Radial variation of wood density components and ring width in cork oak trees

The radial variation of ring width and wood density was studied in cork oaks (Quercus suber) using microdensitometry. The observations were made in young never debarked cork oaks (30–40 years of age) and in mature trees under cork production (37–60 years of age). The cork oak wood is very dense (mean ring density 0.86 g.cm^?3, between 0.79 g.cm^?3 and 0.97 g.cm^?3) with a small intra-ring variability (mean earlywood density 0.80 g.cm^?3 and latewood density 0.90 g.cm^?3). The density components decreased from pith to bark more rapidly until the 15th ring, and then only slightly. There were no significant differences in the mean density components between never debarked trees and trees under cork production but their outwards decrease was accentuated in the never debarked trees. The annual growth was high, with a ring width mean of 3.9 mm (4.2 mm in the first 30 years) and the latewood represented 57% of the annual growth.     

Early assessment of density features for 19 Eucalyptus species using X-ray microdensitometry in a perspective of potential biomass production

Eucalyptus plantations have been considered for bioenergy production and hence their biological characteristics that make them amenable to intensive short-rotation forestry. Wood density is an important parameter that directly affects fuel production. This study focuses on the early assessment of density features for 19 Eucalyptus species using X-ray microdensitometry in a perspective of potential biomass production. Average ring density, earlywood density, latewood density, latewood percentage and the heterogeneity index were studied. E. polyanthemos registered the highest mean wood density value (0.84 g cm^?3), and E. viminalis showed the lowest value (0.53 g cm^?3). An indicator for the potential wood biomass (PWB) was calculated, with E. maculata displaying the highest biomass production index (13.4 kg). Comparison of radial growth of these species showed appreciable differences. The PWB indicator points to the prospective good aptitude for short-rotation cycle for biomass production of E. maculata, E. botryoides, E. globulus, E. nitens and E. sideroxylon.     

Influence on pulping yield and pulp properties of wood density of Acacia melanoxylon

Wood density and pulp yield are key parameters in the evaluation of tree productivity and quality for pulping and their relationships are of high practical importance. The influence of wood density on pulp yield and other pulp quality parameters was investigated using Acacia melanoxylon and its natural variability as a case study. Twenty trees were harvested (five trees in each of four sites in Portugal), and wood discs taken at different height levels, from the base to the top of the tree, providing 100 wood samples, covering the natural variability of wood density ranging from 449?kg?m^?3 to 649?kg?m^?3. Under the same experimental conditions of kraft pulping, screened pulp yield ranged 47.0?C58.2?%, Kappa number 10.9?C18.4, ISO brightness 14.9?C45.6, fibre length 0.660?C0.940?mm and fibre width 16.2?C22.9???m. The pulp yield and Kappa number were not correlated with wood density. Higher pulp yields were associated with lower Kappa numbers and alkali consumption, suggesting the important role of chemical composition of wood on kraft cooking. The results confirm the high pulping potential of Acacia melanoxylon trees grown in Portugal and suggest the possibility of tree selection using both wood density and pulp yield.     

Variability of selected wood characteristics in 40 half-sib families of black spruce (Picea mariana)

Summary Based on 15-year-old black spruce (Picea mariana) trees from 40 half-sib families sampled from 9 blocks of a family test in New Brunswick, this study examined intertree and intratree variation in various wood density and ring width characteristics. Of various variance components of the intertree variation, a remarkable variance component due to family was found in wood density characteristics (viz. average wood density, average earlywood density and latewood density of the tree), and these characteristics are thus under strong genetic control (h _i ² ranging from 0.60 to 0.86, and h _f ² from 0.56 to 0.68). It, to a lesser extent, applies to ring width characteristics at the tree level (viz. average ring width, and average earlywood width, latewood width and latewood percent of the tree) that show a lower heritability (h? from 0.18 to 0.28, and h _f ² from 0.22 to 0.36). Both block and block × family interaction contribute little to the total intertree variation encountered in 40 families from 9 blocks, while tree-to-tree variation within the family accounts for most (over 3/4) of the total intertree variation.Compared to the intertree variation (tree-to-tree variation within the family), the intratree variation in various wood characteristics studied is considerably larger in this species. It appears that most intraring wood density characteristics show a relatively smaller intertree variation but a relatively larger intratree variation as compared to ring width characteristics (except latewood width and latewood percent). Latewood width and latewood percent show the smallest intertree variation and the largest intratree variation. Between the two sources of the radial intratree variation, cambial age explains much more variation in most intraring wood density characteristics, while ring width accounts for more variation in earlywood width, latewood width and intraring density variation. This indicates that wood density of growth rings in this species is dependent more on cambial age than ring width (growth rate). Among various wood density and ring width characteristics studies, maximum (latewood) density shows the strongest response to calendar year. This characteristics is thus a useful dendroclimatic parameter in this species.I would like to thank Dr. E.K. Morgenstern and Mr. D. Simpson for their involvement in the planning of this study. Thanks are also due to G. Chauret, T. Keenam, R. Ploure, V. Steel and C. Reitlingshoefer for their technical assistance     

