Transport properties of layered fabric systems based on electrospun nanofibers

Layered fabric systems with electrospun polyurethane fiber web layered on spunbonded nonwoven were developed to examine the feasibility of developing protective textile materials as barriers to liquid penetration using electrospinning. Barrier performance was evaluated for layered fabric systems, using pesticide mixtures that represent a range of surface tension and viscosity. Air permeability and water vapor transmission were assessed as indications of thermal comfort performance. Protection performance and air/moisture vapor transport properties were compared for layered fabric systems and existing materials for personal protective equipment (PPE). Layered fabric systems with electrospun nanofiber web showed barrier performance in the range between microporous materials and nonwovens used for protective clothing. Layered fabric structures with the web area density of 1.0 and 2.0 g/m² exhibited air permeability higher than most PPE materials currently in use; moisture vapor transport was in a range comparable to nonwovens and typical woven work clothing fabrics. Comparisons of layered fabric systems and currently available PPE materials indicate that barrier/transport properties that may not be attainable with existing PPE materials could be achieved from layered fabric systems with electrospun nanofibrous web.     

Effects of structure design on resilience and acoustic absorption properties of porous flexible-foam based perforated composites

In this paper, perforated composite panel was combined with porous and resonance structures to investigate the influence on acoustic absorption and resilient properties. The perforated composite panel was fabricated based on highdensity flexible-foam via perforating and reinforcing with laminated hybrid nonwoven fabric. Effect of aperture size (AS) (ranging from 3 mm to 6 mm), perforation ratio (PR) (5 %, 10 %, 15 % and 20 %) and perforation depth (PD) (25 %, 50 %, 75 % and 100 %) on the compressive hardness, rebound resilience and acoustic absorption properties was explored. Multiply hybrid nonwoven fabric which was fabricated with low-melting point polyester (LMPET), flame-retardant polyester (FRPET) and recycled Kevlar fibers was utilized to reinforce the flexible composites and improve the acoustic property. Nonwoven that was fabricated with entangled LMPET fibers had porous structures which could reinforce the flexible foam and enhance the acoustic absorption properties. The result revealed that the continuity and supporting of porous flexible foam had directly influence the compressive hardness. The maximum hardness of the flexible-foam based perforated composites reached 420 N. The rebound resilience result showed that the sample had high resilient structure and the resilience was up to 48 %. The perforated flexible composites plate (PFP) with 4 mm-AS performed the highest acoustic absorption coefficient at 0.9. The acoustic absorption coefficient was higher than 0.8 in the frequency range from 800 to 1600 Hz and 1600 to 2400 Hz when perforated composites had 4 mm-AS at 5 % and 10 % perforation ratio. With the increase in perforation ratio, absorption peak moved from 3200 Hz to 4000 Hz. Hybrid nonwoven laminated layer help to broaden the frequency range of acoustic absorption of perforated high-density flexible foam based composites panel. Acoustic absorption coefficient was higher than 0.4 when frequency ranging from 900 Hz to 4000 Hz.     

Sound absorption properties of spiral vane electrospun PVA/nano particle nanofiber membrane and non-woven composite material

In this research, we fabricated a series of PVA membranes loaded with 0 wt.%, 1 wt.%, 3 wt.%, 5 wt.% ZrC and 0 wt.%, 1 wt.%, 3 wt.%, 5 wt.% TiO₂ using a spiral vane electrospun machine respectively. There were 2 sizes of TiO₂ nano particles: 10 nm and 200 nm. We tested sound absorption properties of needle-punched nonwovens as well as the composite of nano membranes and needle-punched nonwovens by an impedance tube at the frequency range from 500 Hz to 6500 Hz. Besides, we tested morphological characterization of nano membranes by scanning electron microscope (SEM) and crystalline properties by X-ray diffraction (XRD). We investigated the sound absorption properties of composites as well as the effect of ZrC, TiO₂, nano particle sizes and cavity depth on sound absorption properties. Results showed that sound absorption properties of composites increased at the whole range of frequency compared to those of needle-punched nonwovens. When loaded with ZrC nano particles, sound absorption properties of composite shifted to a higher frequency region, and with increasing content of ZrC, sound absorption properties were better above 2500 Hz. However, when loaded with TiO₂, sound absorption properties were better at lower frequency. With 3 wt.% TiO₂, sound absorption coefficient reached the best at the frequency range from 500 Hz to 1500 Hz. Besides, 200 nm TiO₂ was more conductive to the increase of sound absorption properties at lower frequency region compared to 10 nm TiO₂. Sound absorption properties of composites with air back cavity shifted to a lower frequency region, too. SEM showed that there was nano particle aggregation when loaded TiO₂ nano particles. XRD showed that ZrC nano particles loaded in PVA nano fiber retained their crystalline structure while TiO₂ didn’t. It appeared from the results that nano particles had an effect on sound absorption materials, with different kinds and different sizes, sound absorption properties will improve in different ranges of frequency     

