Suitability of tef varieties in mixed wheat flour bread matrices: A physico-chemical and nutritional approach

Wheat flour replacement from 0 to 40% by single tef flours from three Ethiopian varieties DZ-01-99 (brown grain tef), DZ-Cr-37 (white grain tef) and DZ-Cr-387 (Quncho, white grain tef) yielded a technologically viable ciabatta type composite bread with acceptable sensory properties and enhanced nutritional value, as compared to 100% refined wheat flour. Incorporation of tef flour from 30% to 40% imparted discreet negative effects in terms of decreased loaf volume and crumb resilience, and increase of crumb hardness in brown tef blended breads. Increment of crumb hardness on aging was in general much lower in tef blended breads compared to wheat bread counterparts, revealing slower firming kinetics, especially for brown tef blended breads. Blended breads with 40% white tef exhibited similar extent and variable rate of retrogradation kinetics along storage, while brown tef-blended breads retrograded slower but in higher extent than control wheat flour breads. Breads that contains 40% tef grain flour were found to contain five folds (DZ-01-99, DZ-Cr-387) to 10 folds (DZ-Cr-37) Fe, three folds Mn, twice Cu, Zn and Mg, and 1.5 times Ca, K, and P contents as compared to the contents found in 100% refined wheat grain flour breads. In addition, suitable dietary trends for lower rapidly digestible starch and starch digestion rate index were met from tef grain flour fortified breads.     

Study of the mechanism of improvement due to waxy wheat flour addition on the quality of frozen dough bread

Waxy wheat flour (WWF) was substituted for 10% regular wheat flour (RWF) in frozen doughs and the physicochemical properties of starch and protein isolated from the frozen doughs stored for different time intervals (0, 1, 2, 4 and 8 weeks) were determined to establish the underlying reasons leading to the effects observed in WWF addition on frozen dough quality. Using Nuclear Magnetic Resonance (NMR), Differential Scanning Calorimeter (DSC) and X-ray Diffraction (XRD) among others, the gluten content, water molecular state, glutenin macropolymer content, damaged starch content, starch swelling power, gelatinization properties, starch crystallinity and bread specific volume were measured. Compared to RWF dough at the same frozen storage condition, 10% WWF addition decreased dry gluten and glutenin macropolymer contents and T₂₃ proton density of frozen dough, but increased the wet gluten content, T₂₁ and T₂₂ proton density. 10% WWF addition also decreased damaged starch content, but increased starch swelling power, gelatinization temperature and enthalpy, crystallinity of starch and bread specific volume of frozen dough. Results in the present study showed that the improvement observed due to WWF addition in frozen dough bread quality might be attributed to its inhibition of redistribution of water molecules bound to proteins, increase in damaged starch content and decrease in starch swelling power.     

Impact of lipases with different substrate specificity in wheat flour separation on the properties of the resultant gluten

Wheat gluten was isolated in a laboratory dough-batter flour separation process in the presence or absence of lipases differing in hydrolysis specificity. The obtained gluten was blended with wheat starch to obtain gluten-starch (GS) blends of which the water and oil binding capacities were investigated. Furthermore, GS blends were mixed into dough and processed into model breads, of which dough extensibility and loaf volume were measured, respectively. In comparison to GS blends prepared with control gluten, oil binding capacity was higher when GS blends contained gluten isolated with Lecitase Ultra (at 5.0 mg enzyme protein/kg flour), a lipase hydrolyzing both non-polar and polar lipids. Additionally, dough extensibility and total work needed for fracture were lower for dough prepared from GS blends containing gluten isolated with Lipolase (at 5.0 mg enzyme protein/kg flour), a lipase selectively degrading non-polar lipids. In GS blend bread making, this resulted in inferior loaf volumes. Comparable GS blend properties were measured when using control gluten and gluten isolated with YieldMAX, a lipase mainly degrading N-acyl phosphatidylethanolamine. In conclusion, properties of GS blend model systems are altered when gluten prepared in the presence of lipases is used to a degree which depends on lipase specificity and concentration.     