Influence of initial planting spacing and genotype on microfibril angle,wood density,fibre properties and modulus of elasticity in Pinus radiata D. Don corewood

Pinus radiata D. Don trees from six clones, grown at initial spacings of 2500 stems ha⁻¹ and 833 stems ha⁻¹ were destructively harvested. For these trees wood properties were measured on radial slices sampled at a height of 1.4 m above the ground. Relative to wide spacing, close initial stand spacing significantly reduced microfibril angle (MFA) and ring width and significantly increased dynamic modulus of elasticity (MOE), fibre length, latewood percentage and cell wall thickness. Density and fibre width were not significantly different between spacing treatments. Examination of the influence of genetic population on wood properties indicated that genotype significantly influenced MFA, MOE and ring width. The key wood properties MFA, MOE and fibre length were regressed against tree diameter, height and stem slenderness. All three wood properties were most strongly correlated with stem slenderness. Multiple regression models developed for MFA, MOE and ring width accounted for respectively 62%, 81% and 58% of the variation in these variables. The following changes occurred in sampled properties with increasing ring number: MFA and ring width declined markedly; MOE and fibre length increased markedly; latewood percentage and cell wall thickness increased slightly; and density and fibre width did not show any radial trend.     

Effect of growth on wood properties for Japanese larch (Larix kaempferi): Differences of annual ring structure between corewood and outerwood

To investigate the relations between growth and the wood properties of Japanese larch (Larix kaempferi), six sample trees of varied ages and radial growth were felled and the ring width, ring density, percentage of latewood, and some other factors were determined. There were significant differences in ring density and percentage of latewood between sample trees with vigorous growth and those with poor growth. In corewood the ring density decreased with increasing ring width for all sample trees, whereas in outerwood this trend did not appear. Moreover, the latewood width increased with the increment of ring width only in outerwood, whereas there was almost no change in the corewood. The variation in patterns of ring width, ring density, and percentage of latewood in the radial direction and the relation with height was also studied.Part of this report was presented at the 47th annual meeting of the Japan Wood Research Society, Kochi, April 1997     

Variation in wood density and carbon content of tropical plantation tree species from Ghana

Most research on carbon content of trees has focused on temperate species, with less information existing for tropical trees and very little for tropical plantations. This study investigated factors affecting the carbon content of nineteen tropical plantation tree species of ages seven to twelve and compared carbon content of Khaya species from two ecozones in Ghana. For all sample trees, volume of the main stem, wood density, wood carbon (C) concentration and C content were determined. Estimated stem volume for the 12-year-old trees varied widely among species, from 0.01 to 1.04 m³, with main stem C content ranging from 3 to 205 kg. Wood density among species varied from 0.27 to 0.76 g cm^?3, with faster growing species exhibiting lower density. Significant differences in wood density also occurred with position along the main stem. Carbon concentration also differed among tree species, ranging from 458 to 498 g kg^?1. Differences among species in main stem C content largely reflected differences among species in estimated main stem volume, with values modified somewhat by wood density and C concentration. The use of species-specific wood density values was more important for ensuring accurate conversion of estimated stem volumes to C content than was the use of species-specific C concentrations. Significant differences in wood density did exist between Khaya species from the wet and moist semi-deciduous ecozones, suggesting climatic and site factors may also need to be considered. Wood densities for these plantation grown trees were lower than literature values reported for the same species in natural forests, suggesting that the application of data derived from natural forests could result in overestimation of the biomass and C content of trees of the same species grown in plantations.     

