Heat-induced gelation of chicken Pectoralis major myosin and beta-lactoglobulin

The denaturation, aggregation, and rheological properties of chicken breast muscle myosin, beta-lactoglobulin (beta-LG), and mixed myosin/beta-LG solutions were studied in 0.6 M NaCl, 0.05 mM sodium phosphate buffer, pH 7.0, during heating. The endotherm of a mixture of myosin and beta-LG was identical to that expected if the endotherm of each protein was overlaid on the same axis. The maximum aggregation rate (AR(max)) increased, and the temperature at the AR(max) (T(max)) and initial aggregation temperature (T(o)) decreased as the concentration of both proteins was increased. The aggregation profile of <0.5% myosin was altered by the presence of 0.25% beta-LG. Addition of 0.5-3.0% beta-LG decreased storage moduli of 1% myosin between 55 and 75 degrees C, but increased storage moduli (G') when heated to 90 degrees C and after cooling. beta-LG had no effect on the gel point of > or =1.0% myosin, but enhanced gel strength when heated to 90 degrees C and after cooling. After cooling, the G' of 1% myosin/2%beta-LG gels was about 1.7 times greater than that of gels prepared from 2% myosin/1% beta-LG.     

Gelling properties of heat-denatured beta-lactoglobulin aggregates in a high-salt buffer

Thermal denaturation, rheological, and microstructural properties of gels prepared from native beta-lactoglobulin (beta-LG) and preheated or heat-denatured beta-LG (HDLG) aggregates were compared. The HDLG was prepared by heating solutions of 4% beta-LG in deionized water, pH 7.0, at 80 degrees C for 30 min and then diluted to the desired concentration in 0.6 M NaCl and 0.05 M phosphate buffer at pH 6.0, 6.5, and 7.0. When reheated to 71 degrees C, HDLG formed a gel at a concentration of 2% protein. At pH 7.0, 3% HDLG gelled at 52.5 degrees C and had a storage modulus (G') of 2200 Pa after cooling. beta-LG (3%) in 0.6 M NaCl and 0.05 M phosphate buffer, pH 7.0, did not gel when heated to 71 degrees C. The gel point of 3% HDLG decreased by 10.5 degrees C and the G' did not change when the pH was decreased to 6.0. The HDLG gel microstructure was composed of strands and clumps of small globular aggregates in contrast to beta-LG gels, which contained a particulate network of compacted globules. The HDLG formed a gel at a lower concentration and lower temperature than beta-LG in the high-salt buffer, suggesting an application in meat systems or other food products prepared with salt and processed at temperatures of < or =71 degrees C.     

Gelation of chicken pectoralis major myosin and heat-denatured beta-lactoglobulin

Thermal, rheological, and microstructural properties of myosin (1 and 2% protein) were compared to mixtures of 1% myosin and 1% heat-denatured beta-lactoglobulin aggregates (myosin/HDLG) and 1% myosin and 1% native beta-lactoglobulin (myosin/beta-LG) in 0.6 M NaCl and 0.05 M sodium phosphate buffer, pH 6.0, 6.5, and 7.0 during heating to 71 degrees C. Thermal denaturation patterns of myosin and myosin/HDLG were similar except for the appearance of an endothermic peak at 54-56 degrees C in the mixed system. At pH 7.0, 2% myosin began to gel at 48 degrees C and had a storage modulus (G') of 500 Pa upon cooling. Myosin/HDLG (2% total protein) had a gel point of 48 degrees C and a G' of 650 Pa, whereas myosin/beta-LG had a gel point of 49 degrees C but the G' was lower (180 Pa). As the pH was decreased, the gel points of myosin and myosin/HDLG decreased and the G' after cooling increased. The HDLG was incorporated within the myosin gel network, whereas beta-LG remained soluble.     