Optimisation of rheological properties of gluten-free doughs with HPMC,psyllium and different levels of water

Hydrocolloids have traditionally been investigated as an alternative to gluten for making good quality products for coeliac patients. This study investigated the interactions between hydroxypropylmethylcellulose (HPMC) (2–4 g/100 g of flour), psyllium (0–4 g/100 g of flour) and water level (90–110 g/100 g of flour) in gluten-free breadmaking. Psyllium incorporation reduced the pasting temperature and compliance values, and increased elastic (G′) and viscous (G″) moduli values. In contrast, HPMC addition had no important effects on pasting properties and compliance values, but also increased G′ and G″ values. Psyllium inclusion reduced bread specific volume and increased bread hardness, while there were hardly differences in the bread specific volume and hardness between the percentages of HPMC studied. In addition, when the dough hydration level was increased, there was a decrease in the influence of hydrocolloids on dough rheology and specific volume and hardness of breads.     

Effect of wheat germ flour addition on wheat flour,dough and Chinese steamed bread properties

Wheat germ flour (WGF) has been developed as a functional food ingredient with high nutritional value. In this study, WGF was applied in steamed bread-making in order to improve the quality of Chinese steamed bread (CSB). Partial substitution of wheat flour with WGF at levels of 3%, 6%, 9% and 12% (w/w) was carried out to investigate physicochemical properties of blends and their steaming performance. Falling number (FN) values of composite flours ranged from 199 to 223 s. Viscosity analysis results showed that wheat flour mixed with WGF had higher pasting temperature and lower viscosities. Dough rheological properties were also investigated using farinograph and extensograph. The addition of WGF diluted the gluten protein in dough and formed weak and inextensible dough, which can be studied by scanning electron microscope (SEM) analysis. CSB made with WGF had significantly lower volume, specific volume and higher spread ratio. The sensory acceptability and physicochemical quality of CSB were improved with the application of a low level of WGF (3% and 6%). However, results showed that a high level of WGF over 9% is not recommended because of unsatisfactory taste. As a whole, addition of appropriate level of WGF in wheat flour could improve the quality of CSB.     

Whole wheat bread: Effect of bran fractions on dough and end-product quality

Consumption of whole-wheat based products is encouraged due to their important nutritional elements that benefit human health. However, the use of whole-wheat flour is limited because of the poor processing and end-product quality. Bran was postulated as the major problem in whole wheat breadmaking. In this study, four major bran components including lipids, extractable phenolics (EP), hydrolysable phenolics (HP), and fiber were evaluated for their specific functionality in flour, dough and bread baking. The experiment was done by reconstitution approach using the 2⁴ factorial experimental layout. Fiber was identified as a main component to have highly significant (P < 0.05) and negative influence on most breadmaking characteristics. Although HP had positive effect on farinograph stability, it was identified as another main factor that negatively impacted the oven spring and bread loaf volume. Bran oil and EP seemed to be detrimental to most breadmaking characteristics. Overall, statistical analysis indicates that influence of the four bran components are highly complex. The bran components demonstrate multi-way interactions in regards to their influence on dough and bread-making characteristics. Particularly, Fiber appeared to have a high degree of interaction with other bran components and notably influenced the functionality of those components in whole wheat bread-making.     

Effect of quinoa flour on gluten-free bread batter rheology and bread quality

A new gluten-free bread formulations composed of quinoa, buckwheat, rice flour and potato starch were developed in the present study. Rheological characteristics of the bread batter with increasing amount of quinoa were determined; storage (G′) and loss modulus (G″) values were also measured for investigation of viscoelastic properties. To evaluate the quality of breads; technological and physical (bake loss %, specific volume, texture, microstructure, color), chemical (protein, moisture, ash) and sensory properties were determined. All batter formulations independent of the quinoa amount exhibited pseudoplastic behavior, and G′ values were found to be higher than G″ values in expressing the solid like characteristics of the batter. Amount of quinoa flour addition did not present significant difference on bake loss%, specific volume and protein content (p>0.05); however, 25% quinoa flour bread displayed better results with its higher sensory scores and softer texture. Quinoa and buckwheat flour mixture therefore will be a good alternative for conventional gluten-free bread formulations.     