Variation of indole acetic acid (IAA) amounts in cambial-region tissues in 7- and 24-year-old sugi (Cryptomeria japonica) trees

Recently, breeding programs have attempted to produce high growth rates for shorter rotation cycles in plantation trees. In these trees, the ratio of juvenile wood increases; thus, the juvenile wood properties should be improved for structural use. To this end, it is important to understand the influences on juvenile wood properties precisely. In this study, we report on the indole acetic acid (IAA) amounts of juvenile sugi (Cryptomeria japonica) trees in September and compare the IAA amounts to those in mature trees. The IAA amounts at the lower trunks in juvenile trees were significantly larger than those in mature trees and the IAA amounts decreased with tree height. In each stand, except a mature tree stand, there is no significant effect of IAA amounts on latewood width and MFA. However, put together all samples, the latewood width and MFA increased with IAA amounts in samples with IAA <200 ng/cm². The samples at lower trunk in juvenile trees had significantly larger IAA amounts, larger MFA and larger latewood width than the samples in mature trees (p < 0.01). The very large IAA amounts may have a certain relation with juvenile wood properties.     

When tree rings behave like foam: moderate historical decrease in the mean ring density of common beech paralleling a strong historical growth increase

? Context

While historical increases in forest growth have been largely documented, investigations on historical wood density changes remain anecdotic. They suggest possible density decreases in softwoods and ring-porous hardwoods, but are lacking for diffuse-porous hardwoods.

? Aims

To evaluate the historical change in mean ring density of common beech, in a regional context where a ring-porous hardwood and a softwood have been studied, and assess the additional effect of past historical increases in radial growth (+50 % over 100 years), resulting from the existence of a positive ring size–density relationship in broadleaved species.

? Methods

Seventy-four trees in 28 stands were sampled in Northeastern France to accurately separate developmental stage and historical signals in ring attributes. First, the historical change in mean ring density at 1.30 m (X-ray microdensitometry) was estimated statistically, at constant developmental stage and ring width. The effect of past growth increases was then added to assess the net historical change in wood density.

? Results

A progressive centennial decrease in mean ring density of ?55 kg?m^?3 (?7.5 %) was identified (?10 % following the most recent decline). The centennial growth increase induced a maximum +25 kg?m^?3 increase in mean ring density, whose net variation thus remained negative (?30 kg?m^?3).

? Conclusions

This finding of a moderate but significant decrease in wood density that exceeds the effect of the positive growth change extends earlier reports obtained on other wood patterns in a same regional context and elsewhere. Despite their origin not being understood, such decreases hence form an issue for forest carbon accounting.     

Genetic control of intra-ring wood density variation in hybrid larch (Larix gmelinii var. japonica × L. kaempferi) F1

Genetic parameters for various wood density traits were estimated in 29-year-old trees of 18 full-sib families of hybrid larch (Larix gmelinii var. japonica × Larix kaempferi) F₁. Intra-ring density variation (IDV) was also evaluated using a model that expresses the pattern curve from earlywood to latewood as a power function. A high IDV indicates an abrupt change in wood density from earlywood to latewood. The ring width and wood density traits of individual rings were determined by X-ray densitometry. Overall wood density (RD) was shown to increase with increasing ring number, ranging from 0.42–0.59 g/cm³, whereas IDV of individual rings decreased gradually from pith outwards. Estimates of individual tree narrow-sense heritability of RD and IDV were 0.66 and 0.67, respectively. IDV showed negative genetic and phenotypic correlations with RD (r _g = −0.99, r _p = −0.72). The predicted genetic gains in latewood proportion and IDV were higher than that of RD. These results suggest that the intra-ring density variation is under moderate genetic control equivalent to wood density. The trend of increasing wood density from earlywood to latewood was associated with changes in both tracheid diameter and cell wall thickness.     

木材材性株内径向变异模式初探VI19个杉木种源木材密度径向变异模式的研究

以微密度分析对19个种源杉木的木材密度径向变异模式进行了研究.不同种源间和种源内株间,年轮平均密度的径向变异曲线都存在一定的变异,但此变异主要表现在种源内株间.年轮平均密度的幼龄-成熟相关性从第3年起就极显著.由微密度分析得出的一系列密度和年轮宽特征值间的相关分析表明,在年龄影响下的变异过程中,年轮内密度变异曲线随年轮宽的变动导致晚材率变动的效应较为显著,年轮平均密度主要受晚材率影响;年轮平均密度与年轮宽呈特别显著的负相关.而在种源影响下的变异过程中分析,上述效应不明显,而不同种源间密度变异曲线的上下移动影响显著;年轮平均密度主要受早材平均密度影响;年轮平均密度与年轮宽的负相关远不如在年龄影响下的变异过程中显著.     