alpha-Casein improves the gel properties of dried egg white

The effects of addition of alpha-casein (alpha-CN) to dried egg white (DEW) were investigated by measuring transparency, hardness, and water-holding capacity (WHC) of the heat-induced gels. A DEW concentration of 8% (w/w) was required for formation of a self-supporting gel following heating at 80 degrees C for 20 min at pH 7. Solutions of alpha-CN, even up to a protein concentration of 12% (w/w), did not gel under the same conditions. The addition of alpha-CN (0.5-4%) to 8% DEW caused the increase in gel hardness gels, as compared with DEW gels alone at a total amount of protein concentrations, and the mixed gels became transparent with the increase of added alpha-CN concentrations. The 10% mixed protein solutions of alpha-CN (3-6%) and DEW (4-7%) formed transparent gels, although each protein did not gel individually at their protein concentrations. Mixture with 2:8 mixing ratio of alpha-CN to DEW at a total protein concentration of 10% showed synergistic effects in improving DEW gel properties above pH 7 and below 25 mM NaCl. The improvements (hardness, transparency, and WHC) of DEW gel by alpha-CN seem to be caused mainly by the inhibition of alpha-CN against heat coagulation of DEW protein.     

Ability of alphas-Casein to suppress the heat aggregation of ovotransferrin

The effects of alphas-casein on heat aggregation of ovotransferrin (OT) were studied by heating at 80 degrees C for 20 min in 10 mM phosphate buffer, pH 7.0. The heat interactions between alphas-casein and OT were followed by turbidity development and polyacrylamide gel electrophoresis. We found that alphas-casein can effectively suppress the heat-induced aggregation of heat-labile OT. The suppressive ability of alphas-casein was reduced by the presence of NaCl on heating. Dephosphorylated alphas-casein had less ability to suppress the aggregation of OT than native alphas-casein. Our results indicate that alphas-casein interacts with the heat-denatured OT through its exposed hydrophobic surface and phosphoserine residue. Such interactions seem to be important in helping to suppress the aggregation of heated OT. The suppressive effects of alphas-casein on heat aggregation of OT would be partially ascribed to the formation of transparent gel from egg white by the addition of alphas-casein.     

Heat-induced gel formation by soy proteins at neutral pH

Heat-induced gel formation by soy protein isolate at pH 7 is discussed. Different heating and cooling rates, heating times, and heating temperatures were used to elucidate the various processes that occur and to study the relative role of covalent and noncovalent protein interactions therein. Gel formation was followed by dynamic rheological measurements. Heat denaturation was a prerequisite for gel formation. The gelation temperature (84 degrees C) was just above the onset denaturation temperature of glycinin. The stiffness of the gels, measured as the elastic modulus, G', increased with the proportion of denatured protein. An increase in G' was also observed during prolonged heating at 90 degrees C. This increase is explained by the occurrence of rearrangements in the network structure and probably also by further incorporation of protein in the network. The increase in G' upon cooling was thermoreversible indicating that disulfide bond formation and rearrangements do not occur upon cooling.     

Beta-lactoglobulin molten globule induced by high pressure.

Beta-lactoglobulin (beta-LG) was treated with high hydrostatic pressure (HHP) at 600 MPa and 50 degrees C for selected times as long as 64 min. The intrinsic tryptophan fluorescence of beta-LG indicated that HHP treatment conditions induced a conformational change. HHP treatment conditions also promote a 3-fold increase in the extrinsic fluorescence of 1-anilinonaphthalene-8-sulfonate and a 2.6-fold decrease for cis-paraneric acid, suggesting an increase in accessible aromatic hydrophobicity and a decrease in aliphatic hydrophobicity. Far-ultraviolet circular dichroism (CD) spectra reveal that the secondary structure of beta-LG converts from native beta-sheets to non-native alpha-helices following HHP treatment, whereas near-ultraviolet CD spectra reveal that the native tertiary structure of beta-LG essentially disappears. Urea titrations reveal that native beta-LG unfolds cooperatively, but the pressure-treated molecule unfolds noncooperatively. The noncooperative state is stable for 3 months at 5 degrees C. The nonaccessible free thiol group of cysteine121 in native beta-LG became reactive to Ellman's reagent after adequate HHP treatment. Gel electrophoresis with and without beta-mercaptoethanol provided evidence that the exposed thiol group was lost concomitant with the formation of S-S-linked beta-LG dimers. Overall, these results suggest that HHP treatments induce beta-LG into hydrophobic molten globule structures that remain stable for at least 3 months.     