Comparison of the volatile profiles of the crumb of gluten-free breads by DHE-GC/MS

The aroma of gluten-free bread has been considered of lower quality than that of the common wheat bread. With the aim of improving the aroma of gluten-free bread, the volatile profiles of the crumb of gluten-free breads made from rice, teff, buckwheat, amaranth and quinoa flours as well as corn starch, respectively, were evaluated. Wheat bread was used as a reference and dynamic headspace extraction together with GC/MS was employed. It was found that the whole grain breads, made with teff, quinoa and amaranth flours, presented a stronger aroma with higher number of important aroma contributors. Rice bread was characterised by the highest levels in nonanal and 2,4-decadienal and corn starch bread by 2,3-pentanedione and 2-furaldehyde. Teff presented the highest abundance of ethyl hexanoate and ethyl nonanoate, but also of alcohols and aldehydes from lipid oxidation. Quinoa and amaranth were classified by the highest content in Strecker and Ehrlich aldehydes as well as 1-propanol, 2-methyl-1-propanol, 3-methyl-1-butanol or 3-hydroxy-2-butanone from fermentation. Corn starch bread was the closest to wheat bread in the PCA due to the highest content mainly in 2,3-butanedione and furfural as well as the lowest contents in 1-propanol, 1-hexanol and pentanal.     

Impact of different beer yeasts on wheat dough and bread quality parameters

In order to investigate the impact of different yeast strains from the species Saccharomyces cerevisiae on the dough and bread quality parameters, wheat flour was fermented using different beer yeasts. The results show that beer yeast strains could be included in the baking process since S. cerevisiae T-58 and S. cerevisiae s-23 provided adequate gas production and dough formation with superior structural properties like extensibility and stickiness to S. cerevisiae baker's yeast. The resulting breads show the highest specific volume with the highest slice area and the highest number of cells and the lowest hardness over time. The different yeasts had also an impact on the crust colour due to their abilities to ferment different sugars and on shelf life due to the production of a range of different metabolic by-products. According to this study it was possible to produce higher quality bread by using yeast coming from the brewing industry, instead of bread containing standard baker's yeast.     

Investigating the impact of α-amylase, α-glucosidase and glucoamylase action on yeast-mediated bread dough fermentation and bread sugar levels

Wheat flour is generally supplemented with α-amylases to increase maltose levels in bread dough and increase loaf volume. While the preference of yeast for glucose and fructose over maltose as substrate for fermentation is well documented, the impact of maltose versus glucose producing enzymes on bread dough fermentation kinetics and bread sugar levels is ill documented. Hence the impact of α-amylase, α-glucosidase and glucoamylase action on both aspects was investigated. Glucoamylase and α-amylase increase the total fermentable sugar content of dough, while α-glucosidase only affects the glucose/maltose ratio. Due to their effect on total fermentable sugar levels, addition of α-amylase or glucoamylase prolongs the total productive fermentation time, while this is not the case for α-glucosidase. In contrast to α-amylase, both glucoamylase and α-glucosidase supplementation leads to higher CO₂ production rates during the initial stages of fermentation. In the final bread product, different sugar levels are observed depending on the dosage and type of starch-degrading enzyme. The results of this study imply that long and short fermentation processes benefit from α-amylase and α-glucosidase addition, respectively, while glucoamylase supplementation is suitable for both long and short fermentation times.     