Study on antibacterial and comfort performances of cotton fabric finished by chitosan-silver for intimate apparel

The fabric used for intimate apparel is widely required to have excellent antibacterial and comfort performances. In order to improve its antibacterial ability, this paper studied chitosan-silver finishing on the cotton knitted fabric. The study indicates that the chitosan-silver attached to the fabric exhibits excellent antibacterial action against the typical bacteria of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureu). The anti-bacterial mechanism of chitosan-silver against E. coli and S. aureu were investigated. To guarantee its prominent comfort performance, measurements were made on the finished fabric of its air permeability, water vapor transmission, hydrophily, surface friction and bending ability against the control fabric, which is currently used for intimate apparel. The antibacterial and comfort performances were compared between the tested fabrics. The results show that the air permeability and the hydrophily of the finished cotton fabric are significantly better than the control one, while the water vapor transmission, the surface friction and the adjustable rate remain similar to each other. The bending rigidity of the finished fabric is slightly better due to the attachment of chitosan within accepted threshold. The dual compounding theory of chitosan-silver proves to be useful for a higher synergistic effect of anti-bacteria, lower whiteness degradation and overall optimization of comfort performance. This dual compounding theory of chitosan-silver is valuable for improving antibacterial and comfort performances of intimate apparel.     

Nonwoven fabric/spacer fabric/polyurethane foam composites: Physical and mechanical evaluations

In the first stage, polyethylene terephthalate (PET) fibers and Kevlar fibers are combined at a blending ratio of 80/ 20 wt% in order to form PET/Kevlar nonwoven fabrics. Two pieces of PET/Kevlar nonwoven fabrics that enclose a carbonfiber (CF) interlayer are then needle punched in order to form PET/Kevlar/CF (PKC) composites. In the second stage, the sandwiches compose PKC composites as the top and the bottom layers, as well as an interlayer that is composed of a spacer fabric and polyurethane (PU) foam. PU foams have different densities of 200, 210, 220, 230, and 240 kg/m³. These resulting nonwoven fabric/spacer fabric/PU foam sandwiches are then tested using a drop-weight impact test, a compression test, a bursting strength test, a sound absorption test, and a horizontal burning test. The test results indicate that the optimal properties of sandwiches occur with their corresponding PU foam density as follows: an optimal residual stress (240 kg/m³), an optimal compressive strength (240 kg/m³), and an optimal bursting strength (220 kg/m³). In addition, the sandwiches reach the HF1 level according to the horizontal burning test results. They also have an average electromagnetic interference shielding effectiveness of -48 dB, as well as a sound absorption coefficient of 0.5 in a frequency between 1500-2500 Hz, which indicates a satisfactory sound absorption effect. The nonwoven fabric/spacer fabric/PU foam sandwiches proposed in this study are mechanically strong, sound absorbent, and fire retardant, and can be used in construction material and electromagnetic shielding composites.     

Eco-friendly and Durable Antibacterial Cotton Fabrics Prepared with Polysulfopropylbetaine

A novel antibacterial agent polysulfopropylbetaine (PSPB) bearing carboxyl groups was synthesized and its application on cotton fabric to provide durable antibacterial property was also presented. The successful synthesis of PSPB and its immobilization onto the cotton fabric surface were verified by a series of tests including FTIR, ¹H NMR, XPS and SEM. Viable cell counting method was employed to investigate antibacterial properties of the finished cotton fabrics. It was found that the cotton fabrics treated with PSPB were endowed with desirable antibacterial activity against both gram-negative bacteria Esherichia coli (E.coli, AATCC 6538) and gram-positive bacteria Staphylococcus aureus (S.aureus, AATCC 25922), with the bacterisotatic rates of 99.69 % and 99.95 %, respectively. Notably, the bacterial reduction rates still maintained over 90 % against both bacteria even after 50 consecutive laundering cycles. Moreover, tests concerning the hydrophilicity, air permeability, water vapor transmission, mechanical properties as well as thermal properties were carried out systematically. The experimental results indicated the hydrophilic performance, air permeability and moisture penetrability of the cotton fabrics finished with PSPB were improved greatly in spite of a slight reduction in thermal performance and little obvious influence on mechanical performance. The antibacterial cotton fabric has the potential to be applied in sportswear, underwear, household textiles, medical fields and much more.     