肉蛋白-畜产源非肉蛋白互作的物理化学研究

为了研究典型畜产源非肉蛋白与肌原纤维蛋白(MP)的相互作用,建立了模拟肉制品加工条件下二者等比例用量的溶液及热致凝胶模型,将血浆蛋白(PPP)、鸡蛋白分离蛋白(EPI)和酪蛋白酸钠 (SC)分别与MP 按照1∶1比例混合,以各单一蛋白为对照,利用流变仪、质构仪和低场核磁等仪器测定各蛋白粘度、加热过程的动态粘弹性、凝胶强度和水分子状态等指标。结果表明,PPP和EPI在加热过程中自身可形成凝胶,但与MP相比,储能模量(G')较弱,SC在加热过程中未能形成凝胶。将PPP和EPI分别与MP混合时,流变结果显示,PPP+MP、EPI+MP相互作用指数均大于零,与单独的MP相比,其G'无显著差异;加入PPP未能显著改变MP的凝胶强度,但加入EPI显著提高了MP的凝胶强度(P<0.05);PPP、EPI的加入均能使凝胶保水性显著提高,不易流动水比例增大(P<0.05)。SC会对MP产生一定不利影响,二者相互作用指数小于零,其G'、凝胶强度及凝胶保水性显著降低(P<0.05)。总体而言,PPP、EPI与MP之间在加热后均产生正向相互作用,而SC对MP产生不利影响。本研究结果为凝胶乳化类肉制品中非肉蛋白的应用提供了一定的理论借鉴。     

Effect of milk concentration on the irreversible thermal denaturation and disulfide aggregation of beta-lactoglobulin

The kinetics of beta-lactoglobulin (beta-LG) denaturation in reconstituted skim milk samples of various concentrations (9.6-38.4% total solids) over a wide temperature range (75-100 degrees C) was studied. The thermal denaturation of beta-LG had a reaction order of 1.5 at all milk solids concentrations and at all temperatures. The rate of denaturation of beta-LG was markedly dependent on the milk solids concentration and the heating temperature. At 75 degrees C, the thermal denaturation of beta-LG was retarded at higher milk solids concentrations. However, this retardation was less pronounced at higher temperatures so that a similar rate of denaturation was observed at all milk solids concentrations at 100 degrees C. From an examination of the level of disulfide-aggregated beta-LG, it was evident that most, but not all, of the denatured beta-LG was involved in disulfide-aggregated complexes, either with other denatured whey proteins or with the casein micelles. As with beta-LG denaturation, the rate of disulfide aggregation of beta-LG was markedly dependent on the milk solids concentration.     

Heat-induced redistribution of disulfide bonds in milk proteins. 1. Bovine beta-lactoglobulin

Changes in the structure and chemistry of beta-lactoglobulin (beta-LG) play an important role in the processing and functionality of milk products. In model beta-LG systems, there is evidence that the aggregates of heated beta-LG are held together by a mixture of intermolecular non-covalent association and heat-induced non-native disulfide bonds. Although a number of non-native disulfide bonds have been identified, little is known about the initial inter- and intramolecular disulfide bond rearrangements that occur as a result of heating. These interchange reactions were explored by examining the products of heat treatment to determine the novel disulfide bonds that form in the heated beta-LG aggregates. The native protein and heat-induced aggregates were hydrolyzed by trypsin, and the resulting peptides, before and after reduction with dithiothreitol, were separated by high-performance liquid chromatography and their identities confirmed by electrospray ionization mass spectrometry. Comparisons of these peptide patterns showed that some of the Cys160 was in the reduced form in heated beta-LG aggregates, indicating that the Cys160-Cys66 disulfide bond had been broken during heating. This finding suggests that disulfide bond interchange reactions between beta-LG non-native monomers, or polymers, and other proteins could occur largely via Cys160.     

