Effects of Inorganic Phosphates on the Thermodynamic,Pasting, and Asian Noodle‐Making Properties of Whole Wheat Flour

The effects of four inorganic phosphates on the thermodynamic and pasting properties of whole wheat flour as well as color, cooking quality, textural properties, and structural characteristics of whole wheat noodles were studied. The addition of phosphates increased the gelatinization temperature and enthalpy of melting of starch in whole wheat flour. Rapid visco analysis showed that all phosphates significantly increased whole wheat flour peak viscosity and final viscosity. Moreover, the whole wheat noodles prepared with disodium phosphate, trisodium phosphate, and sodium tripolyphosphate (STPP) exhibited brighter appearance, and the use of STPP and sodium hexametaphosphate reduced the cooking loss of whole wheat noodles. Texture profile analysis of cooked noodles revealed that the addition of phosphates significantly decreased the hardness and slightly increased the springiness, cohesiveness, and resilience. The microstructure of whole wheat noodles showed a larger degree of connectivity of the protein network and coverage of starch granules in the presence of inorganic phosphates. The results suggested that inorganic phosphates exhibited substantial effects on improving the quality of whole wheat noodles. Of the four phosphates studied, STPP appeared to be the most effective one in improving the overall properties of whole wheat noodles when they were normalized to constant phosphate content.     

Suitability of Ontario‐Grown Hard and Soft Wheat Flour Blends for Noodle Making

This study evaluated the blending of flours made from an Ontario hard red winter wheat (HWF) and an Ontario soft red winter wheat (SWF) and compared it with a commercial standard noodle flour (control) made from Canadian Western Hard Red Spring wheat to assess the impact on white salted noodle‐making performance and texture of cooked noodles. Flour characteristics, gluten aggregation, and starch pasting properties were assessed with a farinograph, GlutoPeak tester, and Rapid Visco Analyzer, respectively. The machinability of dough was evaluated with an SMS/Kieffer rig attached to a TA.XT Plus texture analyzer. Tensile and bite tests of cooked noodles were also conducted. Blending HWF with standard noodle flour decreased gluten strength and dough extensibility linearly proportional to the blend ratio, whereas a curvilinear response from blending SWF with standard noodle flour was observed. HWF demonstrated more favorable pasting properties except for lower peak viscosity for noodle making than standard noodle flour. Below a 20% blend ratio with HWF, no significant changes were seen on dough extensibility, cooking loss, tensile properties, and bite testing parameters of cooked noodles. It can be concluded that blending HWF up to a 20% level caused no significant change in the processing properties of dough and cooked noodle quality. The results also showed that the GlutoPeak tester is a sensitive tool for evaluating gluten strength in wheat flour.     

Quantitative and Qualitative Role of Added Gluten on White Salted Noodles

A commercial gluten and glutens isolated from four soft and four hard wheat flours were incorporated into a hard and a soft white flour by replacement to directly determine the quantitative and qualitative role of gluten proteins in making noodles. Gluten incorporation (6%) decreased water absorption of noodle dough by 3%, shortened the length of the dough sheet by 15 and 18%, and increased the thickness of the dough sheet by 18 and 20% in soft and hard wheat flour, respectively. Noodles imbibed less water and imbibed water more slowly during cooking with gluten incorporation, which resulted in a 3‐min increase in cooking time for both soft and hard wheat noodles. Despite the extended cooking time of 3 min, noodles incorporated with 6% gluten exhibited decreases in cooking loss by 15% in soft wheat. In hard wheat flour, cooking loss of noodles was lowest with 2% incorporation of gluten. Tensile strength of fresh and cooked noodles, as well as hardness of cooked noodles, increased linearly with increase in gluten incorporation, regardless of cooking time and storage time after cooking. While hardness of cooked noodles either increased or showed no changes during storage for 4 hr, tensile strength of noodles decreased. There were large variations in hardness and tensile strength of cooked noodles incorporated with glutens isolated from eight different flours. Noodles incorporated with soft wheat glutens exhibited greater hardness and tensile strength than noodles with hard wheat glutens. Tensile strength of cooked noodles incorporated with eight different glutens negatively correlated with SDS sedimentation volume of wheat flours from which the glutens were isolated.     

