红皮云杉最佳播种量的研究

本文描述了红皮云杉的最佳播种量的研究，结果表明，其最佳播种量为１５ｋｇ／ｍｕ，这不但可以节约种子，而且还可以提高苗木质量。     

泡桐属植物育种值预测方法的研究

分别用最佳线性无偏预测和最佳线性预测方法预测了泡桐属植物的育种值。结果表明，根据亲缘相关距阵对育种值的最佳线性无偏预测结果没有显著影响：数据量较大时，可用小区平均值取代单株值，同时也可用最佳线性预测代替最佳线性无偏预测方法预测育种值；预测育种值与真正育种值之间的相关系数与预测育种值之间的方法或误差方差存在极显著的相关关系，可用前者作预测育种值的精度指标。通过比较毛泡桐种源所预测育种值之间的方差和误差方差可以得出：在对研究材料评选时，最佳线性预测比最小平方估算法具有优越性，但当重复数大于5次，每个小区内的植株多于6时，这两种预测方法的精度非常接近。     

汽车换档规律及其应用

以汽车换挡规律为依据研制的汽车换档指标器，可以提供合理档位、换档时机和最佳车速等操作信息。它明显地促进了汽车驾驶技术水平的提高，并可以获得１０％左右的节油效果。     

广玉兰全冠移植技术试验研究

试验了采用微喷灌技术与传统的水分管理方法，以及树冠的三种不同修剪方法对广玉兰移植成活率和移植后景观效果的影响，结果表明：全冠移植采用微喷灌技术是高温季节移植最佳的方法，不仅可以保证成活率而且可以快速成景，其次是半叶修剪法。     

巴盟河套灌区盐碱地的综合治理

盐碱土因含有过量的盐分，有毒物质,碱度达大及不良的土壤物理性状，对植物生长生抑制作用，导致区域生态恶化，本文对巴盟河套灌区直碱地的形成，演变规律及历年治理的经验进行了分析，对盐碱地治理，利用的最佳途径进行了探讨，盐碱地治理利用的途径有很多，生物与工种措施并是直碱地治理利用的最佳途径，它可以控制盐碱地的发生，发展使地形平坦，土层深厚，适于机耕，具有潜在肥力的大面积的盐碱地变成良田和森林，达到盐碱地的最佳利用途径，发挥它们的生态和经济效应。     

浅论洞庭湖区发展杨树和林纸业

洞庭湖区发展林纸业具有得天独厚的优势，可以形成农业产业化与工业化的最佳结合，可以使湖区生态环境稳定，水灾损失最小，经济和社会持续发展。但洞庭湖区其主体生态功能是防洪蓄水，无论是种水稻还是林木，都不能破坏洞庭湖的湿地生态环境。另外，洞庭湖区是国家商品粮基地，基本农田应保证生产粮食。     

苏里南木材二氧化硅含量的测定方法

木材中的二氧化硅可以通过光学显微镜，X-射线能谱仪或化学药品处理方式进行定性分析，也可以定量测出二氧化硅的含量，作者用双柱苏木不同的木粉重量做对比试验，得出其二氧化硅含量为0.751%-0.761%。同时证明，5g木粉是测定二氧化硅含量的最佳重量，可以此作为苏里南其他木材二氧化硅含量的测定标准。     

中，俄，蒙沙棘互交可配性研究初报

选用生态类型差异较大、地理起源关系较的中国沙棘、俄罗斯沙棘、蒙古沙棘做亲本，采用盛花期的花粉，在最佳授粉时期进行互交试验，可以获得具有双亲优势的优质杂交种子。     

三倍体毛白杨组培苗温室炼苗试验初报

通过温室炼苗试验研究表明，三倍本毛白杨组培苗温室炼苗选用的最佳基质为：蛭石粉＋泥炭土1：1，既有利于组培苗的成活及生长，又可以简化管理程序，节约育苗成本；三倍体毛白杨的两品系96和73，其组培苗在温室炼苗时，可以采用相同的炼苗基质和管理措施。     

松毛虫越冬幼虫期和蛹期调查方法的研究

通过对松毛虫越冬幼虫期和蛹期最适抽样方法以及最佳抽样株数的确定，可以为松毛虫的预测预报工作以及生产防治提供科学准确的依据。     

Geographic variation and genetic performance of Picea koraiensis in growth and wood characteristics

Eight provenances of 19-year-oldPicea koraiensis Nakai from the provenance trials of Maoershan (45°20′N, 127°30′E), Liangshui (47°10′N, 128°53′E) and Jiagedaqi (50°24′N, 124°07′E) in Northeast China were investigated to analyze the genetic variation in growth characteristics (tree height and diameter) and wood characteristics (tracheid length, tracheid diameter, tracheid wall thickness, annual ring width as well as wood density). Great variation in height growth and breast height diameter growth was observed among the provenances, and along with the increase of tree age, these provenances presented different geographic adaptability. The growth characteristics ofPicea koraiensis stand at age of 10 in Maoershan and Liangshui provenance trials had a positive correlation with longitude, and with increase of tree age to 15 and 19, the tree growth of the provenances displayed a significant positive correlation with latitude as well as altitude. For wood characteristics, great variation was also found among the provenances. There exists a close relation between growth characteristics and wood properties of the provenance. The height and breast height diameter growth of the provenance had a positive correlation with tracheid diameter and annual ring width, and a negative correlation with tracheid wall thickness and wood density. Genetic performance of the provenance in all above characteristics was also investigated in order to provide more useful information for comprehensive selection of this species for pulpwood and plywood production. Foundation item: The paper was supported by National Key Project of The State Forestry Administration. (96-011-01-06) Biography: WANG Qiu-yu (1957-), female, professor in College of Life Sciences, Northeast Forestry University, Harbin 150040, P. R. China. Responsible editor: Song Funan     

