Effects of TiO<Subscript>2</Subscript> Nanoparticles on the Neotropical Cladoceran <Emphasis Type="Italic">Ceriodaphnia silvestrii</Emphasis> by Waterborne and Dietary Routes

The impact of nanoparticles (NPs) in zooplankton is poorly studied, particularly when organisms are exposed through diet. Food, constituted mainly by unicellular algae, can act as an important route of contamination for zooplankton. Since unicellular algae have a high surface area in relation to their volume, NPs can interact with their cell membranes and walls, as well as with exopolysaccharides secreted by them. In the present research, we investigated both the acute effects of waterborne titanium dioxide nanoparticles (TiO₂ NPs), and its chronic effects via dietary exposure on the Neotropical freshwater zooplankton Ceriodaphnia silvestrii Daday, 1902 (Crustacea: Cladocera). The observed acute effects served as support for chronic tests, in which we investigated the effects of TiO₂ NPs on survival and life history parameters (body length, numbers of eggs, and neonates produced) of cladoceran adult females, using the freshwater cosmopolitan chlorophycean Raphidocelis subcapitata as source of contamination of TiO₂ NPs for zooplankton. R. subcapitata cells were exposed to concentrations of 0, 0.01, 1, and 10 mg L^?1 of TiO₂ NPs for 96 h, and then provided as food for females of C. silvestrii until the third brood was released. Significant toxic effects were observed in body length and total number of neonates and eggs produced by females of C. silvestrii at concentrations of 1 and 10 mg L^?1 of TiO₂ NPs. Survival was the most sensitive parameter when exposure was given via food. From the concentration of 0.01 mg L^?1 of TiO₂ NPs, there was a decrease in the survival of C. silvestrii females. The quantification of TiO₂ NPs in algae evidenced that they have retained NPs in their cells, being, therefore, an important route of exposure and toxicity of TiO₂ NPs to the studied microcrustacean.     

Accumulation of Cadmium and Antioxidant and Hormonal Responses in the Indian Major Carp <Emphasis Type="Italic">Cirrhinus mrigala</Emphasis> During Acute and Sublethal Exposure

Acute (24 h) and sublethal (35 days) effects of cadmium chloride (CdCl₂) were examined in Cirrhinus mrigala using various endpoints (accumulation pattern, thyroid hormones (THs), and antioxidants). The mean concentrations of CdCl₂ for 24 and 96 h were found to be 35.974 and 22.387 mg L^?l, respectively. LC50 concentration of CdCl₂ for 24 h (35.97 mg L^?l) was used for the acute study. For the sublethal studies, fish were exposed to 3.59 mg L^?1 (Treatment I) and 7.19 mg L^?1 (Treatment II) corresponding to 1/10th and 1/5th of 24 h LC50 of the CdCl₂. During acute exposure, higher accumulation of CdCl₂ was noticed in the gill, liver, and kidney of C. mrigala, which is found in the order gill > liver > kidney tissues. Similarly, in sublethal treatments (Treatment I and II), a concentration and time-dependent increase of CdCl₂ accumulation was noticed in the order of gill > liver > kidney. GSH, GST, and GPx activities were found to be relatively lower from the treated groups in both acute and sublethal treatments. However, LPO activity was significantly increased in CdCl₂-treated fish C. mrigala. Further, plasma T₃ reduction was more pronounced than T₄ in acute study. During sublethal treatments, both T₄ and T₃ levels showed a continuous decrease as the exposure period extended. All the values in this study were statically significant (P < 0.01 and P < 0.05).     