Impact of Characteristics of Different Wheat Flours on the Quality of Frozen Cooked Noodles

In this study, the impact of characteristics (physicochemical, rheological, and pasting properties) of different wheat flours on the quality of frozen cooked noodles was investigated. In this sample set, results showed the cooking loss of noodles related negatively to flour swelling power. The water absorption of noodles related negatively to the dough stability time, the area, and the resistance to extension. The wheat flour with higher dough development time resulted in frozen cooked noodles with higher hardness, chewiness, and adhesiveness. Springiness of noodles correlated negatively to degree of softening. The tensile properties of frozen cooked noodles were influenced by rheological and pasting properties of wheat flours. The present study indicated high quality of frozen cooked noodles demanded wheat flours with high dough gluten strength, peak viscosity, and final viscosity and with low pasting temperature.     

Cooking,Roasting, and Fermentation of Chickpeas,Lentils, Peas,and Soybeans for Fortification of Leavened Bread

The effects of cooking, roasting, and fermentation on the composition and protein properties of grain legumes and the characteristics of dough and bread incorporated with legume flours were determined to identify an appropriate pretreatment. Oligosaccharide content of legumes was reduced by 76.2–96.9% by fermentation, 44.0–64.0% by roasting, and 28.4–70.1% by cooking. Cooking and roasting decreased protein solubility but improved in vitro protein digestibility. Mixograph absorption of wheat and legume flour blends increased from 50–52% for raw legumes to 68–76, 62–64, and 74–80% for cooked, roasted, and fermented ones, respectively. Bread dough with cooked or roasted legume flour was less sticky than that with raw or fermented legume flour. Loaf volume of bread baked from wheat and raw or roasted legume flour blends with or without gluten addition was consistently highest for chickpeas, less for peas and lentils, and lowest for soybeans. Roasted legume flour exhibited more appealing aroma and greater loaf volume of bread than cooked legume flour, and it appears to be the most appropriate preprocessing method for incorporation into bread.     

The Impact of Oat Quality on White Salted Noodles Containing Oat Flour

This research compared the physicochemical properties of six milling oat cultivars from Western Australia over two growing seasons (2011 and 2012). Variations among the cultivars in physicochemical properties, particularly β‐glucan content, were assessed to determine their suitability for incorporation into white salted noodles at a level of 30% of the flour component. The average across six oat cultivars grown in 2012 was significantly higher (P < 0.05) for protein content, lipid content, and volume of smaller sized particles (<100 µm) and significantly lower for ash content, starch damage, and volume of larger particles (>100 µm) in comparison with the average across the same oat cultivars grown in 2011. The year of cultivation by cultivar interaction was significant (P < 0.05) for ash content, protein content, β‐glucan content, starch damage, and particle size. Oat cultivar Mitika had the highest peak viscosity for 100% oat flour (whole groat) and 30% oat–wheat (OW) flour blend, which may be owing to lower amylose percentage, high protein content, and greater volume of smaller particles. The effect of growing season had greater impact on OW noodle firmness than the genetic effect of cultivars. The eating and cooking quality attributes of OW noodles, such as color, color stability, firmness, and cooking solid loss were superior for those incorporated with 2012 oat flour (whole groat) compared with 2011 oat flour. Among the six oat cultivars, Williams produced noodles with poor cooking and eating quality, and Mitika was easier to handle during processing and produced noodles with superior brightness and color stability in comparison with other oat cultivars evaluated.     

豌豆粉添加对米粉品质特性的影响

为了提高米粉的营养价值,本研究将不同粒径的豌豆粉添加到米粉中,分析不同粒径及添加量(0%、7.5%、15%、30%)对大米粉粉质特性及米粉蒸煮、质构和感官特性的影响。结果表明,添加豌豆粉可以增加米粉中蛋白质的含量,添加30%豌豆粉后米粉的蛋白质含量为原米粉的1.73倍。豌豆粉的添加降低了米粉的峰值黏度、最终黏度和回生值,提高了米粉冷糊稳定性,使米粉不易老化。随着豌豆粉添加量的增加,米粉的硬度与蒸煮损失逐渐增大,感官品质降低。豌豆粉的粒度对米粉品质影响较大,当豌豆粉添加量相同时,添加200目豌豆粉的米粉蒸煮损失比添加80目豌豆粉降低9.08%~20.73%;感官评价总分提高1.35%~10.43%。综上,通过降低豌豆粉的粒度可以制备出豌豆粉添加量为30%的品质较好的米粉。本研究结果为营养健康型米粉的开发提供了一定的理论基础。     