Wood properties and their among-family variations in 10 open-pollinated families of Picea jezoensis

This study aimed to evaluate radial and among-family variations of wood properties in Picea jezoensis. A total of 174 trees were randomly selected from 10 open-pollinated families in a progeny trial for measuring stem diameter, dynamic Young’s modulus of log (DMOE_log), annual ring width (ARW), air-dry density (AD), modulus of elasticity (MOE), and modulus of rupture (MOR). Mean values of DMOE_log, AD, MOE, and MOR were 9.60 GPa, 0.41 g/cm³, 9.44 GPa, and 76.6 MPa, respectively. Significant differences among families were observed in all properties. F values obtained by analyzing variance in wood properties were higher than those generally observed in growth traits. In addition, F values in wood properties remained relatively higher from the 1st to 25th annual ring from the pith, although F value in ARW rapidly decreased with each increase in annual ring number. These results indicate that genetic factors largely contributed to the variance in wood properties compared with the growth traits.     

Within- and between-tree variation of wood density components in <Emphasis Type="Italic">Pinus nigra</Emphasis> at six sites in Portugal

Key message

In Europe, P. nigra wood presents a density pattern of longitudinal variation with an increase from east to west. However, no latitudinal tendencies were detected. Compared to other Portuguese resinous species, P. nigra revealed higher density, identical radial growth and intra-ring heterogeneity, which presents advantages for industry purposes. The environmental factors (Sites effect) manifest more strongly in the latewood components while the Trees/Sites effect is more strongly expressed in the earlywood components.

Context

Although P. nigra Arnold is one of the most important conifers in Europe, little is known about the wood’s characteristics in the southwest European region.

Aims

Our aims are to outline a first approach to study the growth and wood quality in P. nigra in Portugal comparing to other European natural stands and other resinous species.

Methods

Inter- and intra-wood density variation of P. nigra from six Portuguese sites was studied using microdensitometry. Analysis of variance (ANOVA) was performed in three subsets: 50 common rings, core (juvenile wood) and peripheral analysis (mature wood).

Results

The average ring density was 0.588 g cm^?3, with maximum values in the north and low altitudes. Regarding growth traits, no latitudinal and altitudinal tendencies were detected. Compared to the main timber species in Portugal (P. pinaster Aiton), P. nigra showed similar radial growth, higher density but lower intra-ring density homogeneity. The Sites effect mainly influenced latewood density components, while the Trees/Sites effect primarily influenced earlywood components. The Rings effect was found to be relatively low, with a density decrease in the tree’s first years followed by an increase in the periphery. Growth traits showed a reduction from pith to bark.

Conclusion

Considering the quality (density) and growth features of the Black pine, this species could be useful for the reforestation of mountainous Southern Europe areas that are not favourable for other species.

     

Ring characteristics and screw withdrawal resistance of naturally regenerated <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> var. <Emphasis Type="Italic">formosana</Emphasis> trees

The ring characteristics and screw withdrawal resistance (SWR) of naturally regenerated Taiwan yellow cypress (Chamaecyparis obtusa var. formosana) trees were explored. Significant differences in average ring width (RW), earlywood width, latewood width, ring density (RD), earlywood density (ED), latewood density (LD), highest density (D_max), lowest density (D_min), latewood percentage (LWP), and SWR were observed between trees, rings (SWR excluded), and tree height positions. The RW components in the radial direction increased from the pith outward to about the 3rd to 5th ring and then decreased to about the 25th ring; it was almost constantly sustained toward the bark side. The RD in the radial direction slowly decreased from the pith outward to the bark side. Average ring width and ring density were significantly affected by the various tree growth rates, radial ring numbers, and tree height positions. ED, LD, D_max, D_min, and LWP were the most important factors determining the overall RD. RW did not correlate with tree RD. SWR is correlated with ED, RD, D_min, LWP, and intra-ring density variation (IDV). Thus, the SWR can be used to predict wood density and in nondestructive evaluation of a living tree.     