Sound absorbent,flame retardant warp knitting spacer fabrics: Manufacturing techniques and characterization evaluations

This study proposes a combination for reciprocal reinforcement between warp knitting spacer fabrics and PU foams. PET/Kevlar nonwoven fabrics are made with an 80:20 ratio and an incorporation of various needle-punching speed of 100, 150, 200, 250, and 300 needles/min. Ascribing to having an optimal bursting strength, sound absorption coefficient, and limited oxygen index (LOI), the PET/Kevlar nonwoven fabric that is made by 200 needles/min are selected to be combined with a glass-fiber fabric by applying needle punch in order to form a surface layer. Next, warp knitting spacer fabrics and the nonwoven fabrics are laminated, followed by being combined with polyurethane (PU) foam that are featured with different densities of 200, 210, 220, 230, and 240 kg/m³ in order to form spacer fabric/PU foam composites with multiple functions. The composites are then tested with a drop-weight test, a compression test, a bursting strength test, a sound absorption test, and a horizontal burning test. The test results indicate that all spacer fabric/PU foam composites reach a horizontal burning level of HF1, and their sound absorption coefficients at 2500-4000 Hz also suggest a satisfactory sound absorption. In particular, the optimal residual stress and compressive strength are present when the composites contain 210 kg/m³ PU foam. Similarly, the optimal bursting strength of the composites occurs when they are composed of 230 kg/m³ PU foam. The spacer fabric/PU foam composites are proven to have high strengths, sound absorption, and fire retardant, and thus have promising potentials for use as construction materials and light weight composite planks.     

Functional modification of sanitary nonwoven fabric by chitosan/nanosilver colloid solution and evaluation of applicability

For their functional enhancement, sanitary nonwoven fabrics with a relatively smooth surface were treated using chitosan, a natural polymer with excellent biocompatibility, and nanosilver colloid solution, which has strong antibacterial effects even when used in small amounts. The treatment effect was examined at various mixing ratios. When the mixing ratio of the nanosilver solution was higher, antibacterial and deodorization activity was increased. For CH3/NS1 treated fabric, when the mixing ratio of chitosan and nanosilver solution was 3:1, the air permeability was most excellent, and worked as a positive in improving the pleasantness of the sanitary nonwoven fabric. In all samples, the electrostatic propensity was reduced, regardless of the mixing ratio. In terms of the moisture characteristics of chitosan/nanosilver treated nonwoven fabrics, the moisture uptake was found to be superior in the CH3/NS1 treated fabric. When the mixing ratio of the nanosilver solution was higher, moisture permeability decreased, showing a similar tendency to that of air permeability. The vertical water permeability coefficient increased in all treated fabrics. The dynamic water absorption rate was good in CH4 and CH3/NS1 treated fabrics. This means that the absorption of water in the liquid state became easier, thus improving applicability as sanitary nonwoven fabrics.     

Sound absorption of multiple layers of nanofiber webs and the comparison of measuring methods for sound absorption coefficients

Textile sound absorbents are getting more and more popular on the market as noise reduction is a major requirement for human comfort today. In this paper we focus on a new textile material for sound absorption, by investigating the acoustic characteristics of nanofibers. Through impedance tube method we measured the sound absorption coefficients of multiple layers of nanofiber webs and compared those with microfiber materials per fabric weight. We also examined the effect of layers of nanofiber webs on regularfiber knitted fabric on sound absorption. The test results showed that the sound absorption coefficients of nanofiber layers were superior that of microfiber fabrics in the frequency range 1000–4000 Hz. In this range, the sound absorption of nanofiber webs improved with numbers of layers. Also, adding nanofiber web plies to regularfiber fleece increased the sound absorption coefficient with 85 % at 4000 Hz. From our results we could observe differences in the sound absorption coefficients between two test methods, which are higher absorbance coefficients through the reverberation room method than impedance tube method.     