不同品种小麦粉的粉质特性对速冻熟制面条品质的影响

为研究不同品种小麦粉与速冻熟制面条质构特性之间的关系,选取30种小麦制粉,用FOSS定氮仪、快速黏度仪、粉质仪和拉伸仪等测定面粉品质指标,制作速冻熟制面条,用质构仪测定质构特性。采用描述性统计、主成分和聚类分析方法对30种小麦面粉和速冻熟制面条的质构关系进行了分析。结果表明:不同品种小麦粉的湿面筋、糊化温度、弱化度、粉质质量指数与硬度呈极显著相关(P0.01);蛋白质、湿面筋、总淀粉含量、最终黏度、回生值、糊化温度、粉质吸水率、粉质曲线稳定时间、面团形成时间、弱化度、粉质质量指数、拉伸曲线面积、拉伸阻力、最大拉伸阻力与剪切力呈极显著相关(P0.01);小麦粉的粉质特性,除衰减值、峰值时间和延伸度外,均与拉伸力呈极显著相关(P0.01)。根据方差贡献率提取出可以反映原变量84.023%信息的5个因子,因子1主要反映面粉的粉质拉伸特性,因子2反映小麦粉糊化特性,因子3反映蛋白质特性,因子4和因子5共同反映小麦粉的淀粉特性。这些性状在小麦粉的评价方面起着重要作用,在加工中要注重对它们的选择。聚类分析将30种小麦粉分为4类,结果表明,不能仅凭小麦粉的指标数据和质构数据来选择制作速冻熟制面条的原料,还需考虑到感官评价的影响。该结论可为小麦粉在速冻熟制面条加工应用方面提供一定的理论参考。     

Two Metal Ions Improve Brightness in Wheat-Dough Products and Affect Aqueous Dispersion of Gluten

Zinc and aluminum ions at 0.05% of wheat flour, dry basis (7.4 and 18.5 mmol/100 g, respectively), improved the brightness of raw and dried spaghetti and salt and alkaline noodles. They also retarded bacteria and yeast and mold growth in salt noodles held at 25°C for two days as determined by total plate counts. Neither metal ion caused a change in noodle cooking quality, but they imparted a slight aftertaste in cooked noodles. Wheat flour dough mixed with 0.05% zinc or 0.025% aluminum ion (fwb), when kneaded in aqueous 0.1% calcium chloride, gave gluten with increased brightness. Zinc and aluminum ions appear to complex with enzymic browning chromophores in wheat dough and gluten and change their spectral properties. Zinc and aluminum ions affected the dispersion of gluten in water at pH ~5.0 and facilitated its spray-drying, but they were not detrimental to baking quality. Citric and tartaric acids at 5 mmol/100 g of gluten (db) gave wet gluten with pH ~4.5, which improved its brightness and water dispersibility.     

Relationship Between Physicochemical Properties of Wheat Flour,Wheat Protein Composition,and Textural Properties of Cooked Chinese White Salted Noodles

Physicochemical properties and protein composition of 39 selected wheat flour samples were evaluated and correlated with the textural properties of Chinese hard‐bite white salted noodles. Flour samples were analyzed for their protein and wet gluten contents, sedimentation volume, starch pasting properties, and dough mixing properties by farinograph and extensigraph. Molecular weight distribution of wheat flour proteins was determined with size‐exclusion (SE) HPLC, SDS‐PAGE, and acid‐PAGE. Textural properties of Chinese hard‐bite white salted noodles were determined through texture profile analysis (TPA). Hardness, springiness, gumminess, and chewiness of cooked noodles were found to be related to the dough mixing properties. Both protein content and protein composition were found to be related to TPA parameters of noodles. The amount of total flour protein was positively correlated to hardness, gumminess, and chewiness of noodles. The absolute amounts of different peak proteins obtained from SE‐HPLC data showed positive correlations with the hardness, gumminess, chewiness, and springiness of noodles. The proportions of these peak proteins were, however, not significantly related to texture parameters. The proportions of low‐molecular‐weight glutenins/gliadins and albumins/globulins, as observed from SDS‐PAGE, were correlated positively and negatively, respectively, to the hardness, gumminess, and chewiness of cooked noodles. Among the alcohol‐soluble proteins (from acid‐PAGE data), β‐gliadins showed strong correlations with the texture properties of cooked noodles. For the selected flour samples, the total protein content of flour had a stronger relationship with the noodle texture properties than did the relative proportion of different protein subgroups. Prediction equations were developed for TPA parameters of cooked noodles with SE‐HPLC and rapid visco analysis data of the 30 flour samples, and it was found that about 75% of the variability in noodle hardness, gumminess, and chewiness values could be explained by protein composition and flour pasting properties combined together. About 50% of the variations in cohesiveness and springiness were accounted for by these prediction equations.     