Reversible conformational change in beta-lactoglobulin A modified with N-ethylmaleimide and resistance to molecular aggregation on heating

beta-Lactoglobulin A (beta LG A) modified with N-ethylmaleimide (NEM-beta LG A) was purified by ion exchange chromatography, and modification of beta LG A by NEM was confirmed by time of flight mass spectrometry and 5,5'-dithiobis(2-nitrobenzoic acid) methods. The fluorescent spectrum of NEM-beta LG A was slightly different from that of native beta LG A. NEM-beta LG A gave no polymerization after heating at 80 degrees C and pH 7.5, as shown by polyacrylamide gel electrophoresis. Conformational change of NEM-beta LG A was observed at 80 degrees C by ultraviolet differential spectra, whereas after cooling it recovered to its original state as before heating, indicating apparent reversible thermal denaturation. Native beta LG A is resistant to pepsin hydrolysis, whereas heated beta LG A was easily hydrolyzed by pepsin. NEM-beta LG A before heating was also resistant to pepsin hydrolysis, and after heating NEM-beta LG A was still resistant to pepsin hydrolysis. These results indicate that NEM-beta LG A maintained a conformation similar to its native form even after heating. Addition of 0.2 M NaCl to the beta LG A heated under salt-free condition induced polymerization of heated beta LG A molecules, but not that of heated NEM-beta LG A. This seemed to indicate that the formation of inter- or intramolecular disulfide linkage made the heat-induced conformational change of beta LG A irreversible.     

Influence of binding of sodium dodecyl sulfate, all-trans-retinol, palmitate, and 8-anilino-1-naphthalenesulfonate on the heat-induced unfolding and aggregation of beta-lactoglobulin B

Heat treatment of bovine beta-lactoglobulin B (beta-LG) causes it to partially unfold and aggregate via hydrophobic association and intra- and interprotein disulfide bonds. The first stage, which involves a "loosening" of the native structure, is influenced by the environmental conditions, such as pressure, pH, and added solutes. In the present study, four potential beta-LG ligands [palmitate, sodium dodecyl sulfate (SDS), 8-anilino-1-naphthalenesulfonate (ANS), and all-trans-retinol (retinol)] were added to beta-LG solutions prior to heat treatment for 12 min at temperatures between 40 and 93 degrees C. The extent of the changes in secondary and tertiary structures, unfolding, and aggregation at 20 degrees C were determined by circular dichroism, fluorescence, and alkaline- and SDS-polyacrylamide gel electrophoresis (PAGE). Both palmitate and SDS stabilized the native structure of beta-LG against heat-induced structural flexibility, subsequent unfolding, and denaturation. Retinol was less effective, probably because of its lower affinity for the calyx-binding site, and ANS did not stabilize beta-LG, suggesting that ANS did not bind strongly in the calyx. It was also noted that holding a beta-LG solution with added SDS or ANS promoted the formation of a hydrophobically associated non-native dimer.     

Combined influence of NaCl and sucrose on heat-induced gelation of bovine serum albumin

The combined influence of a strongly interacting cosolvent (NaCl) and a weakly interacting cosolvent (sucrose) on the heat-induced gelation of bovine serum albumin (BSA) was studied. The dynamic shear rheology of 4 wt % BSA solutions containing 0 or 20 wt % sucrose and 0-200 mM NaCl was monitored as they were heated from 30 to 90 degrees C at 1.5 degrees C min(-)(1), held at 90 degrees C for 120 min, and then cooled back to 30 degrees C at -1.5 degrees C min(-)(1). The turbidity of the same solutions was monitored as they were heated from 30 to 95 degrees C at 1.5 degrees C min(-)(1) or held isothermally at 90 degrees C for 10 min. NaCl had a similar effect on BSA solutions that contained 0 or 20 wt % sucrose, with the gelation temperature decreasing and the final gel strength increasing with increasing salt concentration and the greatest changes occurring between 25 and 100 mM NaCl. Nevertheless, the presence of sucrose did lead to an increase in the gelation temperature and final gel strength and a decrease in the final gel turbidity. The impact of NaCl on gel characteristics was attributed primarily to its ability to screen electrostatic interactions between charged protein surfaces, whereas the impact of sucrose was attributed mainly to its ability to increase protein thermal stability and strengthen the attractive forces between proteins through a preferential interaction mechanism.     