Characterization of acoustic-absorbing inter/intra-ply hybrid laminated composites under dynamic loading

This study prepared the novel laminated composites composed of a cushioning layer with double identical hybrid surface reinforcement laminates based on Kevlar fiber (KF)/carbon fiber (CF) and evaluated their acoustic and mechanical performance. The effects of reinforcing fiber type, fiber blending ratio, needle-punching frequency, and laminated sequence on the static bursting, dynamic cushioning and acoustic absorption ability of the composites were individually investigated. Results revealed that the cushioning capacity of the KF-hybrid composites was always superior to that of the CF-hybrid composites. The dynamic cushioning capacity of a hybrid composites with the cushioning layer at the intermediate position was superior to that of samples with a cushioning layer at the top and bottom positions. The CF-hybrid composites exhibited higher acoustic absorption coefficient at low (125 to 500 Hz) to mid frequencies (500 to 2000 Hz) but a lower value at high frequencies (2000 to 4000 Hz) than the KF-hybrid composites. The acoustic absorption curve and the corresponding sound absorption average were significantly affected by the needle-punching frequency. This influence diminished with an increase in needle-punching frequency. The cushioning layer at the top position enhanced the absorption ability at low to mid frequencies. Thus, the hybrid construction with a cushioning layer at the middle position and double hybrid laminated cover plies was the optimal structure for acoustic absorption.     

The efficacy of coconut fibers on the sound-absorbing and thermal-insulating nonwoven composite board

The aim of this study is to examine the efficacy of the coconut fiber on the sound absorption and thermal insulation performance towards the composite nonwoven fabrics. The 2D polyester fiber and 12D fire retardant three-dimensional hollow crimp polyester fiber are individually mixed with 4D low-melting point polyester fiber (4DLMf) to produce 2D polyester nonwoven fabric (2D-PETF) and 12D polyester nonwoven fabric (12D-PETF) respectively. Subsequently, the coconut fiber (CF) is then laminated with the 2D-PETF and 12D-PETF to fabricate two types of PET/CF composite boards through the multiple needle-punching techniques. Accordingly, the sound absorption, thermal insulation, Limiting Oxygen Index and relative mechanical properties of the PET/CF composite boards are evaluated properly. The experimental results reveal that both types of PET/CF composite boards possess excellent thermal insulation performance and fire resistance property. Also, for both types of PET/CF composite boards, the average sound absorption coefficient increases with the increased amount of CF.     

Investigation of air permeability of core spun cotton/spandex weft knitted structures under relaxation

In this research work, air permeability variations of core spun cotton/spandex single jersey and 1×1 rib knitted structures were studied under relaxation treatments. Results are compared with similar fabrics made from 100 % cotton material. Even though cotton/spandex fabrics knitted with same stitch lengths, their structural spacing and stitch densities vary with the progression of treatments. Similar behavior was also observed with 100 % cotton knitted structures. Under higher machine set stitch lengths (i.e., lower fabric tightness factor), higher structural spacing and lower stitch densities were resulted and those variations significantly affected on the air permeability variations of knitted structures. 1×1 rib knitted structures showed significantly higher air permeability than single jersey structures and it is more prominent with cotton rib structures. However, cotton/spandex 1×1 rib and single jersey structures have not showed such significant deviations. Air permeability of cotton/spandex and 100 % cotton rib and single jersey knitted structures decreased with lower machine set stitch lengths (i.e., at higher fabric tightness factors). There was a correlation with fabric tightness, air permeability, areal density and fabric thickness such as knitted fabrics became tighter, their weight and thickness were higher, while their air permeability was lower. Thus, fabric areal density and fabric thickness are positively correlates to machine set stitch length^?1 (fabric tightness factor). Air permeability of a knitted structure depends on material type, knitted structure, stitch length, relaxation treatment, structural spacing and stitch density.     

Hemp-fiber based nonwoven composites: Effects of alkalization on sound absorption performance

The effects of the material and treatment parameters on airflow resistivity and normal-incidence sound absorption coefficient of alkalized three layered nonwoven composites have been studied. The material parameters included fiber size and porosity. The treatment factors included the temperature, duration and concentration. The alkalized composite was a three-layered nonwoven sandwich structure consisting layers of Polypropylene/Hemp/Polypropylene. Alkalization treatment has been found to result in a loss of basis weight and a decrease in air flow resistivity. Among treatment factors, only temperature was found to be a statistically-significant factor on air flow resistivity. Higher-temperature alkalization leads to higher air flow resistivity compared to the lower-temperature treatment. Alkalization at higher temperature and higher concentrations gives better results in normalized sound absorption performance compared to lower-temperature and lower-concentration treatments, respectively.     