油松管胞形态特征的变异

本文研究分析了山西中条山产地油松管胞形态特征的变异。管胞长度自髓心向外,首先迅速增加,13年后管胞长度增加缓慢,20年后保持相对稳定。管胞长度沿树干主轴自基部向上逐渐增加,5.3m高处最长,然后向上变短,树冠区域管胞长度最短。形成层原始细胞长度随着原始细胞年增大,开始递增,达到最大值后又递减。管胞直径、胞壁厚度自髓心向外增加。管胞直径轴向变化由树干基部开始向上增大,然后又减小。管胞长宽比、壁腔比的径向变异与管胞长度的径向变异模式相似。生长轮内管胞长度从早材到晚材,开始减小,然后增加,最小值位于早晚材过渡处。     

火炬松半同胞家系主要经济性状的遗传变异及选择

对1988年营造的火炬松36个半同胞家系测定林的研究结果表明：树高、胸径、材积、木材密度、纤维素含量、管胞长度和宽度等生长和木材性状在家系间有显著的差异，具有较高的遗传力。生长性状和木材性状在一定程度上受遗传因素所控制，树高、胸径、材积间呈正遗传相关关系，木材基本密度、纤维素含量、管胞长度、管胞宽度和材积生长相关关系不显著。据此，利用约束和无约束选择指数，根据纸浆材的要求，进行生长和材性联合选择，评选出82-51、82-89、82-22、82-32、82-5、84-6、82-64、85-32、83-19等9个家系为纸浆材优良家系。     

火炬松半同胞家系遗传测定与早期性状评定

对15年生火炬松半同胞家系的生长和材性性状测定表明:火炬松家系树高、胸径、材积、木材基本密度、纤维素含量、管胞长度与宽度等具有显著的差异;在家系水平上,木材基本密度、纤维素含量、管胞长度与宽度和材积生长相关不明显．遗传力测定表明:家系生长性状与材性性状平均遗传力均较高,达到中等程度以上．对树高生长、胸径生长、木材基本密度、纤维素含量、管胞长度与宽度等性状进行年度相关、早晚期选择研究表明:火炬松家系的生长相关主要由遗传决定;树高从第5年开始,胸径从第4年开始与以后各年的相关系效均在0．7以上,表明以此为最低年龄进行早期选择有较大的可靠性;木材基本密度10年生与其后各年龄级的相关系数值趋于稳定,术材密度最低选择年龄为10年;木材纤维素含量11年生与其后各年龄级的相关系效值趋于稳定,木材纤维素含量的最低选择年龄为11年．     

不同湿地松种源木材材性遗传变异的研究

本文对浙江省长乐林场的湿地松 (Pinuselliottii) 18个种源的木材性质进行测定与分析。结果表明 ,种源间木材气干密度、抗弯强度、抗弯弹性模量和顺纹抗压强度差异极显著 ;管胞长度与宽度、冲击韧性差异显著 ,而管胞壁厚及胞壁率差异不显著 ;种源内木材气干密度、力学强度及胞壁率差异不显著 ,管胞长、宽和壁厚的差异均显著且高于种源间的差异。实验结果表明在种源水平上 ,进行木材气干密度、力学强度和管胞形态的种源选择 ,可取得良好的效果 ;种源内个体管胞形态 (管胞长、宽和壁厚 )变异大于种源间的差异 ,表明湿地松种源材质改良如在种源选择基础上进行个体改良会取得更好的增益。 18个种源木材管胞长度及宽度、管胞壁厚、胞壁率的广义遗传力分别为 :0 36 15、0 5 993、0 74 73、0 16 98;木材气干密度、抗弯强度、抗弯弹性模量、顺纹抗压强度与冲击韧性的广义遗传力分别为 :0 4 14 2、0 2 6 4 6、0 10 82、0 2 977和 0 12 4 6 ;种源树高及胸径的广义遗传力为 :0 4 0 5 7和 0 4 74 7;说明湿地松种源木材管胞性状、木材气干密度及树木生长性状 (胞壁率除外 )受中度或弱度遗传控制 ,通过一定强度的选择 ,能获得较高的遗传增益。本研究还从树木生长性状与管胞形态、力学强度方面对 18个种源进     

Variation in density of Picea sitchensis in relation to within-tree trends in tracheid diameter and wall thickness