A new lean no time test baking method with improved discriminating power

In response to customer concerns related to gluten strength in commercial baking, the Canadian Grain Commission assessed whether the Canadian Short Process (CSP) test bake method was generating useful data related to intrinsic strength of wheat varieties. Assessment of CSP loaf volume data for Canadian variety trials spanning 2003 to 2013 showed very little correlation with dough strength parameters as measured by farinograph and extensigraph. A lean no time (LNT) test baking method was developed that can better discriminate genotypes and provide objective indicators of the effect of intrinsic dough strength on baking quality. From early method development, through method validation and verification using diverse sets of samples targeting different Canadian wheat classes and grown in three different crop years, results showed the LNT method to be more discriminating and easily adopted by other laboratories. In 2015, the LNT method was adopted as the method of choice in future Canadian variety registration trials. The LNT method is fast, simple and well-suited to high throughput test baking conditions encountered in the evaluation of large numbers of breeder lines. A new objective parameter, loaf top ratio, was also introduced and found to correlate well with dough strength and dough handling properties.     

A new lean no time test baking method with improved discriminating power

In response to customer concerns related to gluten strength in commercial baking, the Canadian Grain Commission assessed whether the Canadian Short Process (CSP) test bake method was generating useful data related to intrinsic strength of wheat varieties. Assessment of CSP loaf volume data for Canadian variety trials spanning 2003 to 2013 showed very little correlation with dough strength parameters as measured by farinograph and extensigraph. A lean no time (LNT) test baking method was developed that can better discriminate genotypes and provide objective indicators of the effect of intrinsic dough strength on baking quality. From early method development, through method validation and verification using diverse sets of samples targeting different Canadian wheat classes and grown in three different crop years, results showed the LNT method to be more discriminating and easily adopted by other laboratories. In 2015, the LNT method was adopted as the method of choice in future Canadian variety registration trials. The LNT method is fast, simple and well-suited to high throughput test baking conditions encountered in the evaluation of large numbers of breeder lines. A new objective parameter, loaf top ratio, was also introduced and found to correlate well with dough strength and dough handling properties.     

Hydration,polymerization and rheological properties of frozen gluten-water dough as influenced by thermostable ice structuring protein extract from Chinese privet (Ligustrum vulgare) leaves

The effects of thermostable ice structuring proteins (TSISPs) extracted from Chinese privet (Ligustrum vulgare) leaves on water molecular state, dehydration of gluten proteins, secondary structure of proteins, glutenin subunit of glutenin macropolymer (GMP) and rheological properties of gluten doughs during frozen storage were investigated by nuclear magnetic resonance (NMR), attenuated total reflectance-Fourier transform infrared reflectance (ATR-FTIR), reversed phase-high performance liquid chromatography (RP-HPLC) and dynamic rheometry. After frozen storage for 5 weeks, the control sample showed dehydration of gluten proteins and mobility of water molecules in gluten dough increased, significantly indicating ice formation and water redistribution. Secondary structure of gluten proteins changed significantly, α-helix decreased and β-sheet increased. Glutenin subunits depolymerized, indicated by the decrease in high molecular weight glutenins/low molecular weight-glutenins (HMW/LMW) ratio. The decrease in elastic moduli (G′) and viscous moduli (G′') showed the deterioration of rheological properties of gluten dough. The addition of TSISPs inhibited the dehydration of gluten proteins, decrease in α-helix, increase in β-sheet and HMW/LMW ratio, resulting in improved rheological properties of gluten dough.     

Wheat Bread Quality as Influenced by the Substitution of Waxy and Regular Barley Flours in Their Native and Extruded Forms

The substitution of wheat flour with barley flour (i.e. native or pretreated/extruded) reduced the loaf volume. Depending on the barley variety and flour pretreatments, the colour and firmness/texture of the bread loaves were altered. Amongst the barley breads prepared from native flours (at 15% barley flour substitution level), Phoenix had higher loaf volume and lower crumb firmness than Candle. However, amongst the barley breads prepared from extruded flours, CDC-Candle had higher loaf volume and lower crumb firmness than Phoenix. The lower loaf volume and firmer crumb texture of barley breads as compared with wheat bread may be attributed to gluten dilution. Also, the physicochemical properties of barley flour components, especially that of β-glucan, can affect bread volume and texture. β-glucan in barley flour, when added to wheat flour during bread making, could tightly bind to appreciable amounts of water in the dough, suppressing the availability of water for the development of the gluten network. An underdeveloped gluten network can lead to reduced loaf volume and increased bread firmness. Furthermore, in yeast leavened bread systems, in addition to CO₂, steam is an important leavening agent. Due to its high affinity for water, β-glucan could suppress the amount of steam generated, resulting in reduced loaf volume and greater firmness. In the present study, breads made with 15% HTHM CDC-Candle flour had highly acceptable properties (loaf volume, firmness and colour) and it indicated that the use of extruded barley flours would be an effective way to increase the dietary fibre content of barley breads.     