Manufacturing technique and acoustic evaluation of sandwich laminates reinforced high-resilience inter/intra-ply hybrid composites

This study focused on the fabrication and acoustic property evaluation of sandwich cover-ply-reinforced highresilience thermal-bonding nonwoven hybrid composites. P-phenyleneterephthalamides and bicomponent high-resilience bonding polyester intra-ply hybrid nonwoven fabrics were compounded with glass plain fabric to produce the high strength sandwich structural cover ply by means of needle punching and thermal bonding to reinforce the whole composites and dissipate energy when being impacted. Then, the acoustic absorption properties of the homogenous intra-ply hybrid meshwork layer were investigated before and after being reinforced with the aforementioned cover ply. The influencing factors, including areal density, fiber blending ratio, needle punching depth, and air cavity thickness between back plate of the impedance tube and composites, were comparatively investigated. Results revealed that hybrid composites exhibited exceedingly high acoustic absorption properties. Acoustic absorption coefficients were promoted with increases in areal densities and fiber blending ratio of 3D crimped hollow polyester, particularly at low-mid frequency range. In addition, needle punching depths and back air cavity thicknesses considerably affected the average absorption coefficients. The meshwork center layer reinforced with sandwich structural cover-ply perform high resilience properties.     

Gelation Modification of Alginate Nonwoven Fabrics

Calcium alginate nonwoven fabrics were gelation-modified by two-stage with aqueous HCl solution and then ethanolic NaOH solution. The structure and crystallinity properties of the samples were characterized by FT-IR, SEM, and XRD. The preparation conditions and modification mechanism were investigated. The results indicated that the crystal structure of calcium alginate fibers was destroyed; the crystallinity and calcium ion content decreased after HCl treatment. This resulted from the formation of ester bonds among the hydrolytic molecules after NaOH treatment. The best gel performance was obtained at the HCl concentration of 0.05-0.1 wt% with the NaOH concentration in ethanol of 2–4 mol/l. The liquid absorption of nonwoven alginate fabrics increased by 145 %. The water capability increased by 2673 % after modification, while the thickness, mass per unit area, permeability, and tensile strength of nonwoven alginate fabrics changed little.     

Process technology and performance evaluation of functional knee pad

In this study, Polylactic Acid (PLA) nonwoven fabric and thermoplastic polyurethane (TPU) honeycomb air cushion (TPU-HAC) were employed to form an impact resistant layer for functional knee pads. PLA nonwoven fabric has low manufacture cost and flexibility of the honeycomb air cushion improved the quality of functional knee pad sold in the market. This study focused on the strength of PLA nonwovens and the impact resistance of TPU honeycomb air pads. The PLA fibers and low-melting-point (low-Tm) PLA fibers are used as raw materials to fabricate PLA nonwoven fabric. The PLA fibers and low-melting-point PLA fibers were mixed at weight ratios of 10, 20, 30, 40, and 50 %. PLA nonwoven fabric and TPU-HAC materials were combined in a sandwich structure to protect against impact. Impact resistance was evaluated using a falling-weight impact-resistance machine. Experimental findings indicate that changing various layers can improve the impact resistance of the sandwich structure of the TPU-HAC materials. A TPU-HAC layer with a thickness of 2/8/10 mm optimized the impact resistance. In 25 J falling-weight impact test, the TPU-HAC layer 2/8/10 mm provides an impact resistance of 2932 N; the PLA/TPU-HAC composite had the best impact resistance; 2516 N. PLA nonwoven fabric had the best mechanical properties with low-Tm PLA fibers at 30 % weight. The impact resistance achieved using above combination of materials met the level 2, range 3 impact values mentioned in EN 14120 standards.     

