Effects of Broiler Litter Management Practices on Phosphorus,Copper, Zinc,Manganese, and Arsenic Concentrations in Maryland Coastal Plain Soils

Abstract

The objective of this research was to assess the long‐term effects of broiler litter applications on soil phosphorus (P), copper (Cu), zinc (Zn), manganese (Mn), and arsenic (As) concentrations in Chesapeake Bay watershed Coastal Plain soils. Litter and soil samples were collected from 10 farms with more than 40 years of broiler production and from wooded sites adjacent to fields and were analyzed for P and metal contents. Averaged over farms, total P and metal concentrations in the litter were 12.8 g kg^?1 P and 332, 350, 334, and 2.93 mg kg^?1 Cu, Zn, Mn, and As, respectively. Surface (0–15 cm) soil pH values were greater than (5.7–6.4) the 0‐ to 15‐cm depth at wooded sites (3.5–4.3). Surface soil Bray 1 P values (149–796 mg kg^?1) in amended fields were greater than wooded sites (4.4–17 mg kg^?1). The 1N nitric acid (HNO₃)–extractable metal concentrations were higher in amended soils than in wooded areas and were 7.7–32, 5.7–26, 12.3–71, and 0.6–3.0 mg kg^?1 for Cu, Zn, Mn, and As, respectively, compared to 0.76–14, 4.6–22, 1.6–70, and 0.14–0.59 mg kg^?1 for the same metals, respectively, in wooded areas. Results from this study demonstrated that long‐term broiler litter applications have altered the chemical properties of the Coastal Plain soils of the Maryland Eastern Shore. Metal concentrations were low in the surface layer of amended fields and typically decreased with depth. Phosphorus additions rather than metals are most likely to contribute to the degradation of the Chesapeake Bay watershed.     

Multiple element concentration in the grain of spring barley (Hordeum vulgare L.) collection

Multiple element analyses were carried out to investigate variation in element concentrations in barley grains of 336 genotypes. Of 13 elements analyzed, Ba ranged from 0.2 to 8.9?mg kg^?1, Ca from 186.4 to 977.5?mg kg^?1, Cu from 1.5 to 9.8?mg kg^?1, K from 353.2 to 7721.5?mg kg^?1, Mg from 1049.8 to 2024.2?mg kg^?1, Mn from 8.1 to 22.9?mg kg^?1, Na from 55.9 to 627.9?mg kg^?1, P from 2272.9 to 5428.8?mg kg^?1, S from 880.7 to 1898.0?mg kg^?1, Si from 19.1 to 663.2?mg kg^?1, and Sr from 0.35 to 2.62?mg kg^?1 in the barley grain. The least square means showed high Zn, Fe, Mg, P, and S concentration in AM-64 and AM-228 genotypes. The principal component analysis of element concentration showed four PCs explained 64.3% total variance. Strong positive correlations (p?<?0.001) of Fe-Mn, Fe-S, S-Mn, Zn-P, Zn-Mg, Mg-P, Mg-Mn, and Ca-Sr were found. The identification barley genotypes that showed high elements concentration furnish valuable genetic resources for biofortification in future.     

Effect of soil application of nickel on growth,micronutrient concentration and uptake in barley (Hordeum vulgare L.) grown in Inceptisols of Varanasi

A pot experiment was conducted in a glass house on low nickel containing alluvial soil in the Department of Soil Science and Agricultural Chemistry, Institute of Agricultural Sciences, Banaras Hindu University, Varanasi, during 2012–13 and 2013–14, to study the response of barley to soil application of nickel (Ni). There were ten treatments of Ni (0, 2.5, 5, 10, 15, 20, 30, 40, 50 and 60 mg kg^?1) studied with recommended dose of fertilizers nitrogen, phosphorus, potassium and sulfur (N:P:K:S :: 40:30:30:20 mg kg^?1).The results showed a significant increase in plant height, number of tillers, chlorophyll content, straw and grain yield, and 1,000 grains weight with application of 10 mg Ni kg^?1 soil during both years of study. The micronutrient concentration and uptake in straw and grain increased with application of <15 mg Ni kg^?1 soil and beyond that declined significantly. Diethylenetriaminepentaacetic acid-extractable micronutrient iron, manganese, copper, zinc and nickel (Fe, Mn, Cu, Zn and Ni) content in soil increased with increasing level of Ni. The maximum urease activity in post-harvest soil was noticed with application of 40 mg Ni kg^?1 soil. The microbial population viz. bacteria, fungi and actinomycetes were higher with 5, 30 and 10 mg Ni kg^?1 soil, respectively.     