Effects of Oat Grain Hydrothermal Treatments on Wheat-Oat Flour Dough Properties and Breadbaking Quality

Hydrothermal treatments, which are routine in oat processing, have profound effects on oat flour dough rheological properties. The influence of roasting and steam treatments of oat grain on dough mixing and breadbaking properties was investigated when hydrothermally treated oat flour was blended with wheat flour. Roasting of oat grain (105°C, 2 hr) resulted in oat flours that were highly detrimental to wheat flour dough mixing properties and breadbaking quality. Steaming (105°C, 20 min) or a combination of roasting and steaming of oat grain significantly improved the breadbaking potential of the oat flours. The addition of oat flours increased water absorption and mixing requirements of the wheat flour dough and also decreased bread loaf volume. However, at the 10% substitution level, steamed oat flours exhibited only a gluten dilution effect on bread loaf volume when wheat starch was used as a reference. Oat flour in the breadbaking system decreased the retrogradation rate of bread crumb starch. The results indicate that adequate hydrothermal treatments of oat grain are necessary for oat flour breadbaking applications. Steamed oat flours used at a 10% level retarded bread staling without adversely affecting the loaf volume.     

Relationship Between Grain,Semolina, and Whole Wheat Flour Properties and the Physical and Cooking Qualities of Whole Wheat Spaghetti

Durum breeding programs need to identify raw material traits capable of predicting whole wheat spaghetti quality. Nineteen durum wheat (Triticum turgidum L. var. durum ) cultivars and 17 breeding lines were collected from 19 different environments in North Dakota and were evaluated for physical and cooking qualities of whole wheat spaghetti. Raw material traits evaluated included grain, semolina, and whole wheat flour characteristics. Similar to traditional spaghetti, grain protein content had a significant positive correlation with cooking quality of whole wheat spaghetti. Stepwise multiple regressions showed grain protein content, mixogram break time, and wet gluten were the predominant characteristics in predicting cooked firmness of whole wheat spaghetti.     

Effects of Particle Size and Starch Damage of Flour and Alkaline Reagent on Yellow Alkaline Noodle Characteristics

A hard white spring wheat was milled to yield three patent flours with different starch damage levels by manipulating reduction grinding conditions, and each flour was sieved to give three different particle sizes (85–110, 110–132, 132–183 μm). Raw alkaline noodles were prepared using either 1% w/w kansui (sodium and potassium carbonates in 9:1 ratio) or 1% w/w sodium hydroxide. Noodles prepared with sodium hydroxide were significantly brighter, less red, and more yellow than those made with kansui. Differences in noodle color among flour treatments were evident but were attributable to differences in flour refinement rather to than particle size or starch damage. Noodles were rested for 1 hr after processing before cooking. Alkaline reagent was the main factor associated with cooking loss, being ≈50% greater for sodium hydroxide noodles because of higher pH compared with kansui noodles. Cooked sodium hydroxide noodles were thicker than kansui noodles, and cooked strands for both noodle types became thicker as starch damage increased and as particle size became coarser. Instrumental assessment of cooked noodle texture showed that maximum cutting stress (MCS), resistance to compression (RTC), recovery (REC), stress relaxation time (SRT), chewiness (CHE), and springiness (SPR) were influenced by the type of alkaline reagent. Flour particle size and starch damage also influenced noodle texture but the magnitude of the effects and the trends were dependent on alkaline reagent. MCS of kansui noodles was much greater than for sodium hydroxide noodles. MCS of kansui noodles increased as starch damage increased but, in contrast, MCS of sodium hydroxide noodles decreased with increasing starch damage. REC of kansui noodles increased with increasing starch damage and decreased with larger particle size, whereas for sodium hydroxide noodles REC decreased with increasing starch damage and declined dramatically with larger particle size. Kansui noodles exhibited significantly shorter SRT than sodium hydroxide noodles. SRT of kansui noodles was only moderately affected by starch damage and particle size, whereas for sodium hydroxide noodles, SRT became much shorter as flour became coarser and starch damage became higher. CHE of kansui noodles was greater than for sodium hydroxide noodles. CHE of kansui noodles increased as starch damage increased. In contrast, CHE of sodium hydroxide noodles decreased as starch damage increased and also decreased as flour became coarser. SPR of both noodle types decreased as flour became coarser and starch damage became greater. On the basis of these experiments, flour of smaller particle size is an asset to the cooking quality of sodium hydroxide noodles, but high starch damage is to be avoided. For kansui noodles, the impact of flour particle size on cooked noodle texture was less evident and low starch damage, rather than high starch damage, was an asset.     