Effect of Cadmium Stress on Growth and Electrical Impedance Spectroscopy Parameters of <Emphasis Type="Italic">Cotinus coggygria</Emphasis> Roots

The use of plants for ecological remediation is an important method of controlling heavy metals in polluted land. Cotinus coggygria is a landscape plant that is used extensively in landscaping and afforestation. In this study, the cadmium tolerance level of C. coggygria was evaluated using electrical impedance spectroscopy (EIS) to lay a theoretical foundation for broad applications of this species in Cd-polluted areas and provide theoretical support to broaden the application range of the EIS technique. Two-year-old potted seedlings of C. coggygria were placed in a greenhouse to analyse the changes in the growth, water content and EIS parameters of the roots following treatment with different Cd concentrations (50, 100, 200, 500, 1000 and 1500 mg kg^?1), and soil without added Cd was used as the control. The roots grew well following Cd treatments of 50 and 100 mg kg^?1. The Cd contents increased with the increase in Cd concentration in the soil. However, the lowest root Cd content was found at 4 months of treatment. The extracellular resistance r_e and the intracellular resistance r_i increased first overall and then decreased with the increasing Cd concentration, and both parameters increased with a longer treatment duration. The water content had a significant negative correlation with the Cd content (P?<?0.01) and the r_e (P?<?0.05). C. coggygria could tolerate a soil Cd concentration of 100 mg kg^?1. There was a turning point in the growth, water content and EIS parameters of the C. coggygria roots when the soil Cd concentration reached 200 mg kg^?1. The root water content and r_e could reflect the level of Cd tolerance in C. coggygria.     

Manganese (II) Removal from Aqueous Solutions by <Emphasis Type="Italic">Bacillus cereus</Emphasis>: an Optimization Study Using Experimental Design and Response Surface Methodology

The present study was carried out in order to investigate the removal of soluble Mn²⁺ from an aqueous solution using Bacillus cereus. A manganese aqueous solution at 50 mg L^?1 was treated, and the product was less than 1 mg L^?1 of residual concentration, which complied with environmental regulations. Before the optimization, B. cereus was able to remove Mn²⁺ ions from an aqueous solution; however, the residual content was around 2.5 mg L^?1. Screening experiments aiming at defining the effects of the growth medium composition indicated that both casamino acid-peptone and yeast extract contributed to manganese removal. These experiments also showed the interaction between these two components of the culture media, nevertheless the use of glucose did not prove significant. Considering these observations, the Doehlert design was used to generate a response surface. The model was significant with the p value lower than 0.05 and the lack-of-fit not significant (p > 0.05). The optimized composition of the growth medium was defined as 0.5 g L^?1 of casamino acid-peptone and 0.25 g L^?1 of yeast extract, whereas glucose could be removed from the original growth medium. When the optimized condition of the growth medium was used, the time required for manganese removal was reduced from 21 to 8 days. After optimization, B. cereus was capable of producing high manganese removal, reducing the residual concentration to levels below 1.0 mg L^?1.     

Photo-Assisted Degradation,Toxicological Assessment,and Modeling Using Artificial Neural Networks of Reactive Gray BF-2R Dye

This work investigates the degradation of Reactive Gray BF-2R dye (a blend of reactive yellow 145, reactive orange 122 and reactive black 5 dyes) using UV/H₂O₂, Fenton, and photo-Fenton-advanced oxidative processes, with artificial sunlight and UV-C radiations. The photo-Fenton process employing UV-C radiation was the most efficient under the conditions studied. The ideal conditions for the degradation of the dye, determined using a factorial design 2³ and a study of the concentration of hydrogen peroxide ([H₂O₂]), were [H₂O₂] equal to 40 mg L^?1, iron concentration [Fe] of 1 mg L^?1, and pH between 3 and 4. The Chan and Chu non-linear kinetic model predicted the kinetic data with a degradation of over 98% for color and 68% for aromatics after 60 min. The behavior of the chemical oxygen demand fitted the first-order kinetic model well, with a degradation of 64% after 60 min. The Multilayer Perceptron 7-11-2 artificial neural network model enabled to model the degradation process of the aromatics and accurately predict the experimental data. Toxicity tests indicated that the post-treatment samples were non-toxic for Escherichia coli bacteria, and Portulaca grandiflora and Basil sabory seeds. However, they inhibited the growth of Lactuca sativa seeds and Salmonella enteritidis bacteria. The photo-Fenton process with UV-C radiation degraded the dye studied efficiently and the degradation percentages were, on average, 7% and 5% higher for color than those observed when employing the Fenton and UV/H₂O₂ processes, respectively. With the aromatic, however, they were 84% and 62% higher, thus justifying the use of this process.     

