Radial velocity profiles of water flow in trunks of Norway spruce and oak and the response of spruce to severing

Trunk-tissue heat balance, volumetric and staining methods were used to study xylem water flow rates and pathways in mature Norway spruce (Picea abies (L.) Karst.) and pedunculate oak (Quercus robur L.) trees. The radial profile of flow velocity was confirmed to be symmetrical in spruce, i.e., maximum flow velocity was in the center of the conducting xylem and tailed with low amplitude (about 30 cm h(-1)) in the direction of the cambium and heartwood. Variability around the trunk was high. In contrast, in oak, the radial profile of flow velocity was highly asymmetrical, reaching a peak of about 45 m h(-1) in the youngest growth ring and tailing centripetally for about 10 rings, but variability around the trunk was less, under non-limiting soil water conditions, than in spruce. In spruce, the flow rate increased abruptly within seconds when the tree was severed while immersed in water, and then decreased gradually, showing significant root resistance. We conclude that water flow through an absorbing cut surface differs from the flow higher in a tree trunk because of the presence of hydraulic capacitances in the conductive pathways. The staining technique always yielded higher estimates of flow velocity than the non-destructive tree-trunk heat balance method.     

Real-time spectral classification of compression wood inPicea abies

Compression wood is formed by the living tree to compensate for external loads. It creates wood fibers with properties undesirable in sawn products. Automatic detection of compression wood can lead to production advantages. A wood surface was scanned with a spectrometer, and compression wood was detected by analyzing the spectral composition of light reflected from the wood surface within the visible spectrum. Linear prediction models for compression wood in Norway spruce (Picea abies) were produced using multivariate analysis and regression methods. The resulting prediction coefficients were implemented in a scanning system using the MAPP2200 smart image sensor combined with an imaging spectrograph. This scanning system is capable of making a pixelwise classification of a wood surface in real time. Classification of one spruce plank was compared with analysis by scanning electron microscopy, showing that the automatic classification was correct in 11 of 14 cases.     

Genetic diversity in young and mature cohorts of cultivated and wild populations of Picea asperata Mast (Pinaceae), a spruce endemic in western China

Dragon spruce (Mast) is a conifer endemic to western China and a popular species for reforestation programs of this region. We used inter simple sequence repeats (ISSRs) molecular markers to conduct a population genetic study of nine geographically close stands from three types of dragon spruce forests: (1) intact, (2) plantation, and (3) natural regenerated following clearcut. Our main objective was to investigate the genetic structure of these populations and our expectation was that gene flow was an important evolutionary force among them. We were unable to sample a large number of individuals in each cohort. However, when young and mature cohorts from a particular stand were interpreted as a single unit, then sample size increased significantly. The highest levels of genetic diversity were found in mature cohorts of the intact forests, the lowest in young cohorts of these stands. Contrary to our expectations, low levels of gene flow existed between mature and young cohorts of different forest types; and most gene flow occurred between cohorts belonging to the same stand. There were major differences in the genetic structure of the three types of stands. Our results have conservation implications as the majority of wild populations of dragon spruce are small and fragmented. Low gene flow among populations will lead to high levels of genetic drift and a decline of genetic diversity within populations.     

Variation in Elatobium abietinum Attack on Picea glauca and its Relation to Pissodes strobi Resistance

White spruce (Picea glauca (Moench) Voss) is host to several pests, including the white pine weevil (Pissodes strobi (Peck)) and the green spruce aphid (Elatobium abietinum (Walker)). The larvae of the white pine weevil damage spruce leaders by consuming the cortex while the green spruce aphid is a defoliator. White spruce emblings (seedlings produced by culturing tissues from seed embryos) from 18 families previously ranked for resistance to the white pine weevil were defoliated to varying degrees by the green spruce aphid in a natural outbreak that developed within a holding shadehouse. A strong relationship was shown between damage caused by the aphids and weevil resistance. Emblings ranked as highly weevil - resistant sustained significantly less aphid defoliation.     

