Physicochemical Properties and In Vitro Starch Digestibility of Cooked Rice from Commercially Available Cultivars in Canada

The influence of amylose content, cooking, and storage on starch structure, thermal behaviors, pasting properties, and rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) in different commercial rice cultivars was investigated. Long grain rice with high‐amylose content had a higher gelatinization temperature and a lower gelatinization enthalpy than the other rice cultivars with intermediate amylose content (Arborio and Calrose) and waxy type (glutinous). The intensity ratio of 1047/1022 cm^–1 determined by Fourier Transform Infrared (FT‐IR), which indicated the ordered structure in starch granules, was the highest in glutinous and the lowest in long grain. Results from Rapid ViscoAnalyser (RVA) showed that the rice cultivar with higher amylose content had lower peak viscosity and breakdown, but higher pasting temperature, setback, and final viscosity. The RDS content was 28.1, 38.6, 41.5, and 57.5% in long grain, Arborio, Calrose, and glutinous rice, respectively, which was inversely related to amylose content. However, the SDS and RS contents were positively correlated with amylose content. During storage of cooked rice, long grain showed a continuous increase in pasting viscosity, while glutinous exhibited the sharp cold‐water swelling peak. The retrogradation rate was greater in rice cultivars with high amylose content. The ratio of 1047/1022 cm^–1 was substantially decreased by cooking and then increased during storage of cooked rice due to the crystalline structure, newly formed by retrogradation. Storage of cooked rice decreased RDS content and increased SDS content in all rice cultivars. However, no increase in RS content during storage was observed. The enthalpy for retrogradation and the intensity ratio 1047/1022 cm^–1 during storage were correlated negatively with RDS and positively with SDS (P ≤ 0.01).     

Physicochemical Properties Related to Quality of Rice Noodles

Eleven rice genotypes with diverse Rapid Visco Analyzer (RVA) pasting characteristics were evaluated for their physicochemical and gel textural characteristics relative to their suitability for making rice noodles. Apparent amylose content (AC) was highly correlated with swelling power (r = -0.65, P < 0.05), flour swelling volume (FSV) (r = -0.67, P < 0.05), noodle hardness (r = 0.74, P < 0.01), gumminess (r = 0.82, P < 0.01), chewiness (r = 0.74, P < 0.01), and tensile strength (r = 0.72, P < 0.05). Solubility showed an inverse relationship with the pasting parameters and noodle rehydration, and a positive relationship with cooking loss, noodle hardness, and gumminess. FSV and most of the pasting parameters were negatively correlated with noodle hardness. RVA parameters and textural parameters of gels formed in the RVA canister were well correlated with actual noodle texture and may, therefore, be used for predicting rice noodle quality during early screening of genotypes in breeding programs.     

Use of Mixolab in Predicting Rice Quality

Mixolab is a new instrument with capability to measure starch pasting properties on actual dough. It characterizes dough rheological behavior using a dual constraints of mixing and temperature. Rice samples (183) collected from 15 provinces across China were tested to determine the possibility of using Mixolab in predicting rice quality. Mixolab measurements, torque (Nm) at different mixing and heating stages (C1 to C5) were compared with rice quality characteristics (gelatinization temperature and consistency, amylose and protein contents), Rapid Visco‐Analyser (RVA) parameters and sensory assessments scores of cooked rice. Our results showed that Mixolab parameters were good indicators of amylose and protein content and quality suggested by significant correlations among Mixolab parameters, and between Mixolab and RVA measurements. Based on a subsample of 30 rice cultivars, correlation coefficients between the Mixolab parameter C4 and sensory assessment characteristics of palatability and total sensory score was negatively significant (P < 0.05). C_b (C3 – C4) was also significantly correlated with flavor (P < 0.05). The rice samples that gave high palatability and total sensory scores had low C4 values and low amylose contents. The cooked rice with high flavor had high values of C_b and GT but low protein content. It is possible to determine physicochemical properties of rice flour and sensory characteristics of cooked rice using Mixolab parameters.     

Rheological and physicochemical properties of starches from moist- and dry-type sweetpotatoes

Although starch makes up from 50 to 70% of sweetpotato (SP) dry matter, its role in cooked texture is unknown. The purpose of this research was to characterize raw starches isolated from SP cultivars and experimental selections (C/S) with a wide range of textural properties when cooked and to investigate the relationship between textural properties of the cooked roots and characteristics of the isolated starches. Shear stress measured by uniaxial compression of cooked SP cylinders served as an objective measure of SP texture. Starches were isolated from C/S representing three SP texture types: moist (Jewel and Beauregard); intermediate (NC10-28 and NC2-26); and dry (NC6-30 and NC8-22). The following parameters of isolated starches were measured: amylose content by colorimetric and differential scanning calorimetric (DSC) methods; swelling power, solubility, gelatinization enthalpy (DeltaH), and pasting properties by Brabender amylograph (BA) and rapid viscoanalyzer (RVA). Pasting temperatures for SP C/S measured by BA and RVA were significantly correlated. Due to high shear degradation in RVA, RVA viscosities of starch suspensions decreased as much as 40% during cooking at 95 degrees C, whereas the BA viscosities changed little at this temperature. There were no statistically significant differences among the C/S for amylose or DeltaH. However, significant C/S differences in swelling power, solubility, and pasting properties were observed. Although differences in some rheological and physical properties were observed for C/S starches, shear stress was statistically correlated only with DSC onset temperature (r = 0.78), indicating that factors other than the properties measured on isolated starches are mainly responsible for the texture of cooked SP C/S.     