The influences of cambial age and ring width on density of Sitkaspruce (Picea sitchensis (Bong.) Carr) were analysed in relationto within-tree trends in tracheid diameter and cell wall thickness.Discs were sampled at breast height from a total of 24 trees,from seven stands at three contrasting sites in Wales, and atbreast height, 30 per cent and 60 per cent total tree heightfrom one of the stands. Across the juvenile wood, ring density decreased with ring numberfrom the pith while radial tracheid diameter increased. Theseoverall trends were considered to be inherent to tree growth,presumably associated with cambial ageing, since they occurredin all trees on all sites. In juvenile wood, density also variedwith site growth rate (as indicated by ring width) at similarcambial age, wider rings being associated with more rapidrateof change in tracheid diameter with ring number and with decreasein tracheid wall thickness. Consequently, on a site having treeswith high growth rate density decreased more rapidly acrossthe juvenile wood, down to a lower minimum value, than on siteswith a slower growth rate. In mature wood, the decrease in densitywith increase in ring width was associated with differencesin both tracheid diameter and wall thickness. Density was slightly(though not significantly) higher at breast height than in comparablerings at 30 per cent total height, associated with significantlythicker tracheid walls at breast height. Changes in radial tracheid diameter (with ring number, or withring width) were associated with greater differences in theearlywood than towards the latewood end of each growth ring,while variations in wall thickness with ring width were associatedwith rate of increase in wall thickness towards the latewoodend. This may account for some previously conflicting reportson influence of silvicultural management on density, for densityis likely to vary with influence of environment on the seasonalcycle of cambial activity. The extent of the juvenile wood as delimited by the inner coreof wide growth rings does not necessarily correspond to theregion of varying tracheid dimensions in Sitka spruce.     

不同红松种源材质性状和生长性状的遗传变异

在东北林业大学帽儿山实验林场,选择了26个17年生红松种源实验林作为研究对象,进行了木材材质性状和生长性状的调查。材质性状包括解剖学性状和物理学性状。解剖学性状测试指标包括,管胞长度、管胞直径和管胞壁腔比。物理学性状指标测定了:生长轮宽度、晚材率和生长轮密度。生长性状方面调查了树高和胸径。统计分析结果表明:各项材质性状和生长性状指标在种源间均存在着显著差异,同时证明各项材质性状均受一定的遗传效应控制;红松的生长性状指标在不同种源间也存在着较大的变异,红松的树高和胸径也受遗传效应的控制;但是,多数材质指标表现为一定的以经向为主的地理变异规律,而红松的生长性状指标如树高和胸径均呈现出一定的纬向变异规律,无经向变异规律。图2表5参6。     

火炬松不同种源纸浆材材性的变异

1983年火炬松31个种源引种栽培在浙江富阳中国林业科学研究院亚热带林业研究所实验林场,研究表明该批种源间10年生树木生长量和纸浆材材性因子如晚材率、管胞形态特征值(管胞长度、宽度、腔径、壁厚、长宽比、腔径比、壁腔比)、管胞S2层微纤丝角和木材基本密度存在着显著差异,木材主要化学成分中纤维素和木素含量种源间存在着显著差异,而戊聚糖和苯醇浸提物含量种源间差异不显著.这些材性特征除了木材化学性状因子外,均受中等以上程度遗传控制.木材纤维素、木素、戊聚糖和苯醇浸提物含量的广义遗传力分别为0.088、0.003、0.340和0.307,其余性状广义遗传力均大于0.50.引种地栽培环境对木材性状有显著影响.种源原产地纬度与树木生长量、管胞宽度、管胞直径和管胞微纤丝角呈负相关,与晚材率、木材密度呈正相关.31个种源树木胸高直径与管胞长宽比、管胞壁腔比、木材密度呈显著负相关,与管胞宽度、管胞直径、管胞腔径比呈正相关.     

Variation pattern of wood properties of naturalCunninghamia lanceolata

In this paper, the variation pattern of wood properties was studied for naturalCunninghamia lanceolata. The mathematical models of property parameters were obtained on tracheid length, microfibril angle, late wood percentage, growth ring width and growth ring density in the radial direction. The interrelation were analyzed between tracheid length and microfibril angle. The result can provide scientific theory basis for wood utilization and early prediction of wood properties.     

Genetic Correlations Among Wood,Growth Capacity and Stem Traits in Pinus sylvestris

Wood density and tracheid length are two traits that significantly affect wood products. Genetic correlations were estimated to evaluate the effect on these traits from a selection for traits included in the Swedish Pinus sylvestris L. breeding programme. Measurements from a non-contiguous single-tree plot progeny trial with controlled matings between 30 parent trees was used. Heritabilities were high for the wood traits, intermediate for the growth capacity traits and low for the stem traits, with the exception of branch angle. Wood density showed no or non-significant negative genetic correlations with the growth capacity traits and a positive correlation with relative branch diameter. Tracheid length showed positive genetic correlations with height and a positive correlation with relative branch diameter. A selection that increased height growth at the age of 13 yrs by 10% was expected to decrease mean wood density at 33 yrs by 1%. The expected correlated response to tracheid length from the same selection was a 3% increase in the juvenile and mature wood.