Rupture of pit membranes during embedding procedures

Summary Embedding of small wood blocks for study of changes in pit structure during treatments of wood, such as various drying methods, may cause considerable damage to the pit membranes. The sapwood of three species was studied: Sitka spruce, Douglas-fir, and Pacific silver fir. Drying was done by air-drying, freeze-drying, and solvent-seasoning. The principal embedding medium used was butyl-methyl methacrylate. Other media used were celloidin, paraffin, and commercial epoxy and polyester resins.Damage to tracheid bordered pit membranes was found with all media and most woods and drying conditions, although there was much variation. In wood embedded in methacrylate monomers, the damage ranged from nearly aspirated pits, even in unseasoned wood which was solvent exchanged and diffusion embedded, to tori protruding from the aperture and to tori completely dislodged and removed from the pit cavity.The greatest pit damage occurred with nerver-dried wood, which was solvent exchanged and diffusion embedded. Air-dried spruce embedded in celloidin and commerically dried spruce embedded either in epoxy or methacrylate showed no appreciable displacement of tori. Freeze-drying of wood reduced but did not eliminate pit aspiration although the results are somewhat confounded with the effects of embedding. Embedded freeze-dried wood also showed pit damage. In solvent-exchanged embedded wood less aspiration occurred.Rupture of the pit membrane and torus displacement is probably caused by the stresses and plastic flow in the shrinking embedding medium during polymerization of resin systems or cooling of non-resin systems. Care must be taken in observing results of wood treatments that the observations are not brought about by the embedding method itself.

---

Zusammenfassung Die Einbettung kleiner Holzproben zur Untersuchung der Tüpfelstrukturänderungen bei der Behandlung von Holz, z. B. durch verschiedene Trocknungsverfahren, kann zu erheblichen Beschädigungen der Tüpfelmembranen führen. Untersucht wurde das Splintholz dreier Holzarten: Sitka-Fichte, Douglasie und die Pazifik-Silbertanne. Die Trocknung erfolgte durch Luft-, Gefrier- und Lösungsmitteltrocknung. Als Einbettungsmittel wurde hauptsächlich Butyl-Methyl-Methacrylat verwendet, daneben Zelloidin, Paraffin sowie handelsübliche Expoxyd- und Polyester-Harze.Bei allen Einbettungsmitteln, den meisten Holzarten und Trocknungsverfahren wurden Beschädigungen der Tracheiden-Hoftüpfelmembranen festgestellt, allerdings in vielerlei Variationen. Bei in Methacrylatmonomeren eingebettetem Holz reichten die Beschädigungen vom fast geschlossenen Tüpfel, auch in ungetrocknetem lösungsmittel- und diffusionsbehandeltem Holz, bis zu aus der Öffnung herausragenden oder vollständig losgelösten und aus dem Tüpfelhof entfernten Tori.Die größten Schäden entstanden bei Tüpfeln in ungetrocknetem Holz nach Lösungsmittelaustausch und Einbettung. Luftgetrocknetes, in Zelloidin eingebettetes und normal getrocknetes, in Epoxyd- oder Methylacrylat eingebettetes Fichtenholz zeigte keine wesentlichen Tori-Verlagerungen. Gefriertrocknen von Hölzern bewirkte eine Verminderung jedoch nicht vollständige Ausschaltung des Tüpfelhofverschlusses; diese Ergebnisse sind jedoch von den Wirkungen der Einbettung überlagert. Eingebettetes, gefriergetrocknetes Holz wies ebenfalls Tüpfelbeschädigungen auf. Bei Lösungsmittelaustausch und Einbettung des Holzes kam es weniger oft zu Tüpfelhofverschlüssen.Der Bruch der Tüpfelmembranen und die Verlagerung der Tori wird wahrscheinling durch Spannungen und plastisches Fließen in den schrumpfenden Einbettungsmitteln während der Polymerisation der harze oder während der Abkühlung der anderen Einbettungsmedien verursacht. Bei der Untersuchung der Wirkung bestimmter Arten der Holzbehandlung muß daher sorgfältig darauf geachtet werden, daß diese Wirkungen nicht mit jenen der Einbettmethode verwechselt werden.