DIAGNOSIS AND RECOMMENDATION INTEGRATED SYSTEM (DRIS) FOR EVALUATING NUTRIENT STATUS OF COTTON (GOSSIPIUM HIRSUTUM)

Diagnosis and Recommendation Integrated System (DRIS) approach was employed to monitor the nutrient status of cotton (Gossipium hirsutum) in southwestern districts of Punjab, North-West India. DRIS norms for macro, secondary and micro nutrients in cotton plant are developed. Considering these DRIS norms, the most limiting nutrient for cotton plant in the region is identified along with the order in which the other nutrients become limiting. The DRIS approach indicated that 11, 3, 8, 5, 2, 4, 2, 3, 6 and 2 percent of the total cotton leaf samples collected were low in nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), sulfur (S), iron (Fe), manganese (Mn), zinc (Zn), and copper (Cu), respectively. Leaf tissues of cotton plant were also found to contain high to excessive content of N, P, K, Ca, Mg, S, Fe, Mn Zn and Cu in 11, 7, 15, 19, 25, 18, 66, 33, 9 and 25 percent samples, respectively. DRIS derived sufficiency concentration ranges obtained from survey of cotton fields in this region were 2.22 to 5.20% N, 0.20 to 0.47% P, 1.05 to 2.14% K, 1.66 to 2.86% Ca, 0.34 to 0.57% Mg, 0.65 to 1.11% S, 106 to 172 mg kg^?1 Fe, 35 to 68 mg kg^?1 Mn, 18 to 33 mg kg^?1 Zn, and 5 to 8 mg kg^?1 Cu. The results elucidate that DRIS technique can be used for macro, secondary and micro nutrients indexing of cotton crop irrespective of its cultivar.     

Agronomic Efficiency of Feldspar,Quartz Silica,and Zeolite as Silicon (Si) Fertilizers in Sandy Soil

ABSTRACT

Partial replacement of synthetic chemical fertilizers by naturally occurring alternatives is environmentally recommended. Feldspars (F), quartz silica (S), and zeolites (Z) are silicon (Si)-rich minerals that may be utilized as Si fertilizers. This study aims to assess the agronomic efficiency (AE) of the mentioned minerals as Si fertilizers and to estimate Si-use efficiency (Si-UE) in sandy soil. A field experiment was carried out (summer seasons of 2016 and 2017) in which F, S, and Z were mixed with surface soil in an application rate 500 mg kg^?1 soil with and without potassium humate (K-H, 2 mg kg^?1 soil). Treatments were distributed in a complete randomized block design (CRBD) with three replicates including control before cultivation of soybean (Glycine max L.). Yield (kg ha^?1) of soybean, available Si (mg kg^?1) in soil and uptake (mg kg^?1) of N, P, K, Cu, Fe, Mn, Zn, and Si by soybean seeds and straw were estimated. The most significant increase was by 67.87% followed by 38.69% was recorded for the S and S K-H treatments, compared to the control. Same treatments showed nonsignificant decrease in the available Si (mg kg^?1) that may refer to partial replenishment of plant available Si (PAS) in soil and avoid significant deficiency. Silica treatments resulted in the most significant increase in the uptake (mg kg^?1 soil) of Si, N, P, K, Cu, Fe, Mn, and Zn by seeds and almost by straw. Silica was more efficient agronomically than feldspar and zeolite. Absorption of more biocompatible Si-organo species may depend on Si source.     