"Weak gel"-type rheological properties of aqueous dispersions of nonaggregated kappa-carrageenan helices

The rheological properties of kappa-carrageenan helices dispersed in an aqueous medium, which prevents aggregation of helices, were investigated. A dispersion of 1.5% w/w nonaggregated kappa-carrageenan helices exhibited gel-like dynamic mechanical spectra at 20 degrees C; that is, the storage modulus G' predominated over the loss modulus G' ' in the entire frequency range examined (0.5-100 rad/s). However, the observed slight frequency dependence of the moduli and the relatively large value of tan delta (= G' '/G' > 0.1) were typical of so-called weak gels. The magnitude of G' of the kappa-carrageenan weak gels was less than that of conventional gels formed by 0.15% w/w kappa-carrageenan in an aggregating condition at 20 degrees C. Under large deformation, enough for the conventional gels to rupture, the weak gel systems flowed but never ruptured, suggesting that the weak gel-type rheological properties of the kappa-carrageenan dispersions were due to a sufficiently long relaxation time of topological entanglements among double-helical conformers but not due to the formation of a three-dimensionally percolated permanent network.     

Effects of high-pressure processing at low temperature on the molecular structure and surface properties of beta-lactoglobulin

High-pressure processing (HPP) was utilized to induce unfolding of beta-lactoglobulin (beta-LG). beta-Lactoglobulin solutions at concentrations of 0.5 mg/mL, in pH 7.5 phosphate buffer, were pressure treated at 510 MPa for 10 min at either 8 or 24 degrees C. The secondary structure, as determined by circular dichroism (CD), of beta-LG processed at 8 degrees C appeared to be unchanged, whereas beta-LG processed at 24 degrees C lost alpha-helix structure. Tertiary structures for beta-LG, as determined by near-UV CD, intrinsic protein fluorescence spectroscopy, hydrophobic fluorescent probe binding, and thiol group reactivity, were changed following processing at either temperature. The largest changes to tertiary structure were observed for the samples processed at 24 degrees C. Model solutions containing the pressure-treated beta-LG showed significant decreases in surface tension at liquid-air interfaces with values of 54.00 and 51.69 mN/m for the samples treated at 24 and 8 degrees C, respectively. In comparison, the surface tension for model solutions containing the untreated control was 60.60 mN/m. Changes in protein structure during frozen and freeze-dried storage were also monitored, and some renaturation was observed for both storage conditions. Significantly, the sample pressure-treated at 8 degrees C continued to display the lowest surface tension.     

Tyrosinase-aided protein cross-linking: effects on gel formation of chicken breast myofibrils and texture and water-holding of chicken breast meat homogenate gels

The effects of Trichoderma reesei tyrosinase-catalyzed cross-linking of isolated chicken breast myofibril proteins as a simplified model system were studied with special emphasis on the thermal stability and gel formation of myofibrillar proteins. In addition, tyrosinase-catalyzed cross-linking was utilized to modify the firmness, water-holding capacity (WHC), and microstructure of cooked chicken breast meat homogenate gels. According to SDS-PAGE, the myosin heavy chain (MHC) and troponin T were the most sensitive proteins to the action of tyrosinase, whereas actin was not affected to the same extent. Calorimetric enthalpy (DeltaH) of the major thermal transition associated with myosin denaturation was reduced and with actin denaturation increased in the presence of tyrosinase. Low-amplitude viscoelastic measurements at constant temperatures of 25 degrees C and 40 degrees C showed that tyrosinase substantially increased the storage modulus (G') of the 4% myofibrillar protein suspension in the 0.35 M NaCl concentration. The effect was the most pronounced with high-enzyme dosages and at 40 degrees C. Without tyrosinase, the G' increase was low. Tyrosinase increased the firmness of the cooked phosphate-free and low-meat chicken breast meat homogenate gels compared to the corresponding controls. Tyrosinase maintained gel firmness at the control level of the low-salt homogenate gel and weakened it when both salt and phosphate levels were low. Tyrosinase improved the WHC of the low-meat and low-salt homogenate gels and maintained it at the level of the corresponding controls of phosphate-free and low-salt/low-phosphate homogenate gels. Microstructural characterization showed that a collagen network was formed in the presence of tyrosinase. Keywords: Chicken myofibrillar proteins; protein modification; cross-linking; tyrosinase; gelation; thermal stability; texture; water-holding capacity; microstructure.     