---

---

The research was financed by the Institute of Forest Products and College of Forest Resources, University of Washington, Seattle.     

Xylem dysfunction in Yezo spruce (Picea jezoensis) after inoculation with the blue‐stain fungus Ceratocystis polonica

The blue‐stain fungus Ceratocystis polonica is pathogenic to Norway spruce (Picea abies) in Europe, as well as to Yezo spruce (Picea jezoensis) and Sachalin spruce (Picea glehnii) in Japan. The wilting mechanism in P. jezoensis saplings after inoculation with C. polonica was examined based on anatomical studies of the phloem and xylem of periodically harvested trees. In addition, the course of sap ascent in the trunks was traced by injection of acid fuchsin solution at harvest. As an initial external symptom, needle discolouration was observed. In dye conduction tests, xylem dysfunction in the xylem of inoculated trees became obvious. The dehydrated xylem area (dry zone) had extended more than 20 cm above the inoculation wounds, within 1 month after inoculation. When the sap flow to the branches had nearly stopped, the leaves began to discolour. Hyphae of C. polonica colonized the ray tissue around the inoculation wounds, but were absent at the front of the dry zones. Defence reactions occurred in ray parenchyma cells adjacent to the penetrating hyphae. It is suggested that secondary metabolites, which are formed by the ray cells and epithelial cells of resin canals, are involved in the obstruction of sap flow. Limited necrotic lesions of the phloem and cambium were not associated with foliar symptoms. It is proposed that the dry zone formation caused by C. polonica is the main mechanism leading to tree death.     

Spruce diameter growth in young mixed stands of Norway spruce (Picea abies (L.) Karst.) and birch (Betula pendula Roth B. pubescens Ehrh.)

A stand-based model for predicting basal-area mean diameter growth for Norway spruce (Picea abies (L.) Karst.) in young mixed stands of spruce and birch (Betula pendula Roth, B. pubescens Ehrh.) was developed and compared with two existing growth models developed for older stands. The main data were from experiments with four different pre-commercial thinning regimes. A multiplicative model with four independent variables was found suitable. The independent variables were total number of trees per hectare of all the species, site index, dominant height of spruce, and a measure of competition between birch and spruce, i.e. dominant height of spruce divided by the dominant height of birch multiplied by the proportion of spruce of total number of trees. The R² value was 0.59 and the coefficient of variation was 12%. A test with an independent data set from the National Forest Inventory (NFI) indicated that the function developed in this study is suitable for young stands at medium to highly productive areas. Large deviations between observed and predicted growth for the two existing functions were revealed in highly productive stands. The tests based on data from the NFI also indicated that the existing function developed for spruce in older mixed stands is suitable for practical purposes for young stands.     

木材可压缩流体渗透中滑流的研究

在气体平均压力倒数为1.4-48atm~(-1)范围内测定了长白鱼鳞云杉和红松木材可压缩流休渗透中滑流效应及影响滑流的因素,论述了木材中流体流动形态和机理。研究表明,两种木材可压缩流体渗透中均产生滑流,但长白鱼鳞云杉中滑流高于红松。前者滑流渗透性与真渗透性百分比、比名义渗透性与真渗透性比、滑流因素分别为69.39％、1.69、0.356atm;后者分别为37.64％、1.376、0.197atm。滑流的大小与木材有效毛细管半径、真渗透性和气体平均压力有高度紧密相关。木材有效毛细管半径愈小,真渗透性愈低,或气体平均压力愈低,则滑流效应愈大。     

In situ measurement of water absorption by fine roots of three temperate trees: species differences and differential activity of superficial and deep roots