Influence of the cultivar,environment and management on the grain yield and bread-making quality in winter wheat

The genotype, environment and their interaction play an important role in the grain yielding and grain quality attributes. The main aim of this study was to determine the contributions of the genotype, environment and their interaction to the variation in bread-making traits. The data that were used for the analyses performed in this study were obtained from 3 locations in Poland from post-registration multi-environment trials with winter wheat in 2009 and 2010. The experimental factors were the cultivar (7 cultivars) and the crop management level (low input and high input). In the multi-environment trials, 17 traits were investigated that characterize grain, flour and dough quality. Most of the traits were affected much more strongly by environmental factors (i.e., year and location) than by genotype. The variance components revealed an especially strong effect of the year on the baking score, loaf volume and water absorption, as well a strong effect of the location on dough development and protein content. The obtained results demonstrate that the grain quality as measured by the parameters based on the protein content and quality may be substantially improved by crop management practices, especially by N fertilization level.     

Prediction of bread wheat baking quality using an optimized GlutoPeak®-Test method

The GlutoPeak^®-Test (GPT) as a rapid small-scale technique was optimized to evaluate the gluten aggregation properties and to predict the loaf volume, on the basis of a multiyear and multilocation analysis of wheat samples, using different solvents. 5 % lactic acid and 1 % sodium chloride displayed significant GPT responses. Relationships between protein content, sedimentation value, GPT parameters and loaf volume were investigated. With 1 % sodium chloride, the torque 15 s before maximum torque (AM) presented the highest correlation with loaf volume of samples from 2013 to 2014 (r = 0.77, r = 0.63, p < 0.001, respectively). A multiple regression analysis indicated that the best prediction of loaf volume was a linear function of protein content and AM, explaining the variation in loaf volume by 63 % and providing an uncertainty of ±39 ml. The accuracy of the validation of the linear function leads to 64 % correct and to 36 % incorrect predictions of the loaf volume. This emphasizes that the application of the linear function of protein content and AM cannot replace the actual measurement of loaf volume, but it could be a useful rapid screening test in breeding for improved baking quality in bread wheat.     

In vitro starch digestibility and predicted glycaemic indexes of buckwheat,oat, quinoa,sorghum, teff and commercial gluten-free bread

The in vitro starch digestibility of five gluten-free breads (from buckwheat, oat, quinoa, sorghum or teff flour) was analysed using a multi-enzyme dialysis system. Hydrolysis indexes (HI) and predicted glycaemic indexes (pGI) were calculated from the area under the curve (AUC; g RSR/100g TAC*min) of reducing sugars released (RSR), and related to that of white wheat bread. Total available carbohydrates (TAC; mg/4 g bread “as eaten”) were highest in sorghum (1634 mg) and oat bread (1384 mg). The AUC was highest for quinoa (3260 g RSR), followed by buckwheat (2377 g RSR) and teff bread (2026 g RSR). Quinoa bread showed highest predicted GI (95). GIs of buckwheat (GI 80), teff (74), sorghum (72) and oat (71) breads were significantly lower. Significantly higher gelatinization temperatures in teff (71 °C) and sorghum flour (69 °C) as determined by differential scanning calorimetry (DSC) correlated with lower pGIs (74 and 72). Larger granule diameters in oat (3–10 μm) and sorghum (6–18 μm) in comparison to quinoa (1.3 μm) and buckwheat flour (3–7 μm) as assessed with scanning electron microscopy resulted in lower specific surface area of starch granules. The data is in agreement with predictions that smaller starch granules result in a higher GI.     