Chemical Behavior of U(VI) in the Presence of Soil Components

Soil components from different environments (forest (OF), semiarid (SZ), and sand (AS)) were separated from fulvic and humic substances, characterized by DRX, EDS(SEM), and zero-charge points were determined. The sorption of U(VI) by these materials was determined considering contact time, concentration of U(VI), pH, ionic strength, and presence of sodium chloride and humic acids. The time to reach the kinetic sorption equilibrium was ca. 1 min for the components of the SZ and AS soils, whereas those from OF required longer times. The zero-charge points of the materials indicate that in the experimental conditions, the surfaces of the materials are positively charged, as are uranyl ions. The sorption kinetic data were well fitted to the pseudo-second-order model, which indicates chemical sorption. The maximum sorption capacities for U(VI) obtained from data fitted to the Langmuir model of OF and SZ were 49 and 19.8 mg g^?1 respectively. Sorption isotherm data for AS were best fitted to the Freundlich model (q_e?=?5.4 mg g^?1). The maximum values of distribution coefficients (K_d) were 23?±?7 L kg^?1, 545?±?64 L kg^?1, and 1178?±?229 L kg^?1 for AS, SZ, and OF, respectively; these values may depend on pH, contact time, initial concentration of U(VI), and the composition of the materials. Sodium chloride in the aqueous solutions affects U(VI) sorption by the materials SZ and AS. The effect of humic acids depends on pH, only in acid media soluble humate complexes may be formed.     

Assessment of Surface Water Quality in the Big Sunflower River Watershed of Mississippi Delta Using Nonparametric Analysis

Assessment of surface water quality in the Mississippi Delta is essential to quantify the eutrophication of the Gulf of Mexico. This study estimated the characteristics and variations of surface water quality at three study sites in the Big Sunflower River Watershed (BSRW) within the Mississippi Delta using Kruskal-Wallis, Dunn, Mann-Kendall, and Pettitt tests. In general, contents of some water quality constituents such as nitrate-nitrogen (NO₃???N) and total phosphorus (TP) in the BSRW varied from site to site each year, whereas variations of other constituents such as pH and dissolved oxygen (DO) each year were basically not significant. The highest median concentrations were found in spring for NO₃???N and total nitrogen (TN); in summer for specific conductance (SC), Na, and Cl; and in winter for DO. Mann-Kendall trend analysis revealed that there was an increasing annual trend at Leland but a decreasing annual trend at Merigold for NO₃???N concentrations even though such changes were very small, whereas there was no annual trend for TP at any of the three study sites. Pettitt’s test further identified that the NO₃???N concentrations had an abrupt increase in February 2009 at the median value of 0.44 mg L^?1 in Leland and an abrupt decrease in June 2012 at the median value of 3.65 mg L^?1 in Merigold. A very good linear correlation existed between total dissolved solid (TDS) and magnesium (Mg) in the BSRW, which could be used to estimate TDS from Mg concentrations for this watershed when the data for TDS are absent.     