The spatial heterogeneity of water uptake by fine roots under field conditions was analyzed in situ with miniature sap flow gauges in a mature beech-oak-spruce mixed stand. Sap flow rate (J), sap flow density (Jd), and root surface-area-specific flow rate (uptake rate, Js) were measured for eight to 10 small-diameter roots (3-4 mm) per species in the organic layer (superficial roots) and in the mineral soil (30-80 cm, deep roots) during four months in summer 1999. We calculated Js by relating J to the surface area of the section of the fine root system distal to the position of the gauge on the root. When measured synchronously, roots of the three species did not differ significantly in mean Js, although oak roots tended to have lower rates. However, Jd decreased in the sequence spruce > beech > oak in most measurement periods. Microscopic investigation revealed differences in fine root anatomy that may partly explain the species differences in Jd and Js. Oak fine roots had a thicker periderm than beech and spruce roots of similar diameter and spruce roots had fewer fine branch rootlets than the other species. Synchronously recorded Jd and Js of nearby roots of the same tree species showed large differences in flow with coefficients of variation from 25 to 150% that could not be explained by patchy distribution of soil water. We hypothesize that the main cause of the large spatial heterogeneity in root water uptake is associated with differences between individual roots in morphology and ultrastructure of the root cortex that affect root radial and root-soil interface conductivities. The high intraspecific variation in Js may mask species differences in root water uptake. Superficial roots of all species typically had about five times higher Jd than deep roots of the same species. However, Js values were similar for superficial and deep roots in beech and spruce because small diameter roots of both species were more branched in the organic layer than in mineral soil. In oak, deep roots had lower Js (maximum of 100 g m(-2) day(-1)) than superficial roots (about 1000 g m(-2) day(-1)). We conclude that temperate tree species in mixed stands have different water uptake capacities. Water flow in the rhizosphere of forests appears to be a highly heterogeneous process that is influenced by both tree species and differences in uptake rates of individual roots within a species.     

Effects of competition and climate variables on modelling height to live crown for three boreal tree species in Alberta,Canada

Using tree data from permanent sample plots and climate data from the ClimateWNA model, mixed-effects height to live crown (HTC) models were developed for three boreal tree species in Alberta, Canada: trembling aspen (Populus tremuloides Michx.), lodgepole pine (Pinus contorta var. latifolia Engelm.) and white spruce (Picea glauca (Moench) Voss). Three model forms, the Wykoff model, a logistic model and an exponential model, were evaluated for each species. Tree height was the most significant predictor of HTC and was used in all models. In addition, we investigated the effects of competition and climatic variables on HTC modelling. Height–diameter ratio and either total stand basal area or basal area of coniferous trees were used as competition measures in the models. Different climate variables were evaluated, and spring degree-days below 0 °C, mean annual precipitation and summer heat–moisture index were incorporated into the aspen, lodgepole pine and white spruce models, respectively. Site index was only significant in lodgepole pine models. Residual variances were modelled as functions of tree height to account for heteroscedasticity still present in the mixed-effects models after the inclusion of random parameters. Based on model fitting and validation results as well as biological realism, the mixed-effects Wykoff models were the best for aspen and white spruce, and the mixed-effects logistic model was the best for lodgepole pine.     

Price dynamics in the Russian–Finnish roundwood trade

Abstract

This study examines price dynamics in roundwood exports from Russia to Finland, the largest international roundwood trade flow within Europe. The analysis covers six main timber assortments; sawlog and pulpwood dimensions of pine, spruce and birch. The study period, starting from the devaluation of the rouble in August 1998, was characterized by a drastic increase in the volumes of Russian roundwood imported into Finland, and a coinciding structural change in the timber assortment distribution of the Finnish roundwood imports. A basic hypothesis of economic theory, the law of one price, was tested by using quarterly time series and methods of cointegration analysis. According to the cointegration tests, the prices of Finnish and Russian spruce sawlogs have moved closely together. Furthermore, the changes in the prices of spruce sawlogs in the Finnish roundwood market are reflected in the Russian prices and not vice versa. Regarding other timber assortments, price co-movement and consequent market integration was not detected.     

