotype. In the experiment, the K fertilizer exerted a statistically significant effect on the leaf and seed K concentration; however, on a statistical basis, the Mg fertilizer did not affect the Mg concentration.     

Yield,Nutrient Uptake,and Changes in Soil Chemical Properties as Influenced by Liming and Iron Application in Common Bean in a No-Tillage System

Soil acidity is the principal limiting factor in crop production in Oxisols, and deficiency of micronutrients has increased in recent years because of intensive cropping. A field experiment was conducted over three consecutive years to assess response of common bean (Phaseolus vulgaris L.) to lime and iron (Fe) applications on an Oxisol in a no-tillage system. Changes in selected soil chemical properties in the soil profile (0- to 10- and 10- to 20-cm depths) with liming were also determined. Lime rates used were 0, 12, and 24 Mg ha^–1, and Fe application rates were 0, 50, 100, 150 200, and 400 kg ha^–1. Both lime and Fe were applied as broadcast and incorporated in the soil. Grain yields of common bean were significantly increased with the application of lime. Iron application, however, did not influence bean yield. There were significant changes in soil profile (0- to 10-cm and 10- to 20-cm depths) in pH, calcium (Ca²⁺), magnesium (Mg²⁺), hydrogen + aluminum (H⁺ + Al³⁺), base saturation, acidity saturation, cation exchange capacity (CEC), Ca²⁺ saturation, Mg²⁺ saturation, potassium (K⁺) saturation, and ratios of Ca/Mg, Ca/K, and Mg/K. These soil chemical properties had significant positive association with common bean grain yield. Averaged across two depths and three crops, common bean produced maximum grain yield at pH_w 6.3, Ca²⁺ 3.8 cmol_c kg^–1, Mg²⁺ 1.1 cmol_c kg^–1, 3.5 H⁺ + Al³⁺ cmol_c kg^–1, acidity saturation 41.8%, CEC 7.5 cmol_c kg^–1, base saturation 57.4%, Ca saturation 45.2%, Mg saturation 14.2%, K saturation 9.1%, Ca/Mg ratio 3.1, Ca/K ratio 22.6, and Mg/K ratio 6.7.     

EFFICACY OF GYPSUM AND MAGNESIUM SULFATE AS SOURCES OF SULFUR TO RAPESEED IN LATERITIC SOILS

A field experiment conducted on rapeseed (Brassica juncea L.) during 2005–2006 in a typical lateritic soil (Alfisol) of West Bengal, India revealed that sources of sulfur viz. gypsum and magnesium sulfate and levels of sulfur (0, 20, 40, 60 kg S ha^?1) have significant influence on grain yield, total biological yield, sulfur concentration in grain and stover, total sulfur uptake, oil content and oil yield and chlorophyll content. The maximum grain yield (18.28 q ha^?1) and oil yield (8.59 q ha^?1) was obtained with magnesium sulfate followed by gypsum yielded the grain yield of 17.99 q ha^?1 and oil yield of 8.22 q ha^?1 at 40 kg S ha^?1. Overall, the best performance was recorded when sulfur was applied at 40 kg S ha^?1 either as magnesium sulfate or gypsum. Results revealed that magnesium sulfate may be considered as the better source of sulfur than gypsum to raise the mustard crop in sulfur deficient acidic red and lateritic soils of West Bengal and if farmers apply either magnesium sulfate or gypsum to soils, the possible deficiency of sulfur and magnesium/calcium in soils and plants can be avoided.     

Response of tomato to polyhalite as a multi-nutrient fertilizer in southeast Brazil

Abstract

Limited information on the agronomic performance of polyhalite (K₂SO₄.MgSO₄.2CaSO₄.2H₂O) motivated us to establish two field trials in Sao Paulo, Brazil. The objective was to evaluate the comparative responses of tomato to muriate of potash (MOP), sulfate of potash, potassium magnesium sulfate, and polyhalite at different graded doses of potassium (K) application supplying varied amount of secondary nutrients. Under very low soil K conditions, polyhalite resulted in significantly higher marketable fruit yield, and higher foliar and fruit K and sulfur (S) concentrations than other K sources. This was not the case under medium soil K levels, that is, 101?mg?kg^?1. Likewise, polyhalite enhanced postharvest residual soil calcium (Ca), magnesium (Mg), and S than other evaluated sources. Depending on soil nutrient status and the cost of polyhalite, tomato farmers of Brazil could consider polyhalite as an option to meet crop K and secondary nutrient requirements.     