Evaluation of Mercury,Lead, Arsenic,and Cadmium in Some Species of Fish in the Atrato River Delta,Gulf of Urabá, Colombian Caribbean

The concentrations of mercury, lead, cadmium, and arsenic were evaluated in 96 samples, 12 by each one of the following eight fish species: snook (Centropomus undecimalis), crevalle jack (Caranx hippos), Serra Spanish mackerel (Scomberomorus brasiliensis), southern red snapper (Lutjanus purpureus), blue runner (Caranx crysos), Atlantic tarpon (Megalops atlanticus), ladyfish (Elops saurus), and Atlantic goliath grouper (Epinephelus itajara), which were collected during 1 year in the Atrato River Delta in the Gulf of Urabá, Colombian Caribbean. Three fish were caught from each of the following sites the community usually uses to catch them (known as fishing grounds): Bahía Candelaria, Bahía Marirrío, Bocas del Roto, and Bocas del Atrato. The quantification of metals was performed by microwave-induced plasma-optical emission spectrometry. The Pb concentration fluctuated from 0.672 to 3.110 mg kg^?1, surpassing the maximum permissible limit (MPL?=?0.3 mg kg^?1) for human consumption for all species. The Hg concentration ranged between < Limit of detection and 6.303 mg kg^?1, and in the crevalle jack and Atlantic tarpon, concentrations exceeded the MPL (0.5 mg kg^?1). The levels of Cd and As were not significant in the studied species and did not exceed the MPL (0.05 mg kg^?1).     

Effect of Metals on Decolorization of Reactive Blue HERD by <Emphasis Type="Italic">Comamonas</Emphasis> sp. UVS

Comamonas sp. UVS was able to decolorize Reactive Blue HERD (RBHERD) dye (50 mg L^?1) within 6 h under static condition. The maximum dye concentration degraded was 1,200 mg L^?1 within 210 h. A numerical simulation with the model gives an optimal value of 35.71?±?0.696 mg dye g^?1 cell h^?1 for maximum rate (V_max) and 112.35?±?0.34 mg L^?1 for the Michaelis constant (K_m). Comamonas sp. UVS has capability of decolorization of RBHERD in the presence of Mg²⁺, Ca²⁺, Cd²⁺, and Zn²⁺, whereas decolorization was completely inhibited by Cu²⁺. Metal ions also affected the levels of biotransformation enzymes during decolorization of RBHERD. Comamonas sp. UVS was also able to decolorize textile effluent with significant reduction in COD. The biodegradation of RBHERD dye was monitored by UV–vis spectroscopy, FTIR spectroscopy, and HPLC.     

Dominant Characteristics Between <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis> and <Emphasis Type="Italic">Cyclotella</Emphasis> Sp. Accompanying Dilution Process in Eutrophic Lake

Although dilution of lake water has been used for improvement of water quality and algal blooms control, it has not necessarily succeeded to suppress the blooms. We hypothesized that the disappearance of algal blooms by dilution could be explained by flow regime, nutrient concentrations, and their interaction. This study investigated the effects of daily renewal rate (d), nitrogen (N) and phosphorus (P) concentration, and their interaction on the domination between Microcystis aeruginosa and Cyclotella sp. through a monoxenic culture experiment. The simulation model as functions of the N:P mass ratio and dilution rate (D) (calculated from d) was constructed, and the dominant characteristics of both species were predicted based on the model using parameters obtained in a monoculture experiment and our previous study. Results of monoxenic culture experiment revealed that M. aeruginosa dominated in all conditions (d = 5 or 15%; N = 1.0 or 2.5 or 5.0 mg-N L^?1; P = 0.1 or 0.5 mg-P L^?1) and the predicted cell densities were substantially correspondent to experimental data. Under various N:P ratios and D values, characteristics of domination for each species were predicted, indicating that Cyclotella sp. tended to be dominant under high P concentrations (P ≥ 0.36 mg-P L^?1) when the N:P ratio was less than 7.0, and M. aeruginosa could not form algal blooms at the N:P ratio ≤ 7.0 (N ≤ 0.7 mg-N L^?1). It was also suggested that the dilution rate leading to the Cyclotella sp. domination required 0.20 day^?1 or higher regardless of the N:P ratios.