Refrigerated Storage of Yellow Alkaline Durum Noodles: Impact on Color and Texture

Durum wheat straight‐grade flour samples, representing the cultivars Commander and Strongfield, a composite cargo mixture of Canada Western Amber Durum cultivars and a Japanese commercial durum flour were used to make yellow alkaline noodles. A Canada Western Red Spring common wheat composite straight‐grade flour was included in the study for comparative purposes. Alkaline noodles were prepared using 1% w/w kansui reagent (sodium and potassium carbonates, 9:1) and stored for 1, 2, 3 and 7 days at 4°C to duplicate a normal convenience store operation. The raw noodle color of the durum alkaline noodles exhibited significantly better noodle brightness, L*, and yellowness, b*, as compared to noodles prepared from common wheat at all storage periods. The number of discolored specks in the durum flour based noodles was significantly lower as well as significantly lighter than those of common wheat at all time intervals. Noodles prepared from Commander, Strongfield, or the cargo composite flours displayed significantly lower water uptake during cooking than both the commercial durum flour and the common wheat noodles. The commercial durum flour noodles displayed the thinnest cooked noodles, while the common wheat flour noodles were the thickest. Evaluation of cooked noodle texture, immediately after production and subsequent storage of the raw noodles at 4°C for 1, 2 and 3 days before cooking showed a general increase in maximum cutting stress (MCS) with storage. Noodles prepared from Commander flour consistently display MCS values exceeding those of CWRS as well as the highest resistance to compression (RTC) and recovery (REC) measurements. The visual improvements in noodle brightness, enhanced yellowness, reduced speck numbers and darkness in combination with equivalent to improved cooked noodle texture attributes compared with common wheat flour suggests that durum flours are an ideal material for fresh, refrigerated yellow alkaline noodles.     

Effect of Amaranthus and Buckwheat Proteins on Wheat Dough Properties and Noodle Quality

Isoelectric protein concentrates (IPC) were prepared from one buckwheat (Fagopyrum esculentum) and five Amaranthus genotypes. Their effect on the mixing properties of a wheat flour was studied. Mixograph and dynamic oscillatory measurements showed significant increases in dough strength with the addition of 2 and 4% IPC, correlated to the water-insoluble fraction level of the IPC. The same IPCs were used at 2% level to supplement a wheat flour in making Chinese dry noodles. Measurable changes in both the raw and cooked noodle color were observed, and the change caused by addition of buckwheat IPC was substantial. Some of the IPCs caused an increase in cooking loss and only one caused an increase in weight, while increase in volume of the cooked noodles was not significantly affected. The changes in the rheological properties of cooked noodles due to addition of IPCs were measured. Overall, their effects were favorable, but the changes were statistically significant in only a few cases. The substantial dough-strengthening effect of the IPCs was hence not effectively translated into improved cooked noodle quality, and possible reasons for this are discussed.     

Impact of Proteins on Pasting and Cooking Properties of Nonparboiled and Parboiled Rice

The role of proteins in the pasting and cooking properties of non‐parboiled (npb) and parboiled (pb) rice was tested by means of a reducing agent dithiothreitol (DTT) and a protease (trypsin). DTT increased the swelling power and carbohydrate leaching of flour from npb rice flour but decreased its amylose leaching. Although DTT slightly increased the Rapid Visco Analyser (RVA) viscosity at the initial stages of the pasting process, it decreased RVA viscosity in the further phases of the experiment. Preincubation of flour with a trypsin decreased RVA viscosity along the whole temperature profile. Addition of DTT to the cooking water decreased water absorption and rice hardness and increased leaching of solids during cooking and stickiness of the cooked npb rice. Addition of DTT to the cooking water of flour from pb rice increased swelling power, carbohydrate leaching, and amylose leaching. Addition of DTT also increased RVA viscosity. Preincubation with trypsin had a similar effect but the changes were less pronounced. Addition of DTT increased stickiness of cooked pb rice and increased water absorption and leaching of solids during cooking. Taken together, the results provide evidence for the existence of a protein barrier affecting starch swelling, rheological, and cooking properties of both npb and pb rice.     