Yield,Nutrient Uptake,and Soil Chemical Properties as Influenced by Liming and Boron Application in Common Bean in a No‐Tillage System

Abstract

In Oxisols, acidity is the principal limiting factor for crop production. In recent years, because of intensive cropping on these soils, deficiency of micronutrients is increasing. A field experiment was conducted on an Oxisol during three consecutive years to assess the response of common bean (Phaseolus vulgaris L.) under a no‐tillage system to varying rates of lime (0, 12, and 24 Mg ha^?1) and boron (0, 2, 4, 8, 12, 16, and 24 kg ha^?1) application. Both time and boron (B) were applied as broadcast and incorporated into the soil at the beginning of the study. Changes in selected soil chemical properties in the soil profile (0- to 10‐ and 10- to 20‐cm depths) with liming were also determined. During all three years, gain yields increased significantly with the application of lime. However, B application significantly increased common bean yield in only the first crop. Only lime application significantly affected the soil chemical properties [pH; calcium (Ca²⁺); magnesium (Mg²⁺); hydrogen (H⁺)+ aluminum (Al³⁺); base saturation; acidity saturation; cation exchange capacity (CEC); percent saturation of Ca²⁺, Mg²⁺, and potassium (K⁺); and ratios of exchangeable Ca/Mg, Ca/K, and Mg/K] at both soil depths (0–10 cm and 10–20 cm). A positive significant association was observed between grain yield and soil chemical properties. Averaged across two depths and three crops, common bean produced maximum grain yield at soil pH_w of 6.7, exchangeable (cmol_c kg^?1) of Ca²⁺ 4.9, Mg²⁺ 2.2, H⁺+Al³⁺ 2.6, acidity saturation of 27.6%, CEC of 4.1 cmol_c kg^?1, base saturation of 72%, Ca saturation of 53.2%, Mg saturation of 17.6%, K saturation of 2.7%, Ca/Mg ratio of 2.8, Ca/K ratio of 25.7, and Mg/K ratio of 8.6. Soil organic matter did not change significantly with addition of lime.     

The role of potassium and zinc in reducing salinity and alkalinity stress conditions in two wheat genotypes

Soil salinity may reduce potassium (K) uptake due to strong competition with sodium cations at the root surface. In calcareous soils, zinc (Zn) precipitates in forms unavailable to plants. This study evaluated the responses of two wheat genotypes (C), Baccrosroshan and salinity-tolerant Line No. 4, to K and Zn fertilizers in both greenhouse and farm experiments with similar soil and water conditions. A factorial experiment with four K levels (K0 = 0, K1 = 72, K2 = 144 and K3 = 216 kg K₂O ha^?1) and three Zn levels (Zn0 = 0, Zn1 = 20 and Zn2 = 40 kg ha^?1) based on a randomized complete block design was employed. Analysis of variance results showed significant Zn × K × C interactions on all measured traits. Despite sufficient available potassium and illite clay in the root-growing medium, plants responded to K application. Yield components, grain yield and protein content of the two genotypes increased linearly as Zn × K increased. Considering Zn2K2 and Zn2K3, Line No. 4 produced 17% higher 1000-grain weight, 30% higher weight of grains per ear and 23% higher grain yield than Baccrosroshan in the farm experiment, and 10, 50, 16% higher values, respectively, in the greenhouse experiment. Results showed a significant relationship between grain weight per ear and grain yield. The achieved results highlight the importance of K and Zn nutrition under salt-stress conditions.     

Effect of Potassium Supplies on the Nutritional Status of Maize (Zea mays L.)