Open image in new window

Graphical Abstract ? M. aeruginosa and Cyclotella sp. could be a superior competitor in nutrient-limited and nutrient-rich conditions, respectively. ? The simulation model in this study indicated that the predicted cell density and nutrient concentration were substantially correspondent to experimental data. ? The model predicted that Cyclotella sp. tended to be dominant at the P ≥ 0.36 mg-P L^?1 when the N:P ratio was less than 7.0, and M. aeruginosa could not form algal blooms at the N:P ratio ≤ 7.0 (N ≤ 0.7 mg-N L^?1).

     

Extraction and speciation analysis of roxarsone and its metabolites from soils with different physicochemical properties

Purpose

The application of roxarsone (ROX), an arsenic-containing compound, as a feed additive in the animal production industry results in elevated soil levels of ROX and its metabolites, namely, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenate (As(V)), and arsenite (As(III)). This study was conducted to study the extraction and speciation analysis of ROX-related arsenicals in soils with different physicochemical properties and the possible effects of soil properties on the extraction of ROX and its metabolites.

Materials and methods

Analytical method based on high-performance liquid chromatography (HPLC)-inductively coupled plasma–mass spectrometry (ICP-MS) was employed to determine the concentrations of As(III), DMA, MMA, As(V), and ROX extracted by different extraction solvents from different soils spiked by arsenicals. Validity of the developed method was assessed by the recovery efficiencies of arsenic species in soil-dissolved matter solutions containing 20 μg As?·?L^?1 of each arsenic species. Effects of soil properties on the extraction of ROX and its metabolites were analyzed by Pearson’s correlation.

Results and discussion

Arsenic species were separated using gradient elution of water and 20 mmol?·?L^?1 (NH₄)₂HPO₄ + 20 mmol?·?L^?1 NH₄NO₃ + 5 % methanol (v/v) within 27 min. The linear ranges of all arsenicals were 0–200 μg As?·?L^?1 with R ²?>?0.9996. The developed method provided lower limits of detection for As(III), DMA, MMA, As(V), and ROX (0.80, 0.58, 0.35, 0.24, and 1.52 μg As?·?L^?1, respectively) and excellent recoveries (92.52–102.2 %) for all five species. Arsenic speciation was not altered by 0.1 mol?·?L^?1 NaH₂PO₄ + 0.1 mol?·?L^?1 H₃PO₄ (9:1, v/v), which offered better average extraction efficiencies for As(III), As(V), DMA, MMA, and ROX (32.49, 92.50, 78.24, 77.64, and 84.54 %, respectively). Extraction performance of arsenicals was influenced by soil properties, including pH, cation exchange capacity (CEC), total Fe, and amorphous Fe.

Conclusions

ROX and its metabolites from soils could be satisfactorily separated by the developed method for the studied arsenicals. To extract arsenic species from soils, 0.1 mol?·?L^?1 NaH₂PO₄ + 0.1 mol?·?L^?1 H₃PO₄ (9:1, v/v) was recommended. Extraction efficiencies of arsenicals were influenced more by solvent composition than soil physicochemical properties. The present study provides a valuable tool and useful information for determining the concentrations of ROX and its metabolites in contaminated soils.

     

Effects of Single,Binary and Quinary Mixtures of Phenanthrene and Its N-PAHs on <Emphasis Type="Italic">Eisenia fetida</Emphasis> in Soil

It is now acknowledged that aromatic hydrocarbons present in contaminated soils occur in mixtures. The effect of single, binary and quinary mixtures of phenanthrene and selected nitrogen-containing polycyclic aromatic hydrocarbons (N-PAHs) were investigated on the survival, growth and behavioural index of earthworms (Eisenia fetida) over a 21-day incubation in soil. The results showed that the LC₅₀ values ranged from (not detected) ND–329.3 mg kg^?1 (single mixture), ND–219.8 mg kg^?1 (binary mixtures) to 148.4 mg kg^?1 (quinary mixture), while the EC₅₀ values (based on weight loss) ranged from 13.3–148.4 mg kg^?1 (single mixture), 63.8–148.4 mg kg^?1 (binary mixture) to 24.2 mg kg^?1 (quinary mixture). Greater impacts were recorded where N-PAHs are present with phenanthrene. Further, behavioural index of E. fetida was affected after 24-h exposure to N-PAH-amended soils. Among the N-PAHs however, benzo[h]quinoline recorded the greatest impact on the survival, growth and behavioural index of E. fetida in soil. Findings from this study showed that three ring-N-PAHs are more toxic than phenanthrene as expected from their physico-chemical properties. The binary and quinary mixtures of phenanthrene and N-PAHs in soil intensified toxicity, suggesting that PAHs-N-PAHs mixtures represent greater risk to soil biota.     