Variation in wood properties ofPinus kesiya Royle ex Gordon (syn.P. khasya Royle;P. insularis Endlicher); Six trees of Assam provenance grown in Zambia

Summary The variation of six wood properties was studied within and between six trees ofPinus kesiya Royle ex Gordon (syn.P. khasya Royle;P. insularis Endlicher) grown in Zambia from seed of Assam provenance and exhibiting 24 annual rings at 5 ft. above ground. There were no important variations in latewood width (mean 0.8 mm) or grain angle (-1.7°). Total ring width (5.2 mm), latewood percentage (19.5%), tracheid length (4.8 mm) and density (0.50 g/cm³) exhibited systematic patterns of variation within trees that could be related to ring number and height by quadratic polynomials, which explained 70 to 90% of the variation. The most important source of random variation was the difference between individual trees and it is recommended that for plantation surveys many trees should be sampled by 3 to 4 annual rings on two radii at breast height.The wood samples were kindly supplied by the Zambia Forest Research Division. Laboratory work was undertaken at the Tree Improvement Research Centre, Agricultural Research Council of Zambia, P. O. Box 1210, Kitwe, Zambia. The authors wish to acknowledge the laboratory assistance of MissP. Waters, Mrs.G. A. R. Howell and Mr.J. F. Morgan. Data was processed on the IBM 360 computer of the Anglo-American Corporation, Kitwe, and on the KDF 9 computer of the Oxford University Computing Laboratory.     

Variation in wood properties of Pinus kesiya Royle ex Gordon (syn. P. khasya Royle; P. insularis Endlicher); Eighteen trees of Burma provenance grown in Zambia

Summary The variation of six wood properties was studied within and between eighteen trees of Pinus kesiya Royle ex Gordon (syn. P. khasya Royle; P. insularis Endlicher) grown in Zambia from seed of Burma provenance and exhibiting 16 annual rings at 5 ft. above ground. Three trees represented each of two size classes in each of three thinning treatments. Thinning effects were poorly estimated but heavy thinning increased ring width, decreased latewood percentage and caused marginal decreases in tracheid length and density. The two tree classes differed in ring width characteristics. Individual trees varied particularly in density; significant height effects were detected for tracheid length and density. Latewood width (mean 0.9 mm) and grain angle (-1.2°) varied little but total ring width (5.8 mm), latewood percentage (19.6%), tracheid length (4.6 mm) and density (0.46 g/cm³) exhibited systematic patterns of variation within trees; quadratic polynomials including ring number and height as independent variables explained 80 to 90% of the variation. Radial differences were often statistically significant but practically unimportant. For plantation surveys many trees should be sampled by 3–4 annual rings on two radii at breast height.Wood samples were supplied by the Zambian Forest Research Division. Laboratory work was undertaken at the Tree Improvement Research Centre, Agricultural Research Council of Zambia, P. O. Box 1210, Kitwe, Zambia. The author acknowledges the laboratory assistance of Miss P. Waters, Mr. J. Mweetwa, Mr. F. Mulimbwa and Mr. N. Phiri. Data were processed on the IBM 360 computer of the Anglo-American Corporation, Kitwe, and on the KDF 9 computer of the Oxford University Comuting Laboratory; Mr. I. A. andrew, Mr. P. G. Adlard and Mrs. T. Posner assisted at various stages.     

Effects of radial growth rate on selected indices for juvenile and mature wood of the Japanese larch

To examine the differences between juvenile and mature wood, 12 aged sample trees from two areas of Nagano Prefecture were harvested; and the radial development of tracheid length, the ring density, and the relation of the radial growth rate (observed by ring width) with some selected indices of ring structure were investigated. The results proved that the radial variation of tracheid length with ring number can be described by a logarithmic formula, and both plantations reached the demarcation of juvenile and mature wood at age 18. With the segmented regression method, we also analyzed radial variation of mean density and found that the demarcation of juvenile and mature wood was at age 15 for sample trees from Saku and at age 21 for those from Yabuhara. By using the results of estimates from juvenile and mature wood based on ring density, we found that high growth rates resulted when producing lower-density wood during the juvenile period, but these rates did not occur during the mature period. The basic reason for this phenomenon is the variation in patterns of earlywood and latewood in juvenile and mature wood, respectively. This result advised us that when managing plantations of Japanese larch it is necessary to take different measurements at different growth periods.     