Modification of protein structure and dough rheological properties of wheat flour through superheated steam treatment

Native (NF, 13.5% w.b) and moistened (MF, 27% w.b) wheat flours were treated with superheated steam (SS) at 170 °C for 1, 2 and 4 min, and their protein structure as well as dough rheological properties were analyzed. Confocal laser scanning microscopy (CLSM) and SDS-PAGE patterns indicated the formation of protein aggregates with reduced SDS extractability after treatment. Farinograph and dynamic rheometry measurements showed that the strength as well as elastic and viscous moduli of the dough made from SS-treated flours progressively increased with SS treatment time. And both the improvements were more pronounced for superheated steam-treated moistened flours (SS-MF) than for superheated steam-treated native flours (SS-NF). Size-exclusion high performance liquid chromatography (SE-HPLC) analysis demonstrated that dough rheological parameters have positive correlations with SDS unextractable polymeric proteins (UPP) contents. SS treatment on flours led to a transition of protein secondary structures to more ordered form (α-helix and β-sheet). Additionally, free sulfhydryl (SH) contents decreased after treatment, which implied that disulfide bonds accounted for protein extractability loss and dough rheological properties improvement. Elevated moisture level promoted the modification of both protein structure and dough behaviors of flours during SS treatment.     

Improvement bread characteristics of high level sunn pest (Eurygaster integriceps) damaged wheat by using transglutaminase and some additives

The purpose of this study was to improve the baking quality of high level sunn pest damaged wheat (HLSPDW; 20.6%) sample by using at varying levels transglutaminase, and fixed additive combination (diacetyl tartaric acid esters of mono and diglycerides + citric acid + L-ascorbic acid) with or without transglutaminase. It was observed that transglutaminase plays an important role in baking quality of HLSPDW. The increase in transglutaminase caused very clear increase on bread characteristics of wheat. Bread yield, height, pore structure, and crumb softness values increased sharply; weight loss and wideness of bread samples decreased accurately depending on increasing transglutaminase level. This increase did not affect obviously on bread quality at a certain proportion (0.3%). However, when the transglutaminase was more than 0.3% and depend on increase of percentage, bread characteristics showed significant increase. It was determined that, in the absence of transglutaminase; other additives could not improve the bread qualities examined. The unique application of using transglutaminase was found to be considerably to improve the bread quality of the HLSPDW. Overall results indicate that the properties of the bread from HLSPDW can be restored by the addition of transglutaminase. The highly disrupted protein structure present in the HLSPDW gluten requires higher transglutaminase concentrations.     

Dehydration of gluten matrix as a result of dietary fibre addition – A study on model flour with application of FT-IR spectroscopy

Nowadays, consumers demand dietary fibre-enriched products of appropriate taste, texture, smell and appearance. Unfortunately, addition of the dietary fibre supplements to bread significantly reduces its quality which is connected with changes in the structure of gluten proteins. Structural changes as well as changes in the water state of gluten matrix induced by eight dietary fibres were observed by using Fourier transform infrared spectroscopy. To facilitate this the difference spectra were calculated by subtraction of the control (gluten only) infrared spectrum from the spectra of gluten-fibre mixtures. The presence of positive bands at ca. 1597 and 1235 cm⁻¹ indicated aggregation of gluten proteins into hydrogen bonded β-sheets. These β-sheets can be formed by other β-sheets, antiparallel-β-sheets, β-turns and/or α-helices. The aggregation is probably induced by partial dehydration of gluten matrix due to competition for water molecules between gluten proteins and fibre polysaccharides. This assumption is confirmed by the presence of the negative band at 3237 cm⁻¹ and decrease in the intensity of the band at 3051 cm⁻¹. These bands are assigned to the weak and strong H-bonds in the gluten matrix, respectively. The results indicated that both weak and strong H-bonds are necessary to dough formation of adequate rheological properties.