Seedling emergence in uneven-aged Norway spruce stands in Finland

The emergence of Norway spruce seedlings on different types of germination sites in uneven-aged Norway spruce dominated stands four years after selection harvesting was studied. The data were collected from 20 stands in southern Finland. In each stand, ground cover was measured from a set of 64 one square metre subplots on a permanent experimental plot of 1600?m². Correlation analysis, direct comparison of subplots with and without seedlings and mixed-effects models were used to estimate the influence of ground and tree cover on seedling occurrence. Grass cover, dwarf shrub cover, cover of certain moss species and close vicinity of trees decreased the occurrence probability and number of seedlings, while greater stand and local basal area around the subplots increased the seedling number. The cover of vegetation free surfaces, usually considered as good germination sites, was rather low. Variation in seedling emergence between plots was high. We concluded that spruce regeneration was slightly more abundant in stands with greater overall stand density and local density within a stand in postharvest conditions.     

Pipe-model ratio distributions and branch foliage biomass: differences between two sympatric spruce species

The foliage biomass–sapwood relationship (the pipe model) is critical for tree growth and is used in tree growth models for understanding the implications of this structural relationship on the allocation of resources. In this research, we compared this relationship for two commercially important and sympatric species, black spruce (Picea mariana (Mill.) B.S.P.) and white spruce (Picea glauca (Moench) Voss). At locations in eastern Canada, 57 black and 50 white spruce trees were destructively sampled to obtain foliage biomass, crown structure, and tree stem measures. Using a model-based approach, we compared foliage biomass–branch basal area and foliage biomass–sapwood relationships at the tree and disk (i.e. along the tree stem) levels (i.e. pipe-model ratios) between these two species. We found that (i) branch foliage biomass–branch basal area was greater for black spruce than white spruce and (ii) pipe-model ratios along the tree stem given tree size were greater for black spruce than for white spruce. We attributed these differences to: (i) greater shade tolerance and leaf longevity of black spruce; (ii) slower growth rates of black spruce; and (iii) differing hydraulic strategies and mechanical requirements.     

Effect of severe thermal treatment on spruce and beech wood lignins

? The structure, proportion and mode of assembly of lignin, celluloses and hemicelluloses have marked effects on the reaction mechanisms during thermal treatment and therefore have a strong influence on the quality of the final product. The effect of treatment conditions, including severe conditions (up to 553 K) and treatment duration (up to 8 h) on the structure of native spruce and beech lignins was studied.

? Lignin content was determined by the Klason method and lignin structure was evaluated by thioacidolysis.

? The results highlighted the strong reactivity of the native spruce and beech lignins towards severe heat treatments. The distinct susceptibility of syringyl (S) and guaiacyl (G) units towards thermal treatment is confirmed by comparing the data for beech and spruce samples. The most severe treatment of spruce wood (280 °C) induced a dramatic enrichment in lignin content together with the almost complete disappearance of G lignin units, whereas a more moderate treatment substantially changed lignin structure by degradation reactions that affect the p-hydroxyphenyl (H) and G lignin units similarly.

? Thioacidolysis revealed that the thermal treatment induces the appearance of vinyl ether structures in spruce lignins. The decreased yield of the G and S thioacidolysis monomers reflects the progressive disappearance of G and S lignin units only involved in β-O-4 bonds and the formation of condensed linkages in proportions related to treatment severity. In severe conditions, β-O-4 linked S units are more degraded than their G homologues.

     

Microclimatic and spruce growth gradients adjacent to young aspen stands

Effective utilization of a patch or cluster approach to growing aspen-white spruce mixtures in the boreal forest requires an understanding of how the faster growing aspen patches influence microclimate and spruce growth in adjacent spruce patches. In this paper we examine, how young (11–13 year old) aspen (Populus tremuloides Michx) patches influence microclimatic conditions in adjacent openings and how these are reflected in the growth of white spruce (Picea glauca [Moench] Voss) on three boreal mixedwood sites in west-central Alberta, Canada. Light levels increased continuously across the aspen stand boundary and reached maximum levels within the opening, while soil moisture was highest near the edge of the opening and then decreased with distance into the aspen stand or into the adjacent opening north of the aspen stand. Light levels were reduced over a greater distance when moving north from aspen stand edges compared to openings located south of the young aspen. These young aspen stands provided growing season frost protection within one tree length from the edge. The growth of white spruce was positively related to initial crown size and either light levels or distance from the edge. Stem volume growth was best predicted by initial tree size and the light levels at the midcrown of seedlings.     