Effect of cadmium toxicity on micronutrient concentration,uptake and partitioning in seven rice cultivars

Heavy metal uptake, translocation and partitioning differ greatly among plant cultivars and plant parts. A pot experiment was conducted to determine the effect of cadmium (Cd) levels (0, 45 and 90 mg kg^?1 soil) on dry matter yield, and concentration, uptake and translocation of Cd, Fe, Zn, Mn and Cu in seven rice cultivars. Application of 45 mg Cd kg^?1 soil decreased root and shoot dry weight. On average, shoot and root Cd concentrations and uptake increased in all cultivars, but micronutrients uptake decreased following the application of 45 mg Cd kg^?1. No significant differences were observed between 45 and 90 mg kg^?1 Cd levels. On average, Cd treatments resulted in a decrease in Zn, Fe and Mn concentrations in shoots and Zn, Cu and Mn concentrations in roots. Differences were observed in Cd and micronutrient concentrations and uptake among rice cultivars. Translocation factor, defined as the shoot/root concentration ratio indicated that Cu and Fe contents in roots were higher than in shoots. The Mn concentration was much higher in shoots. Zinc concentrations were almost similar in the two organs of rice at 0 and 45 mg Cd kg^?1. A higher Cd level, however, led to a decrease in the Zn concentration in shoots.     

Requirement of Micronutrients by Lowland Rice

Lowland or flooded rice is mainly responsible for about 76% of total rice production at global level, yet information on micronutrient requirements for this crop is limited. Six greenhouse experiments were conducted at the National Rice and Bean Research Center of EMBRAPA, Santo Antônio de Goiás, Brazil, to determine requirements of zinc (Zn), copper (Cu), boron (B), molybdenum (Mo), manganese (Mn), and iron (Fe) for lowland rice grown on a Brazilian Inceptisol. The levels of micronutrients used were Zn (0, 10 20, 40, and 80 mg kg^?1), Cu (0, 5, 10, 20, and 40 mg kg^?1), B (0, 5, 10, 20, and 40 mg kg^?1), Mo (0, 2, 4, 8, and 16 mg kg^?1), Mn (0, 50, 100, 300, and 600 mg kg^?1), and Fe (0, 250, 500, 1000, and 2000 mg kg^?1). Grain yield was significantly increased in a quadratic fashion with the addition of Zn, Cu, B, Mo, Mn, and Fe. The adequate rates of micronutrients for maximum grain yield were Zn 33 mg kg^?1, Cu 25 mg kg^?1, B 26 mg kg^?1, Mo 10 mg kg^?1, Mn 250 mg kg^?1, and Fe 1269 mg kg^?1. In addition to grain yield, plant height, straw yield, panicle density, and root growth of lowland rice were also improved with the addition of most of these micronutrients. Improvement in root growth has special significance in improving nutrient-use efficiency under nutrient-stress conditions. Micronutrient-use efficiency (grain yield per unit nutrient applied) was in the order of Cu > Zn > Mn > Fe > Mo > B.     

VARIATION AND INTERRELATIONS AMONG NUTRIENT ELEMENTS IN WHEAT LEAVES USED FOR FORAGE

Dual purpose wheat provides valuable forage resources for cattle in the southern Great Plains during winter. In this study, 96 recombinant inbred lines (RILs) were analyzed for variation in concentrations of 11 mineral elements in leaves. The mean concentration was 133.4 mg kg^?1 for manganese (Mn) and 293 mg kg^?1 for iron (Fe), being much higher than the 30 mg kg ^?1 recommended for each of these two minor mineral elements. Mean concentrations of zinc (Zn) (24.1 mg kg^?1) and copper (Cu) (4.4 mg kg^?1) were much lower than recommended concentrations. A highly significant correlation was detected between major minerals, magnesium (Mg) and calcium (Ca) (r = 0.9272**) and between minor minerals, Fe and nickel (Ni) (r = 0.8905**). Copper had no significant correlation with any minerals except Zn (r = 0.2529*), whereas Zn had significant correlations with all of the tested minerals except Cu, Mn, and Ni. The interrelations between different minerals provided information for effective selection strategy for ideal mineral concentrations in breeding of dual purpose wheat.     

Copper induced iron deficiency in wheat (Triticum aestivum L)

Abstract

A pot experiment was conducted to study the interaction effects of phosphorus and copper on wheat. The soils used were calcareous loamy sand (ls) and non calcareous sandy loam (sl). Four levels of Cu (0, 5, 10 and 20?mg Cu kg^?1 soil) and six levels of P (0, 25, 50, 100, 200 and 400?mg P kg^?1 soil) were applied in all possible combinations with three replications. Soil pH decreased with Cu application while Olsen P increased with P application in both soils. Growth and yield of wheat improved significantly with graded levels of applied P. However, when any level of P was combined with 20?mg Cu kg^?1 soil, severe iron chlorosis of leaves, a drastic reduction in growth and chlorophyll content was observed in calcareous ls only. The results indicated that it was Cu and not P that induced Fe deficiency in wheat grown in alkaline calcareous soil and the Cu requirement of the crop seemed to be much lower in the calcareous ls. Root dry matter, grain and straw yield decreased with increasing levels of applied Cu in ls but in sl maximum increase of 62.5, 74.3 and 63.7 per cent in root, grain and straw yield was observed with a combined application of 400?mg P and 5?mg Cu kg^?1 soil over control. Accumulation of Cu in roots decreased the Fe absorption by roots which indicated that Fe chlorosis of wheat leaves is expected when Cu: Fe concentration ratio in root is > 0.30.     