Inter-tree and intra-tree variation in the physical properties of wood of laurel (<Emphasis Type="Italic">Laurus nobilis</Emphasis>)

The laurel (Laurus nobilis L.) is a common species in southern Europe, but the properties of its wood are not well described in the literature and from that perspective any novel information is valuable. Because of that, a group of laurels was felled for the analysis of wood properties on small defect-free specimens (17 trees and 1250 valid specimens). The sampled wood was moderately heavy and unstable. The following mean values were obtained (density at 12% moisture content 699 kg m^?3; basic density 566 kg m^?3; total volumetric shrinkage 18.0%; volumetric shrinkage coefficient 0.59%). Highly significant inter-tree and intra-tree variation was observed for most of the properties considered. The inter-tree variation was attributed to tree dimensions, being remarkable that volumetric, radial and tangential shrinkage coefficients were significantly related to breast height diameter and slenderness. The trends of these variables suggest that in trees older than those used in the study (24–41 years old) the dimensional stability would increase. As regards the inter-tree variation, a low but highly significant decrease was found for density at highest positions in the tree. Volumetric and linear shrinkage diminish very significantly along the stem. Due to the uniformity of density and the increment of wood dimensional stability along the trunk, the harvesting of the full stem is advisable.     

Characterization of Douglas-fir grown in Portugal: heartwood,sapwood, bark,ring width and taper

Douglas-fir (Pseudotsuga menziesii) is one of the best timber conifers providing long sawnwood components. Original from North America, it has been planted in Europe on approximately 550 thousand ha. Twenty Douglas-fir trees growing in two sites in Portugal were studied regarding ring analysis, heartwood, sapwood and bark development, and taper. The radial growth rate was 7.1 and 6.6 mm year⁻¹ at stem base for 45- and 50-year-old trees, respectively, in the two sites. Initial growth rate was slower, increasing until about 20 years and decreasing afterwards. Heartwood proportion represented on average 49% of the cross section in the lower part of the stem and decreased upwards. Heartwood formation was estimated to start at a cambial age of 8–9 years and increasing by 0.7–0.9 rings year⁻¹. Sapwood width was on average 75 mm at stem base, decreasing upwards. Bark was 26–27 mm thick at stem base, where it represented 15% of the cross-sectional area and decreased to 3–5 mm at the top. Stemwood and heartwood tapers were on average 15 mm m⁻¹ in the lower stem part and 21 and 18 mm m⁻¹, respectively, in the upper part. Douglas-fir showed a good potential for the mountain areas of Portugal, and under the silvicultural conditions of both stands the trees presented ring homogeneity, small conicity and low taper suitable for long wood components.

     

Coastal and interior Douglas-fir provenances differ in growth performance and response to drought episodes at adult age

Context

Since the 2003 drought and heat wave, Douglas-fir dieback has been reported in France in trees older than 30 years. Consequently, it is questioned whether selected Douglas-fir provenances are suited to the frequent and severe drought events which are forecast due to climate change.

Aims

Our objective was to contribute to the screening of variability in productivity and growth response to soil-water deficit of mature trees from provenances not currently used for plantation in France.

Methods

We sampled 22 provenances, including coastal and interior Douglas-fir, covering a wide part of its natural distribution, from Oregon to California for coastal provenances and from British Columbia to New Mexico for interior provenances. These provenances were planted at the mid 1970s in two provenance trials located in the south-west area of France. Variability of productivity, of wood density, and of radial growth in response to drought episodes among provenances was quantified and related to soil-water deficit computed by daily water balance calculations.

Results

Whatever the provenance, annual radial growth is highly dependent on local soil-water deficit (Felines R ² = 0.57, Le Treps R² = 0.49). Radial growth and wood properties exhibit large differences between provenances at 30 years old. Variability between provenances for all wood characteristics studied is mainly structured geographically. Coastal provenances perform best for productivity at 30 years old (619 cm²?±?59), and exhibit a small growth reduction in 2004, the second successive year of drought (?10.7 %?±?3.8). Surprisingly, the southern interior provenances from the driest environments in the natural range show a large growth reduction in 2004 (?30.5 %?±?5.2).

Conclusions

The provenances tested exhibited significant differences in growth performance and growth reduction induced by the soil-water deficit. The approach coupling retrospective analysis of radial growth on mature trees and water balance modelling is relevant for evaluating provenance adaptation to more frequent or severe drought episodes.