The effect of soil potassium (K) supplies on the yield and nutritional status of maize and on interactions between the nutrients was examined in a long-term mineral fertilization experiment on maize. The experiment was set up in 1989 in Hungarian Great Plain, Szarvas on chernozem meadow soil calcareous in the deeper layers, with four levels each of nitrogen (N), phosphorus (P) and potassium (K) supplies. The present paper describes the results of K fertilization in the 7–19th years of the experiment, from 1996 to 2008. The ammonium (NH₄)-lactate (AL) potassium oxide (K₂O) content of the ploughed layer ranged from 200 to 550 mg kg^–1 depending on the K fertilization level. No significant yield surpluses were recorded in any of the 13 years in response to the better K supplies ensured by K fertilizer. The results of leaf analysis indicated that the K concentrations representing satisfactory K supplies at a grain yield level of 10–14 t ha^–1 were 2.3–4.3% at the 5–6-leaf stage and 1.5–2.6% at the beginning of tasselling. When the AL-K₂O content of the soil was above 200–320 mg kg^–1, K– calcium (Ca), K–magnesium (Mg) and K–copper (Cu) antagonism was observed in the nutrient concentrations of the maize leaves in most years. The limit values of satisfactory nutrient supplies for maize in the 5–6-leaf stage and at the beginning of tasselling were 0.25–0.60% for Ca, 0.15–0.40% for Mg, and 7–11 mg kg^–1 and 2–11 mg kg^–1, respectively, for Cu. In dry years the iron (Fe) and zinc (Zn) concentrations of maize leaves declined at higher soil K supply levels.     

Liming and Copper Fertilization in Dry Bean Production on an Oxisol in No-tillage System

ABSTRACT

A field study was conducted with the objective of determining response of dry bean (Phaseolus vulgaris L.) to liming and copper (Cu) fertilization applied to an Oxisol. The lime rates used were 0, 12, and 24 Mg ha^?1 and Cu rates were 0, 2.5, 5, 10, 20, and 40 kg Cu ha^?1. Liming significantly increased common bean grain yield. Liming also significantly influenced soil chemical properties in the top (0–10 cm) as well as in the sub (10–20 cm) soil layer in favor of higher bean yield. Application of Cu did not influence yield of bean significantly. Average soil chemical properties across two soil layers (0–10 and 10–20 cm) for maximum bean yield were pH 6.4, calcium (Ca), 4.2 cmol_c kg^?1, magnesium (Mg) 1.0 cmol_c kg^?1, H+Al 3.2 cmol_c kg^?1, acidity saturation 40.4%, cation exchange capacity (CEC) 8.9 cmol_c kg^?1, base saturation 63.1%, Ca saturation 45.7%, Mg saturation 18.0%, and Potassium (K) saturation 2.9.     

POTATO TUBER YIELD AND QUALITY AS AFFECTED BY RATES AND SOURCES OF POTASSIUM FERTILIZER

Among the major nutrients, potassium (K) not only improves yields but also improves quality parameters. Field experiments were conducted to assess the comparative effect of sources and rates of K fertilizer on potato yield and quality on a sandy loam soil. Graded doses of potassium, i.e., 0, 150 and 225 kg ha^?1 K₂O from sulfate and muriate of potash were applied in triplicate. Recommended dose of nitrogen (N) and phosphorus (P) applied uniformly. Significant increase in tuber yield was observed with 150 kg ha^?1 K₂O from both the sources over control. Increase in tuber yield with 225 kg ha^?1 K₂O was statistically non significant compared to 150 kg ha^?1. The dry matter and specific gravity were more affected with sulfate of potash (SOP) than muriate of potash (MOP). The quality parameters like dry matter, specific gravity, starch contents, vitamin C, chips color and taste were improved with K application.     