Optimization of portable X-ray fluorescence spectrometry for the assessment of soil total copper concentrations: application at an ancient smelting site

Purpose

Copper (Cu) is the earliest anthropogenic metal pollutant, but knowledge of Cu soil concentrations at ancient metalworking sites is limited. The objective of this work was to examine the ability of portable X-ray fluorescence to quantify Cu in soils at such sites.

Materials and methods

Using a Bruker Tracer III-SD pXRF, we examine factory “scan” settings versus simple instrument parameter changes (a reduction in energy settings from 40 to 12 kV) to target analysis for Cu. We apply these to a set of uncontaminated samples (n?=?18, <?92 mg Cu kg^?1) from Central Thailand and compare results to standard wet chemistry analysis (aqua regia digestion and ICP-OES analysis). We then apply the optimized method to a set of highly contaminated samples (n?=?86, <?14,200 mg Cu kg^?1) from a known ancient smelting site.

Results and discussion

We demonstrate that simple changes to factory recommended “scan” settings can double the sensitivity of Cu determination via pXRF (“optimized limit of determination” of 19.3 mg kg^?1 versus an initial value of 39.4 mg kg^?1) and dramatically improve the accuracy of analysis. Changes to other results for other elements are variable and depend on concentration ranges, soil matrix effects, and pXRF response for the individual element. We demonstrate that pXRF can accurately determine Cu across a wide concentration range and identify grossly contaminated soil samples.

Conclusions

We conclude that pXRF is a useful tool to rapidly screen and analyse samples at remote sites and can be applied to ancient metalworking sites. Simple optimization of the pXRF settings greatly improves accuracy and is essential in determining comparative background concentrations and “unaffected” areas. Application to other elements requires further element and matrix specific optimization.

     

Trace Element Concentrations in Saltmarsh Soils Strongly Affected by Wastes from Metal Sulphide Mining Areas

Soil and water samples were analysed for trace metals and As in two watercourses and 14 sampling plots in a salt marsh polluted by mine wastes in SE Spain. Groundwater levels, soil pH and Eh were measured ‘in situ’ for a 12-month period in each sampling plot, and total calcium carbonate was also determined. Low concentrations of soluble metals (maximum Mn 1.089 mg L^?1 and maximum Zn 0.553 mg L^?1) were found in the watercourses. However, total metal contents were extremely high in the soils of a zone of the salt marsh (maximum 1,933 mg kg^?1 of Mn, 62,280 mg kg^?1 of Zn, 16,845 mg kg^?1 of Pb, 77 mg kg^?1 of Cd, 418 mg kg^?1 of Cu and 725 mg kg^?1 of As), and soluble metals in the pore water reached 38.7 mg L^?1 for Zn, 3.15 mg L^?1 for Pb, 48.0 mg L^?1 for Mn, 0.61 mg L^?1 for Cd and 0.29 mg L^?1 for As. Variable concentrations with depth indicate a possible re-mobilisation of the metals, which could be related to spatial and temporal variations of water table level, pH and Eh and to the presence of calcium carbonate. A tendency for the Eh to decrease in the warmest months and to increase in the coldest ones was found, especially, in plots that received water with a high content of dissolved organic carbon. Hence, the existence of nutrient effluent-enriched water may modify the physical–chemical conditions of the soil–water system and influence metal mobility.     