White spruce regeneration following a major spruce beetle outbreak in forests on the Kenai Peninsula, Alaska

Between 1987 and 2000, a spruce beetle (Dendroctonus rufipennis) outbreak infested 1.19 million ha of spruce (Picea spp.) forests in Alaska, killing most of the large diameter trees. We evaluated whether these forests would recover to their pre-outbreak density, and determined the site conditions on which spruce germinated and survived following the spruce beetle outbreak in forests of the Anchor River watershed, Kenai Peninsula, Alaska. White spruce (Picea glauca) and Lutz's spruce (Picea × lutzii), a hybrid between white and Sitka spruce (Picea sitchensis), dominate the study area. We measured the pre- and post-outbreak density of spruce in 108 3 m × 80 m plots across the study area by recording all live trees and all dead trees >1.5 m tall in each plot. To determine the fine scale site conditions on which spruce germinated and survived, we measured ground surface and substrate characteristics within 20 cm circular plots around a subset of post-outbreak spruce seedlings. The density of post-outbreak spruce (855/ha) was adequate to restock the stands to their pre-outbreak densities (643/ha) for trees >1.5 m tall. We could not accurately estimate recovery for pre-outbreak spruce seedlings because dead seedlings may have decayed in the 5–18 years since the beetle outbreak occurred. At the fine scale, spruce that germinated post-outbreak grew on a wide variety of substrates including downed log, stump, mesic organic mat, peat, hummocks and mineral soil. They exhibited a strong preference for downed logs (53%) and stumps (4%), and most (91%) of the downed logs and stumps that spruce rooted on were heavily decayed. This preference for heavily decayed logs and stumps was especially evident given that their combined mean cover was only 2% in the 3 m × 80 m plots. Within the 3 m × 80 m plots, spruce seedling survival was negatively correlated with bluejoint (Calamagrostis canadensis) litter cover.     

Regeneration niches of Norway spruce (<Emphasis Type="Italic">Picea abies</Emphasis> [L.] Karst.) saplings in small canopy gaps in mixed mountain forests of the Bavarian Limestone Alps

Natural regeneration measurements are the main silvicultural objective in overaged protective forests of the Bavarian Limestone Alps. While manifold problems with these stands, especially the impact of browsing, are widely recognised, the regeneration niches of Norway spruce (Picea abies [L.] Karst.) are insufficiently known. The purpose of this study was to determine favourable combinations of site factors for the development of spruce in small, unfenced canopy gaps, located on Aposerido-Fagetum caricetosum albae forest sites. We recorded the occurrence of spruce saplings (as dependent variable) and of six site factors (as independent variables) on 480 0.5 m²-subplots. In addition, we estimated the coverage of six acid adapted plant species to determine correlations with the humus depth. A binary logistic regression analysis was used to predict the probability of the occurrence of a spruce sapling in dependency of the different site factors. Supported by other studies, we assumed that the supply of solar radiation was adequate for the sufficient regeneration of spruce within the canopy gaps. Other site factors significantly determined the regeneration niches of spruce saplings. More spruce saplings were found near hindrances and on rough surfaces than would be expected from a random occurrence of saplings. These microsite types may have characteristics, especially protection against snow gliding that promotes spruce establishment. A calculated “hindrance index”, which accounted for the number, and the distance of surrounding hindrances might be a good specific value to describe the influence of hindrances on steep slopes. The sapling establishment decreased on thin humus layers. Our assumption for the sites was that thick organic layers might represent a good seedbed for spruce. Decayed dead wood was scarce, but was exceedingly favoured by spruce saplings. Results obtained suggest that the natural regeneration establishment of spruce on steep slopes can be successfully influenced by site factors which inhibit the influence of snow gliding. According to a “positive microsite” concept, we recommend for artificial regeneration measurements with spruce, microsites close to hindrances (e.g. stumps, downed trees) and Vaccinium myrtillus as a predictor for thick, acid humus layers.     