Polyhalite as a sulfur source for fresh market tomato production in Brazil

Abstract

Polyhalite (PH), a naturally occurring multinutrient fertilizer containing potassium (K), calcium (Ca), magnesium (Mg), and sulfur (S), has improved tomato (Solanum lycopersicum L.) production in Brazil but a specific response by tomato to the S in PH is not confirmed. We compared four S sources – PH, sulfate of potash (SOP), sulfate of potash magnesia (SOPM), and single super phosphate (SSP) – applied at a target application rate of 40?kg?S?ha^?1 to fertilizers with no S (muriate of potash, MOP), and no K or S at commercial application rates in three commercial fields in Brazil with nitrogen (N), phosphorus (P), and K applied at recommended rates of 355, 500, and 200–300?kg?ha^?1, respectively. Consistent across locations, PH increased total yields over the control, MOP, and SSP, with SOP and SOPM higher than the control but not MOP or SSP. Only PH increased marketable yields compared to the control. Yields increased linearly with fruit numbers per plant which were higher for PH than the control or MOP, indicating higher fruit set in PH contributed to yield differences. While fertilizers increased leaf K and S concentrations and soil test K and SO₄–S, yield differences did not appear to be related solely to either K or S fertilization, nor to Mg fertilizers to which there was no response. Leaf and fruit Ca concentrations were higher in PH than the control and MOP at some locations suggesting Ca improved fruit set in PH. Results suggest tomato likely responded to the multinutrient content or solubility pattern of PH.     

Influence of Lime and Gypsum on Growth and Yield of Upland Rice and Changes in Soil Chemical Properties

Upland rice is an important crop in the cropping systems of South America, including Brazil. Two greenhouse experiments were conducted to determine influence of lime and gypsum on yield and yield components of upland rice and changes in the chemical properties of an Oxisol. The lime rates used were 0, 0.71, 1.42, 2.14, 2.85, and 4.28 g kg^?1 soil. The gypsum rates were 0, 0.28, 0.57, 1.14, 1.71, and 2.28 g kg^?1. Lime as well as gypsum significantly increased plant height, straw and grain yield, and panicle density in a quadratic fashion. Adequate lime and gypsum rates for maximum grain yield were 1.11 g kg^?1 and 1.13 g kg^?1, respectively. Plant height, straw yield, and panicle density were positively related to grain yield. Lime as well as gypsum application significantly changed extractable calcium (Ca), magnesium (Mg), hydrogen (H)+aluminum (Al), base saturation, and effective cation exchange capacity. In addition, liming also significantly increased pH, extractable phosphorus (P) and potassium (K), calcium saturation, magnesium saturation, and potassium saturation. Optimum acidity indices for the grain yield of upland rice were pH 6.0, Ca 1.7 cmol_c kg^?1, base saturation 60%, and calcium saturation 47%. In addition, upland rice can tolerate 42% of acidity saturation.     

Effects of Organic and Inorganic Fertilizers on Soil and Plant Nutrients and Yields of Pearl Millet and Wheat under Semi-arid Inceptisols in India

A study was conducted to assess fertilizer effect on pearl millet–wheat yield and plant-soil nutrients with the following treatments: T₁, control; T₂, 100% nitrogen (N); T₃, 100% nitrogen and phosphorus (NP); T₄, 100% nitrogen, phosphorus and potassium (NPK); T₅, 100% NPK + zinc sulfate (ZnSO₄) at 25 kg ha^?1; T₆, 100% NPK + farmyard manure (FYM) at 10 t ha^?1; T₇, 100% NPK+ verimcompost (VC) at 2.5 tha^?1; T₈, 100% NPK + sulfur (S) at 25 kg ha^?1; T₉, FYM at 10 t ha^?1; T₁₀, VC at 2.5 t ha^?1; T₁₁, 100% NPK + FYM at 10 t ha^?1 + 25 kg S ha^?1 + ZnSO₄ at 25 kg ha^?1; and T₁₂, 150% NPK treatments. Treatments differed significantly in influencing soil-plant nutrients and grain and straw yields of both crops. Grain yield had significant correlation with soil-plant N, P, K, S, and zinc (Zn) nutrients. The study indicated superiority of T₁₁ for attaining maximum pearl millet grain yield (2885 kg ha^?1) and straw yield (7185 kg ha^?1); amounts of N (48.9 kg ha^?1), P (8.8 kg ha^?1), K (26.3 kg ha^?1), S (20.6 kg ha^?1), and Zn (0.09 kg ha^?1) taken up; and amounts of soil N (187.7 kg ha^?1), P (13.7 kg ha^?1), K (242.5 kg ha^?1), S (10.1 kg ha^?1), and Zn (0.70 kg ha^?1). It was superior for wheat with grain yield (5215 kg ha^?1) and straw yield (7220 kg ha^?1); amounts of N (120.7 kg ha^?1), P (13.8 kg ha^?1), K (30 kg ha^?1), S (14.6 kg ha^?1), and Zn (0.18 kg ha^?1) taken up; and maintaining soil N (185.7 kg ha^?1), P (14.5 kg ha^?1), K (250.5 kg ha^?1), S (10.6 kg ha^?1), and Zn (0.73 kg ha^?1). Based on the study, 100% NPK + FYM at 10 tha^?1 + Zn at 25 kg ha^?1 + S at 25 kg ha^?1 could be recommended for attaining maximum returns of pearl millet–wheat under semi-arid Inceptisols.     