Manganese foliar supplementation impacts rice yield in tropical lowlands

Abstract

The aim of this work was to evaluate manganese (Mn) sources and levels effects in irrigated rice production in central Brasil (tropical lowlands of Tocantins state). The experiment was conducted in a 5x5?+?1 factorial scheme, five Mn sources and five levels (0.5; 1.0; 1.5; 2.0; and 2.5?kg ha^?1), applied in induction of tillering of rice plants, plus a control without treatment, and Mn content in leaves (mg kg^?1), number of panicles per area (m²), hundred grains weight (g), intact grains (%), and grain yield (kg ha^?1) were analyzed. Treatments with Mn-carbonate source got the best results and this source at the level of 1.5?kg ha^?1 provided the highest yield: 7,375?kg ha^?1. Higher values were obtained with the application of 1.0 to 1.5?kg ha^?1 of Mn, except for the intact grains where the best means were obtained at 2.5?kg ha^?1.     

Copper Tolerance and Accumulation of Elsholtzia splendens Nakai in a Pot Environment

ABSTRACT

Elsholtzia splendens Naki has been identified as a copper (Cu) geobotanical indicator. In this study, the effects of Cu supply levels (control, 100, 200, 400, 600, 800, 1000, 1200 mg kg¹) on the growth and Cu accumulation in E. splendens were studied in one pot experiment. The results showed that no reduction in shoot height and dry weight was noted when the plants were grown at Cu supply levels up to 1000 mg kg^?1 in soil. Slight stimulation on shoot growth was noted at Cu levels ≥ 100 mg kg^?1. Copper concentration in shoots and roots increased with increasing Cu levels, and reached a maximum of 1751 and 9.45 mg kg^?1 (DW) at 1200 mg Cu kg^?1. The amount of Cu accumulated in the roots and shoots were 313 and 22 μ g plant^?1 at external Cu levels of 1000 and 800 mg kg^?1, respectively. The shoot/root Cu ratios ranged from 0.005 to 0.008 and more than 92% of the total Cu taken up by E. splendens was accumulated in roots. Furthermore, Cu concentrations in roots and shoots were significant and positively correlated with total soil Cu, water, ammonium nitrate (NH₄NO₃), ammonium (NH₄)-acetate, and ethylenediaminetetraacetic acid (EDTA) extractable Cu. These results indicate that E. splendens can considered as a Cu tolerant and accumulated plant, and root is the major part for accumulation of Cu in E. splendens.     

Suitability of Urban Wastes for Crop Production in Zaria,Northern Nigeria: Bioavailability,Phytotoxicity, and Fractions of Micronutrients

The suitability of two composted solid urban wastes for crop production was evaluated in a pot experiment with sorghum (Sorghum bicolor) that focused on the geochemical fractions, bioavailability, and phytotoxicity of copper (Cu), manganese (Mn), and zinc (Zn). Total concentrations of Cu, Mn, and Zn in soil increased with increasing waste application, ranging from 1.6 to 48.2 mg kg^?1 for Cu, 84 to 474 mg kg^?1 for Mn, and 13.8 to 597 mg kg^?1 for Zn. Waste application significantly increased pH and electrical conductivity (EC) of the soil. Copper, Mn, and Zn in the waste-amended soil were speciated into mobile (F1), easily mobilizable (F2), occluded in Mn oxides (F3), organically bound (F4), occluded in amorphous Fe oxides (F5), occluded in crystalline Fe oxides (F6), and residual (F7) fractions to assess the lability of the metals. On the average, the F4 was the most dominant Cu and Zn fraction, accounting for between 37 and 60% of total Cu and from 14 to 40% of total Zn concentrations, whereas F3 was the dominant Mn fraction closely followed by F4. The concentrations of Cu, Mn, and Zn in sorghum dry matter (DM) decreased with increasing waste application, probably induced by osmotic stress and ionic toxicity. Tissue Zn (Y-Zn) and Mn (Y-Mn) correlated significantly with the F1 and F2 fractions, but pH was an overriding factor in predicting Cu and Zn bioconcentration. Used as soil amendments, the application rate for these Zaria urban wastes should be limited to ≤10% (w/w basis), as Zn in the sorghum tissue reached the toxic limit just from one application of the waste to soil.     