Simultaneous Biodegradation and Detoxification of the Herbicides 2,4-Dichlorophenoxyacetic Acid and 4-Chloro-2-Methylphenoxyacetic Acid in a Continuous Biofilm Reactor

The herbicides 2,4-diclorophenoxiacetic and 4-chloro-2-methylphenoxyacetic acids (2,4-D and MCPA) are widely used in agricultural practices worldwide. Not only are these practices responsible of surface waters contamination, but also agrochemical industries through the discharge of their liquid effluents. In this investigation, the ability of a 2,4-D degrading Delftia sp. strain to degrade the related compound MCPA and a mixture of both herbicides was assessed in batch reactors. The strain was also employed to remove and detoxify both herbicides from a synthetic effluent in a continuous reactor. Batch experiments were conducted in a 2-L aerobic microfermentor, at 28 °C. Continuous experiments were carried out in an aerobic downflow fixed-bed reactor. Bacterial growth was evaluated by the plate count method. Degradation of the compounds was evaluated by UV spectrophotometry, gas chromatography (GC), and chemical oxygen demand (COD). Toxicity was assessed before and after the continuous process by using Lactuca sativa seeds as test organisms. Delftia sp. was able to degrade 100 mg L^?1 of MCPA in 52 h. When the biodegradation assay was carried out with a mixture of 100 mg L^?1 of each herbicide, the process was accomplished in 56 h. In the continuous reactor, the strain showed high efficiency in the simultaneous removal of 100 mg L^?1 of each herbicide. Removals of 99.7, 99.5, and 95.0% were achieved for 2,4-D, MCPA, and COD, respectively. Samples from the influent of the continuous reactor showed high toxicity levels for Lactuca sativa seeds, while toxicity was not detected after the continuous process.     

Effects of cover crop in an apple orchard on microbial community composition,networks, and potential genes involved with degradation of crop residues in soil

Changes in the soil microbial communities and networks were monitored after planting the cover crop for 9 years. The field experiment included plots with a cover crop and without a cover crop but with weed control, and two subplots with or without chemical fertilizer (192 kg N ha^?1, 108 kg P₂O₅ ha^?1, and 168 kg K₂O ha^?1 each year). After applying the cover crop and chemical fertilizer for 9 years, the composition and activity of bacterial and fungal communities changed significantly (p?<?0.05), with the cover crop had greater effects than the chemical fertilizer on the composition of the soil microbial community. The relative abundances of 22 selected genera (in Firmicutes and Bacteroidetes) and two selected classes (Ascomycota) related to cover crop residue degradation increased significantly in the presence of the cover crop (p?<?0.05). Network analysis showed that the cover crop decreased the number of positive links between bacterial and fungal taxa by 25.33%, and increased the negative links by 22.89%. The positive links among bacterial taxa increased by 16.63% with the cover crop, mainly among Proteobacteria (increase of 39), Firmicutes (16), Actinobacteria (five), and Bacteroidetes (10). The links among fungal taxa were less than among bacterial taxa and were not significantly affected by cover crop. Taxa such as Thaumarchaeota, unidentified_Nitrospiraceae, unidentified_Nitrosomonadaceae, Faecalibacterium, Coprococcus_3, and Ruminococcaceae_NK4A214_group dominated the network without the cover crop but they were not dominant with the cover crop. The relative abundances of potential genes involved with the degradation of cellulose, hemicellulose, and cello-oligosaccharides increased significantly with the cover crop. Therefore, the SOC and TN contents were enhanced by the cover crop with the increase of the soil enzyme activities. Thus, the apple yield was improved by the cover crop.     