Optimum Soil Acidity Indices for Dry Bean Production on an Oxisol in No‐Tillage System

Abstract

Soil acidity is one of the major yield constraints to crop production in various parts of the world. Quantifying optimum soil acidity indices is an important strategy for achieving maximum economic crop yields on acid soils. Five field experiments were conducted for three consecutive years using dry bean as a test crop on an Oxisol. The lime rates used were 0, 12, and 24 Mg ha^?1 for creating a wide range of soil acidity indices in a no‐tillage cropping system. Grain yield of dry bean was significantly increased by improving soil pH, base saturation, calcium (Ca), magnesium (Mg), and potassium (K) saturation and reducing aluminum (Al) saturation. These soil acidity indices were higher in the 0‐ to 10‐cm soil layer than the 10‐ to 20‐cm soil layer for maximum grain yield. Across two soil depths, optimum values for maximum bean yield were pH 6.5, base saturation 67%, Ca saturation 48%, and Mg saturation 19%. Bean yield linearly increased with increasing K saturation in the range of 1.5 to 3% across two soil depths. There was a significant linear decrease in grain yield with increasing Al saturation in the range of 0 to 8% across two soil depths. Optimal values of soil indices for maximum bean yield can be used as a reference for liming and improving yield of bean crop on Oxisols in a no‐tillage cropping system. Yield components, such as pod number, grain per pod, and 100‐grain weight were significantly improved with liming, and bean yield was significantly associated with these yield components.     

EFFECTS OF ORGANIC AMENDMENTS APPLICATION ON GRAIN YIELD,LEAF CHLOROPHYLL CONTENT AND SOME MORPHOLOGICAL CHARACTERISTICS IN SOYBEAN CULTIVARS

A field experiment was conducted to evaluate the effect of organic amendments on grain yield, leaf chlorophyll content, and some morphological characteristics of three soybean cultivars in Mazandaran province located at north of Iran in 2006. Chemical fertilizer (75 kg ha^?1 potassium sulfate and triple superphosphate), two levels of municipal solid waste, vermicompost and sewage sludge biosolid (20 and 40 Mg ha^?1) enriched with%50 chemical fertilizers needed by soil were applied to soybean cultivars (‘032’ and ‘033’ promising lines and ‘JK’ cultivar). The experiment was carried out in split plot based on randomized complete block design with three replications. Some important plant characters such as grain yield, leaf chlorophyll content, number of branches, number of nodes on the main stem, length of internodes, stem diameter, first pod height and plant height were determined. Results showed that application of 40 Mg ha^?1 sewage sludge enriched with chemical fertilizers increased plant grain yield and stem diameter and application of 40 Mg ha^?1 vermicompost enriched with half chemical fertilizer increased the number of nodes on the main stem, significantly. The maximum length of internodes, first pod height and plant height were obtained when the 40 Mg ha^?1 sewage sludge and vermicompost enriched with half chemical fertilizer in ‘032’ line was used. Biomass, number of branches, stem diameter, number of nodes on the main stem of soybean cultivars had a positive and significant correlation with grain yield.