EFFECT OF LANTHANUM ON RICE PRODUCTION,NUTRIENT UPTAKE,AND DISTRIBUTION

ABSTRACT

Split root solution culture experiments were conducted to study the effects of the rare earth element lanthanum (La) on rice (Oryza sativa) growth, nutrient uptake and distribution. Results showed that low concentrations of La could promote rice growth including yield (0.05 mg L^?1 to 1.5 mg L^?1), dry root weight (0.05 mg L^?1 to 0.75 mg L^?1) and grain numbers (0.05 mg L^?1 to 6 mg L^?1). High concentrations depressed grain formation (9 mg L^?1 to 30 mg L^?1) and root elongation (1.5 mg L^?1 to 30 mg L^?1). No significant influence on straw dry weight was found over the whole concentration range except for the 0.05 mg L^?1 treatment. In the pot and field experiments, the addition of La had no significant influence on rice growth.Lanthanum had variable influence on nutrient uptake in different parts of rice. Low concentrations (0.05 mg L^?1 to 0.75 mg L^?1) increased the root copper (Cu), iron (Fe), and magnesium (Mg), and grain Cu, calcium (Ca), phosphorus (P), manganese (Mn), and Mg uptake. High concentrations (9 to 30 mg L^?1) decreased the grain Ca, zinc (Zn), P, Mn, Fe and Mg, and straw Ca, Mn, and Mg uptake. With increasing La concentration, root Zn, P, Mn, Cu, and Ca concentrations increased, and grain Ca and Fe, and straw Mn, Mg, and Ca concentrations decreased. Possible reasons are discussed for the differences between the effects of La in nutrient solutions and in pot and field experiments.     

Water extractable concentrations of Fe,Mn, Ni,Co, Mo,Pb and Cd under different land uses of Danube basin in Croatia

Abstract

Water extraction of trace elements can simulate the concentration of elements in the soil solution from where the plant takes up the elements. The objective of this investigation was to determine the water extractable concentration of seven trace elements (Fe, Mn, Ni, Co, Mo, Pb and Cd) and to assess their relationship with soil properties of the Danube basin in Croatia. Soil samples from the surface layer (0–25 cm) of 74 sites, having different land uses (forest and agricultural land), were collected. Samples were analysed for total and water extractable trace elements as well as for pH, DOC, SOC and CEC. The concentrations of water extractable fraction of trace elements were on average: 20.14 mg kg^?1 for Fe, 3.61 mg kg^?1 for Mn, 0.07 mg kg^?1 for Ni, 0.016 mg kg^?1 for Co, 0.01 mg kg^?1 for Mo, 0.01 mg kg^?1 for Pb and 0.0009 mg kg^?1 for Cd. Soil properties were in the following range: pH 4.3–8 (Avg: 6.35), DOC 6.1–73 mg l^?1 (Avg: 26 mg l^?1), CEC 1.3–24 cmol kg^?1 (Avg: 9 cmol kg^?1) and SOC 0.5–5% (Avg: 1.7%). The concentration of water extractable fraction of trace elements was significantly correlated with pH (p <0.001), DOC (p <0.001 – p <0.05) and CEC (p <0.001) but their relationship with total content of trace element and SOC was rather weak, suggesting that total metal alone cannot be an indicator of toxicity or deficiency. Results show that pH, DOC and CEC are important soil quality parameters taking part in the solubility control of trace metals in the soil rather than their total concentration. The difference between land uses has been observed as well, suggesting that a change in land use can cause a change in trace element solubility.     

Microbial Biomass and Tolerance of Microbial Community on an Aged Heavy Metal Polluted Floodplain in Japan

The objective of the present study was to increase understanding of the effects of heavy metal pollution and soil properties on microorganisms in relation to the biomass and microbial functional community. Soil samples were collected from aged polluted and reference sites on a floodplain. The soil Cu, Zn and Pb total concentrations were much higher at the polluted sites (average 231.6–309.9 mg kg^?1, 195.7–233.0 mg kg^?1, and 72.4–86.0 mg kg^?1, respectively) than at the reference site (average 33.3–44.0 mg kg^?1, 76.7–98.0 mg kg^?1, and 30.8–41.6 mg kg^?1, respectively), while the available heavy metal concentrations in CaCl₂ extraction were similar in all sites. Small seasonal variations in the size of microbial biomass were observed. Ambient soil properties (e.g. total C, N, pH, moisture content, and CEC) affected the soil microbial biomass more than the heavy metal pollution. However, the aged pollution tended to impact on the composition of the microbial community. PICT (pollution-induced community tolerance) test using BIOLOG Ecoplates showed enhanced tolerance of the microbial community to Cu stress in the polluted site. In non polluted but low nutrient, low pH and low moisture soil, the microbial biomass was lower and the microbial community was more vulnerable to Cu stress. In spite of the low heavy metal availability due to ageing, the BIOLOG technique provided sensitive detection of microbial community level changes in PICT analysis.     