Physicochemical Changes in Nontraditional Pasta During Cooking

Physicochemical changes in the components of nontraditional spaghetti during cooking were reflected in the quality of the cooked product. Spaghetti formulations used were semolina (100%), whole wheat flour (100%), semolina/whole wheat flour (49:51), semolina/flaxseed flour (90:10), whole wheat flour/flaxseed flour (90:10), and semolina/whole wheat flour/flaxseed flour (39:51:10). Spaghetti quality was determined as cooking loss, cooked weight, and cooked firmness. Physicochemical analyses included total starch, starch damage, pasting properties, and protein quality and quantity of the flour mixes and spaghetti cooked for 0, 2, 4, 10, and 18 min. As cooking time progressed, total starch content decreased up to 5.7% units, starch damage increased up to 11.7% units, and both pasting parameters and protein solubility decreased significantly in all six formulations. Changes in the starch damage level, total starch content, and pasting properties of spaghetti correlated significantly (P < 0.05) with the cooking loss, cooked weight, and cooked firmness values recorded for the spaghetti. High levels of glutenin polymers and low levels of the albumin and globulin fractions were associated with low cooking losses and cooked weight and with high cooked firmness, indicating the involvement of these proteins in the cooked quality of nontraditional spaghetti.     

Effects of Vacuum Mixing,Water Addition,and Mixing Time on the Quality of Fresh Chinese White Noodles and the Optimization of the Mixing Process

In this study, the effects of mixing process parameters (degree of vacuum, water addition, and mixing time under vacuum) on the cooking and sensory quality properties of Chinese white noodles were investigated by using one commercial‐scale noodle production line and one typical commercial wheat flour. Noodle appearance, firmness, elasticity, smoothness, and total quality scores were significantly improved as the degree of vacuum increased from 0 to 0.06 MPa, although lower sensory scores and larger cooking losses occurred when noodles were mixed at 0.08 MPa. Noodles with a water addition of 35% had the highest total score and the highest scores for each sensory factor. As mixing time increased, the sensory score of cooked noodles increased initially and then decreased. With a mixing time of 7 min, the sensory score was the highest and cooking loss was the lowest. The results of response surface methodology indicated that fresh noodle quality was most affected by the water addition, followed by vacuum degree. Added water was a more important source of variation for appearance, firmness, stickiness, smoothness, total score, and cooking loss than degree of vacuum and mixing time, whereas degree of vacuum was the predominant source of variation for color and elasticity. The interactions between the factors had little effect on sensory and cooking properties. The optimal mixing conditions were determined to be as follows: degree of vacuum, 0.06 MPa; added water, 35.6%; and mixing time, 7.25 min. Furthermore, vacuum mixing produced a more even, coherent, and closed microstructure for the sheeted dough than nonvacuum mixing.     

Great Northern Bean Could Improve the Nutritional Value of Instant Noodles

Instant noodles were prepared by substituting hard red winter (HRW) wheat flour with Great Northern bean powder (GNBP) at selected levels (0–60%) using a pilot‐scale noodle processing machine. The functional properties, water absorption, water solubility, and pasting profiles of flour mixtures were tested to verify the process tolerances of ingredients. Prepared noodle samples were evaluated for color, cooking quality, texture, and sensory properties. Slight color differences, an increased cooking loss, and reduced chewiness, cohesiveness, and hardness were observed in cooked noodles that were prepared with GNBP up to 25% of HRW wheat flour weight. The results suggest that HRW wheat flour could be replaced up to 20% (w/w) with GNBP, while still using the conventional processing conditions, to improve the product nutritional value (i.e., increased protein and fiber contents and reduced fat content) (P < 0.05).     

Effect of Whole Grain Wheat Flour on the Mixing Properties,Oil Uptake,and In Vitro Starch Digestibility of Instant Fried Noodles

The effects of whole grain wheat (WGW) flour on the quality attributes of instant fried noodles were characterized in terms of mixing and oil‐resisting properties as well as in vitro starch digestibility. Higher water absorption and shorter kneading time were required to obtain the optimally mixed dough from WGW flour, and the presence of nonstarch components in the WGW flour lowered the thermal conductivity of the noodles. The use of WGW flour produced instant fried noodles with oil uptake reduced by 30%, which could be correlated with the less porous structure confirmed by the surface and cross‐sectional scanning electron microscope images. When the instant fried noodles were subjected to in vitro starch digestion, the use of WGW flour was effective in suppressing the hydrolysis of starch in the noodles, and the predicted glycemic index of the WGW noodles (80.6) was significantly lower than that of the white wheat noodles (83.3).