Comparison of Partitioning and Efficacy Between Copper Algaecide Formulations: Refining the Critical Burden Concept

Filamentous mat-forming algae are increasingly impairing freshwater resources. To restore water utility, reactive management programs often involve application of copper-based algaecides. Copper algaecide formulations can differ significantly, and this research outlined an advanced approach to evaluate formulation efficiency for controlling filamentous algae. Two common algal species (Lyngbya wollei, Pithophora varia) were used to assess copper internalization and adsorption as well as relation to control among copper formulations. Captain® XTR achieved control (7-day EC₈₅) of L. wollei with internal copper concentrations of 0.78 and 0.76 mg Cu/g based on chlorophyll a content or filament viability, respectively. Cutrine® Ultra achieved control of L. wollei based on filament viability only at 0.85 mg Cu/g. Internalized copper concentrations required for control following Captain XTR exposures were similar for P. varia, 0.81 and 0.95 mg Cu/g, whereas Cutrine Ultra and copper sulfate did not elicit control nor attain the critical internal copper threshold. The relationship between internalized copper and responses, among all formulations, was significant (P?<?0.0001) with R² values of 0.920 and 0.935 for L. wollei and 0.807 and 0.826 for P. varia based on filament viability and chlorophyll a content, respectively. Formulation efficiency, internalized copper versus total amended, was greatest with Captain XTR (average 0.17), followed by Cutrine Ultra (0.13), and copper sulfate (0.09). By measuring the efficiency of a specific algaecide and the corresponding amount required to achieve control of targeted algal biomass, management objectives can be achieved while decreasing environmental loads of copper, number of treatments, and operational costs.     

Study of Heavy Metal Accumulation and Residual Toxicity in Soil Saturated with Phosphate Processing Wastewater

The effects of phosphate processing wastewater (PPWW) on heavy metal accumulation in a Mediterranean soil (Tunisia, North Africa) were investigated. Moreover, the residual toxicities of PPWW-irrigated soils extracts were assessed. Results showed that heavy metal accumulation was significantly higher in PPWW-irrigated soil extracts than in control soil. The heavy metal accumulation increased over time in treated soil samples and their average values followed the following order: Iron (Fe 252.72 mg l^?1) > Zinc (Zn 152.95 mg l^?1) > Lead (Pb 128.35 mg l^?1) > Copper (Cu 116.82 mg l^?1) > Cadmium (Cd 58.03 mg l^?1). The residual microtoxicity and phytotoxicity of the various treated soil samples extracts were evaluated by monitoring the bioluminescence inhibition (BI %) of Vibrio ficheri and the measurement of the germination indexes (GI %) of Lepidium sativum and Medicago sativa seeds. The results showed an important increase of residual toxicities of PPWW-treated soil extracts over time.     

Biodegradability of Disinfectants in Surface Waters from Buenos Aires: Isolation of an Indigenous Strain Able to Degrade and Detoxify Benzalkonium Chloride

Biodegradability of chlorhexidine (CH), triclosan (TC), and benzalkonium chloride (CBA) has been tested in 18 surface water sampling points in the urban area of Buenos Aires. Sampling points were located in both the Reconquista and the Matanza-Riachuelo basins as well as in the La Plata River. High tolerance to the three disinfectants was found and indigenous strains capable of degrading CBA and TC were isolated. Neither tolerance nor biodegradation were correlated with sewage pollution. A strain that degrades CBA was identified as belonging to the genus Pseudomonas using the API20NE system and 16SRNA sequencing. In batch assays, the strain was capable of degrading 100, 200, and up to 500 mg L^?1 of CBA in 10, 25, and 46 h respectively with specific growth rates (μ) of 0.56, 0.30, and 0.14 h^?1. The efficiency of the process was between 99.5–98.0% in terms of compound removal and between 93.8–89.1% in terms of chemical oxygen demand (COD). The detoxification of the compound as a result of the biodegradation was assessed using Pseudokirchneriella subcapitata, Vibrio fischeri, and Lactuca sativa as test organisms.     