Control of heat-induced aggregation of whey proteins using casein

The ability of alphas1/beta-casein and micellar casein to protect whey proteins from heat-induced aggregation/precipitation reactions and therefore control their functional behavior was examined. Complete suppression (>99%) of heat-induced aggregation of 0.5% (w/w) whey protein isolate (pH 6.0, 85 degrees C, 10 min) was achieved at a ratio of 1:0.1 (w/w) of whey protein isolate (WPI) to alphas1/beta-casein, giving an effective molar ratio of 1:0.15, at 50% whey protein denaturation. However, in the presence of 100 mM NaCl, heating of the WPI/alphas1/beta-casein dispersions to 85 degrees C for 10 min resulted in precipitation between pH 6 and 5.35. WPI heated with micellar casein in simulated milk ultrafiltrate was stable to precipitation at pH>5.4. Protein particle size and turbidity significantly (P相似文献   

Gelation of protein recovered from whole Antarctic krill (Euphausia superba) by isoelectric solubilization/precipitation as affected by functional additives

This study demonstrated that the novel isoelectric solubilization/precipitation can be applied to recover functional muscle protein in a continuous mode from whole Antarctic krill. Protein recovered from whole krill had a much lower ash content than whole krill, suggesting good removal of inedible impurities (shell, appendages, etc.). Lipids were retained to a higher degree with krill protein solubilized at acidic rather than basic pH. The viscoelastic modulus (G') showed that recovered krill protein failed to form heat-induced gel unless beef plasma protein (BPP) was added. Therefore, protease inhibitors are suggested for development of krill-derived products. Even with BPP, the G' decreased between 45 and 55 degrees C. However, krill protein solubilized at acidic pH had a higher decrease of the G' than the protein solubilized at basic pH, likely due to krill endogenous cathepsin L. Krill protein-based gels developed from protein solubilized at basic pH, especially pH 12.0, had better texture (torsion and Kramer tests and texture profile analysis) than acidic counterparts, possibly due to higher proteolysis and denaturation at acidic pH. Gels made from protein solubilized at acidic pH were brighter and whiter likely due to a higher lipid content.     

Functional improvements in dried egg white through the Maillard reaction.

The effects of the Maillard reaction on the functional properties of dried egg white (DEW) were investigated. Maillard-reacted DEW (M-DEW) was prepared by storing sugar-preserved DEW (SP-DEW) at 55 degrees C and 35% relative humidity for 0-12 days. The M-DEW developed an excellent gelling property, and hydrogen sulfide production from heat-induced M-DEW gels decreased. Surface sulfhydryl (SH) group content of M-DEW increased while total SH group and alpha-helix contents decreased with increasing heating time in the dry state. Breaking strength, breaking strain, water-holding capacity, and hydrogen sulfide of heat-induced M-DEW gels significantly correlated with surface and total SH group contents in M-DEW. SDS-PAGE revealed that M-DEW proteins were polymerized in which covalent bonds were involved. The present study demonstrated that the Maillard reaction partially unfolds and polymerizes proteins of SP-DEW and, consequently, improved gelling property of SP-DEW under certain controlled conditions.     

Interactions of whey proteins during heat treatment of oil-in-water emulsions formed with whey protein isolate and hydroxylated lecithin

The interactions of proteins during the heat treatment of whey-protein-isolate (WPI)-based oil-in-water emulsions with and without added hydroxylated lecithin were studied by examining the changes in droplet size distribution and the quantity and type of adsorbed and unadsorbed proteins. Heat treatment at 90 degrees C of WPI emulsions resulted in an increase in total adsorbed protein; unadsorbed beta-lactoglobulin (beta-lg) was the main protein interacting with the adsorbed proteins during the first 10 min of heating, but after this time, unadsorbed alpha-lactalbumin (alpha-la) also associated with the adsorbed protein. In emulsions containing hydroxylated lecithin, the increase in total adsorbed protein during heat treatment was much lower and the unadsorbed beta-lg did not appear to interact with the adsorbed proteins during heating. However, the behavior of alpha-la during heat treatment of these emulsions was similar to that observed in the emulsions containing no hydroxylated lecithin. In the presence of NaCl, the particle size of the emulsion droplets and the quantities of adsorbed protein increased markedly during heating. Emulsions containing hydroxylated lecithin were less sensitive to the addition of NaCl. These results suggest that the binding of hydroxylated lecithin to unfolded monomers or intermediate products of beta-lg reduces the extent of heat-induced aggregation of beta-lg and consequently decreases the interactions between unadsorbed beta-lg and adsorbed protein. This was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) of heated whey protein and hydroxylated lecithin solutions.