Pits and rocky microsites in a subalpine forest stand facilitate regeneration of spruce saplings by suppressing dwarf bamboo growth inside a deer-proof fence

We determined patterns of microsite suppression in dwarf bamboo Sasa nipponica when grazing deer were absent. This bamboo species is able to outcompete Hondo spruce (Picea jezoensis var. hondoensis) saplings under many environmental circumstances. We set up two 10 × 100 m plots inside a deer-proof fence within a subalpine forest on Mt. Ohdaigahara, central Japan, and two similarly sized plots outside the fence. Within the plots, we surveyed microsites where spruce saplings grew. We measured height and shoot elongation of all spruce saplings, and culm height and cover ratios of dwarf bamboo growing around each spruce sapling. Spruce sapling density and average height were higher inside the deer-proof fence than outside, as were bamboo height and cover. Thus, there was a negative effect of deer browsing on vegetation parameters outside the fence and a suppression of the negative effect of bamboo on spruce sapling growth inside the fence. Spruce sapling height was higher in tree-fall pits than in other microsites inside the fence, whereas both dwarf bamboo height and cover were lower in pits and rocky sites than elsewhere. In soil and collar microsites, spruce sapling shoot growth was lower and bamboo height and cover were higher than in pits and rocky sites. Inside the fence, dwarf bamboo cover was high, but pits and rocks suppressed its growth, allowing spruce saplings to flourish. To restore heavily damaged spruce forests with advanced saplings, it will be necessary to construct deer-proof fences and create and maintain microsites with pits and rocks.     

Comparison of the bordered pits of two species of spruce (Pinaceae) in a green and kiln-dried condition and their effects on fluid flow in the stem wood in relation to wood preservation

The relationship between bordered pit aspiration, pit sizesand permeability measured as preservative uptake and expressedas porosity was examined in two species of spruce, Sitka spruce(Picea sitchensis (Bong.) Carr.) grown in the UK and Easternspruce (Picea orientalis (L.) Link.) grown in Turkey, before(in the freshly felled green condition) and after kiln drying.A 2.5 per cent chromated copper arsenate preservative solutionwas allowed to flow in either the longitudinal or tangentialdirection of the stem wood and the uptake was assessed. Borderedpit anatomy was examined by light and scanning electron microscopyand image analysis was used to characterize the samples. Thepermeability of the wood declined following drying but lessso in the Sitka spruce. From an analysis of measurements madeon the wood features it appeared that basic density, latewoodpercentage and degree of pit aspiration were the most importantfeatures explaining these results. The structure of the borderedpits varied between the two species and the relative size ofthe aperture in comparison with the pit chambers was greaterin the Eastern spruce. The effects of these and other variablesincluding differences in conventional drying systems and naturaltree responses to environmental conditions on pit behaviouraffecting permeability are discussed.     

Ecologically based height growth model and derived raster maps of Norway spruce site index in the Western Carpathians

The purpose of this study was to find the ecological factors that most affect height growth of Norway spruce (Picea abies Karst.) over the Western Carpathians. The specific aim was to find climate and soil parameters which are influenced by climate change and can thus be used to make a forest growth model more sensitive to climate. From the results, a regression model was built which can predict top height growth of Norway spruce from ecological parameters. Data collected on 201 plots established within National Forest Inventory of Slovakia were used. The plots selected for the study were distributed almost over the whole Western Carpathians. Mean height of the 20 % largest spruce trees was used as dependent variable. From all investigated ecological factors, the growing season length explained as the number of days with temperature over 5 °C, the carbon-to-nitrogen ratio and soil acidity were shown to have the major impact on top height growth of Norway spruce. Finally, 76 % of total variability in top height was explained by the mentioned site variables. To obtain a user-friendly output, a probability matrix was developed showing the likelihood of a discrete site index to occur on different combinations of site factors. Moreover, raster maps showing the site index of spruce and its probability distribution were developed.