The influence of water jet pressure settings on the structure and absorbency of spunlace nonwoven

Nowadays, the use of nonwovens as absorbent products is increasing. One of the most important methods for the nonwoven production is spunlace. This research evaluates the effect of spunlace nonwoven structures in wicking, water retention, water vapor permeability and porosity structural parameter of nonwoven. Carded webs from polyester fibers and viscous fibers of four different basis weights (35, 40, 45, and 50 g/m²) were hydroentangled using three different water jet pressures (50, 60, and 70 bar). To study the effect of these variables on the structure of nonwovens and absorbency related properties, sample’s characteristics such as thickness and mass density were measured. An electrical resistance technique was used to study the liquid penetration into nonwovens. The results showed that with increasing water jet pressure, mass density increased and other parameters like thickness, water retention, water vapor permeability and capillary pore size decreased. Also, it was observed with increasing basis weight, the sample thickness increased. On the other hand, with increasing weight, the amount of water retention, water vapor permeability and porosity structural parameter of nonwoven were reduced. The wicking characteristic of nonwovens using the least jet pressure and weight was the best of all the samples.     

Investigating ballistic impact properties of woven kenaf-aramid hybrid composites

In this study, the ballistic impact performance of woven kenaf-Kevlar hybrid and non-hybrid composites against fragment simulating projectiles (FSPs) was investigated. All the composites were prepared using the hand lay-up technique, method, followed by static load compression. The hybrid composites consist of Kevlar fabric and woven kenaf layers. The results obtained indicate that the energy absorption, ballistic limit velocity (V ₅₀) and failure behaviour of the composites during the impact event were affected by the woven kenaf hybridisation. The additional kenaf layers in hybrid composites resulted in the increase in composites thickness and areal density, thus increased the energy absorption (14.46 % to 41.30 %) and V ₅₀ (5.5 % to 8.44 %). It was observed that the hybrid composites failed through a combination of fibre shear, delamination and fibre fracture in the impacted surface, woven kenaf-Kevlar interface and rear surface respectively. Although the specific energy absorption was lower for the hybrid composites, further investigations need to be carried out to utilise the great potential natural fibres.     

Evaluation of aroma functionality imparted on natural indigo-dyed cotton fabrics

Long-term efficacy of aroma microcapsules on natural indigo-dyed cotton fabric was evaluated by objective and subjective tests. The fixation of aroma microcapsules was carried out by pad-dry-cure process on dyed cotton fabric. Mercerized cotton fabric was dyed with natural indigo obtained from Polygonum tintorium (via the modified Niram method) and subsequently padded with melamine-formaldehyde microcapsules containing aroma essential oil (natural source of a Chinese arborvitae 20-25 %). Softener was applied in the same (one-step) or sequential (two-step) padding bath. We confirmed that microcapsules were fixed on cotton fibers by SEM analysis. The addition of softener was not much effective for the fabric performances on softness or air permeability. All the colorfastness ratings were above 4/5 and the color difference was within the acceptable range of 1.62-2.08. The efficacy of fabric samples stored for 2 years was evaluated using the GC/MS-headspace technique and the samples stored for 0.5, 1.5, and 2.5 years were also evaluated in terms of aroma release by the human perception test. Bornyl acetate was confirmed as the main component of essential oil, which was continuously released by the microcapsule-treated fabric (D/MC) during storage for more than 2 years. In durability and human perception tests, the microcapsules on the cotton fabric were stable to laundering, rubbing, ironing, and light.     

Structural characterization of LbL assembled multilayers by using different polyelectrolytes on cotton fabrics

An alternative approach to application of chitosan based on layer by layer (LbL) assembled technique is studied in this paper. For this aim, chitosan (CHT) was used as a bio-based cationic polyelectrolyte and pentasodium tripolyphosphate (TPP) and poly(sodium 4-styrene sulfonate) (PSS) were selected as anionic polyelectrolyte. TPP/CHT and PSS/CHT based bilayers were fabricated on the cationized woven cotton fabrics via layer-by-layer self-assembly technique. The characterization of coatings on the fabric surface in terms of surface appearance, atomal content, and chemical bondings were made in detail through SEM, XPS, and FTIR-ATR analysis. Also, the antibacterial activity, air permeability, and water contact angle were measured. Surface analyses demonstrate the interaction between TPP, PSS and chitosan separately. XPS spectra also showed the existence of LbL deposition over cotton substrates in terms of both elemental composition and the presence of different types of bondings on the fabric surface. The antibacterial activity analysis revealed that the modified cotton fabric with the addition of CHT/TPP and CHT/PSS bilayers could increase the degree of inhibition on K. pneumanie and S. aureus bacteria.