Initial results from long-term field studies at three sites on the effects of heavy metal-amended liquid sludges on soil microbial activity

In a long‐term study of the effects on soil fertility and microbial activity of heavy metals contained in sewage sludges, metal‐amended liquid sludges each with elevated Zn, Cu or Cd concentrations were applied over a 3‐year period (1995–1997) to three sites in England. The experiments were sited adjacent to experimental plots receiving metal‐rich sludge cakes enabling comparisons to be made between the effects of heavy metal additions in metal‐amended liquid sludges and sludge cakes. The liquid sludge additions were regarded as ‘worst case’ treatments in terms of likely metal availability, akin to a long‐term situation following sewage sludge additions where organic matter levels had declined and stabilised. The aim was to establish individual Zn (50–425 mg kg^?1), Cu (15–195 mg kg^?1) and Cd (0.3–4.0 mg kg^?1) metal dose–response treatments at each site, but with significantly smaller levels of organic matter addition than the corresponding sludge cake experiments. There were no differences (P > 0.05) in soil respiration rates, biomass carbon concentrations or most probable numbers of clover Rhizobium between the treatments at any of the sites at the end of the liquid sludge application programme. Soil heavy metal extractability differed between the metal‐amended liquid sludge and metal‐rich sludge cake treatments; Zn and Cd extractabilities were higher from the liquid sludge additions, whereas Cu extractability was higher from the sludge cake application. These differences in metal extractability in the treated soil samples reflected the contrasting NH₄NO₃ extractable metal contents of the metal‐amended liquid sludges and sludge cakes that were originally applied.     

Residual heavy metal (Cu and Cd) removal byIris Pseudacorus

The uptake of Cu and Cd by the roots ofIris pseudacorus and its transport to rhizome and leaves were examined using solutions containing 0.5 and 5.0 mg L^?1 of Cu and Cd. Heavy metal accumulation was measured while replacing the metal absorbed by the plants with daily introduction to restore the initial concentrations. The heavy metal accumulation by Iris p. was 1.01 g Cu and 0.69 g Cd kg^?1 of fresh plant at the end of the tests for the solutions of 5.0 mg L^?1 metal concentration, respectively.     

Diagnosis of Micronutrient Imbalance in Lime Crop in Semi-arid Region of Rajasthan,India

Low and unstable fruit yield, poor quality of fruits, and excessive fruit dropping are major problems in a lime crop and are due to either micronutrient deficiencies or nutrient imbalance. A study was conducted to assess the micronutrient status in a lime orchard at the Central Soil and Water Conservation Research and Training Institute (CSWCRTI)’s research farm in Kota, Rajasthan, India. Plant and soil samples were collected during September and October in 2006–2007. The micronutrients extracted with diethylenetriaminepentaacetic acid (DTPA) in soils were in the order of manganese (Mn) > iron (Fe) > zinc (Zn) > copper (Cu). The mean values of DTPA Mn, Fe, Zn, and Cu in surface soils varied from 13.98 to 22.70, 2.48 to 8.66, 0.79 to 1.19, and 0.14 to 0.46 mg kg^?1, respectively, whereas in subsurface soils they varied from 12.94 to 23.06, 4.84 to 6.52, 0.51 to 0.83, and 0.07 to 0.20 mg kg^?1, respectively. Results reveal that except for Fe, the other DTPA-extractable micronutrients decreased with depth. Total Mn, Fe, Zn, and Cu in plant leaves varied from 22 to 83, 70 to 630, 40 to 932, and 37 to 3057 mg kg^?1, respectively, indicating greater or toxic concentrations of total micronutrient in leaf samples. Total Mn, Fe, Zn, and Cu in petiole samples varied from 7 to 60, 235 to 574, 70 to 827, and 101 to 2623 mg kg^?1, respectively. High concentration of Cu and Zn in leaves resulted in Fe and Mn deficiencies (exhibited as leaf chlorosis) in lime plants. Results of the study indicated that Fe and Mn deficiencies are major disorders in lime plantation. Similarly, the measure of DTPA-extractable micronutrients showed the low statuses of Fe and Cu and marginal status of Zn in soils along the Chambal region.