Effects of Resistant Starch and Fiber from High‐Amylose Non‐Floury Corn on Tortilla Texture

A high‐amylose, non‐floury corn, a floury corn, and a 1:1 blend were made into masa and then tortillas. The masa flour made with the high‐amylose corn had a greater amount of resistant starch (RS 28.8%) and a greater amount of total dietary fiber (TDF 42.1%) than that with the floury corn (RS 2.9%, TDF 9.6%), producing a high‐fiber tortilla. The masa was evaluated for pasting properties using a Rapid ViscoAnalyser (RVA). The high‐amylose masa slurry gelatinized little at 95°C. The floury masa had the greatest peak viscosity, whereas the 1:1 blend was intermediate in value. Sensory evaluations of the tortillas for the textural attributes showed the floury tortillas to be chewier, more rollable, and grittier than the high‐amylose tortillas, whereas the blend tortillas were intermediate for most attributes. The cutting force of the high‐amylose tortillas, measured on a texture analyzer, was very low; the blend and floury tortillas required more force. Chewiness was correlated to rollability (r = 0.99, P = 0.05). The %RS and %TDF were correlated to rollability (r = –0.99), and cutting force (r = 0.99). The floury and blend tortillas had firm textures expected of desirable tortillas, whereas the high‐amylose tortillas broke under little force, and would not roll. The high‐amylose tortillas had high amounts of RS and TDF but poor texture. The blend tortillas retained most floury tortilla textural properties, making them suitable products for consumer use.     

A Better Understanding of Factors That Affect the Hardness and Stickiness of Long‐Grain Rice

Eight U.S. long‐grain rice cultivars were studied for chemical compositions, physicochemical properties, and leaching characteristics in relation to hardness and stickiness of rice flour paste and cooked rice. There were differences in the chemical composition of rice kernels among the eight rice cultivars, including crude protein (6.6–9.3%), crude fat (0.18–0.51%), and apparent amylose content by iodine colorimetry (19.6–27.0%). Differences were also observed in gelatinization temperatures and enthalpies, pasting temperatures and viscosities, leached/insoluble amylose, soluble solids, and hardness and stickiness of rice flour pastes and cooked rice kernels. The quantity and molecular size distribution of the leached starch molecules varied greatly among the samples. Protein and crude lipid contents negatively correlated with hardness of rice flour paste and cooked rice, but positively correlated with stickiness. Apparent amylose content correlated with gel properties but not cooked rice texture, whereas the ratio of A and short B chains to long B chains of amylopectin correlated significantly with cooked rice texture.     

Starch Characteristics Influencing Resistant Starch Content of Cooked Buckwheat Groats

Cooked buckwheat groats are suggested to contain a greater amount of resistant starch (RS) than cereal grains. High RS content, in addition to dietary fibers present in groats, contributes to the low‐calorie, high‐fiber food status of buckwheat. Six buckwheat genotypes exhibiting high, medium, and low RS content of cooked groats were selected, and starches were isolated to determine their functional properties to explore the possible cause of high RS content of cooked buckwheat groats. Apparent and actual amylose contents were 27.4 and 31.6–34.5% in high, 27.4–28.6 and 32.5–33.7% in medium, and 21.4–25.6 and 24.5–32.0% in low RS genotypes, respectively. Genotypes of high RS content exhibited greater amylose leaching based on total starch content during cooking than genotypes of low RS content, mainly because of higher amylose content in the former than latter. Genotypes of low RS content exhibited a relatively high content of amylose‐lipid complexes, as determined with a differential scanning calorimeter (DSC). Gelatinization enthalpy and degree of amylopectin retrogradation determined with a DSC were not related to RS content. An evident relationship was observed between RS content of cooked groats and amylose retrogradation determined by gel hardness (r = 0.91, P < 0.05), cohesiveness (r = 0.89, P < 0.05), and syneresis (r = 0.88, P < 0.05). Increases in starch amylose content, amylose leaching capacity, and amylose retrogradation, as well as a decrease in the amount of amylose‐lipid complexes all appear to be related to high RS content of cooked buckwheat groats.     

Effects of Postharvest Processing on Texture Profile Analysis of Cooked Rice

The effects of drying conditions, final moisture content, and degree of milling on the texture of cooked rice varieties, as measured by texture profile analysis, were investigated. Instrumentally measured textural properties were not significantly (α = 0.05) affected by drying conditions, with the exception of cohesiveness. Cohesiveness was lower in rice dried at lower temperatures (18°C or ambient) than in that dried at the higher commercial temperatures. Final moisture content and degree of milling significantly (α = 0.05) affected textural property values for adhesiveness, cohesiveness, hardness, and springiness; their effects were interdependent. The effects of deep milling were more pronounced in the rice dried to 15% moisture than that dried to 12%. In general, textural property values for hardness were higher and those for cohesiveness, adhesiveness, and springiness were lower in regular-milled rice dried to 15% moisture than in that dried to 12%. In contrast, hardness values were lower and cohesiveness, adhesiveness, and springiness values were higher in deep-milled rice dried to 15% moisture than in that dried to 12% moisture. Deep milling resulted in rice with lower hardness values and higher cohesiveness, adhesiveness, and springiness values.