Interactive effects of biochar addition and elevated carbon dioxide concentration on soil carbon and nitrogen pools in mine spoil

Purpose

This study aimed to assess the effects of biochar on improving nitrogen (N) pools in mine spoil and examine the effects of elevated CO₂ on soil carbon (C) storage.

Materials and methods

The experiment consisted of three plant species (Austrostipa ramossissima, Dichelachne micrantha, and Lomandra longifolia) planted in the N-poor mine spoil with application of biochar produced at three temperatures (650, 750, and 850 °C) under both ambient (400 μL L^?1) and elevated (700 μL L^?1) CO₂. We assessed mine spoil total C and N concentrations and stable C and N isotope compositions (δ¹³C and δ¹⁵N), as well as hot water extractable organic C (HWEOC) and total N (HWETN) concentrations.

Results and discussion

Soil total N significantly increased following biochar application across all species. Elevated CO₂ induced soil C loss for A. ramossissima and D. micrantha without biochar application and D. micrantha with the application of biochar produced at 750 °C. In contrast, elevated CO₂ exhibited no significant effect on soil total C for A. littoralis, D. micrantha, or L. longifolia under any other biochar treatments.

Conclusions

Biochar application is a promising means to improve N retention and thus, reduce environmentally harmful N fluxes in mine spoil. However, elevated CO₂ exhibited no significant effects on increasing soil total C, which indicated that mine spoil has limited potential to store rising atmospheric CO₂.

     

Impact of Long-Term Perfluorooctanoic Acid (PFOA) Exposure on Activated Sludge Process

Poly- and perfluorinated alkyl substances (PFASs) are groups of persistent toxic substances that have been commonly detected in wastewater treatment plants (WWTPs). In some cases, the activated sludge (AS) in WWTPs will encounter special wastewaters containing PFASs up to tens of milligram per liter (mg L^?1). However, under this condition, the potential impacts of PFASs on AS process remain unclear. In the present research, a lab-scale sequencing batch reactor was continuously exposed to perfluorooctanoic acid (PFOA), used as a representation for PFASs, at 20 mg L^?1 to mimic the extreme condition. The objective is to explore the impact of PFOA on AS process in terms of its wastewater treatment performance and evolution of microbial communities. The results indicate that PFOA restrained the microbial growth and affected the dissolved organic carbon removal. These negative impacts could be recovered after long-term adaptation. Besides, 20 mg L^?1 PFOA shows limited inhibition on nitrification and denitrification, suggesting a safe exposure level of PFOA for nitrogen removal. For microbial evolution, PFOA induced changes of communities during long-term exposure. The high abundance of Bacteroidetes, Proteobacteria, and Acidobacteria maintained over time reveals their tolerance towards PFOA. The occurrences of PFOA-resistant species are also observed. The present research provides new insight into the possible impacts of typical PFAS at high concentrations on AS process.     

Rapid estimation of microbial biomass in acid red soils with and without substrate incorporation

Purpose

A rapid and alternative measurement of microbial biomass in acid red soils with and without substrate incorporation is proposed for soil quality evaluation.

Materials and methods

Soil microbial biomass C (SMBC) and N (SMBN) in 24 typical red soil samples developed from two parent materials (granite and arenaceous shale) were measured using fumigation-extraction followed by dry combustion method in comparison with ultraviolet (UV) spectrophotometry (increase in absorbance at 280 nm, ΔUV₂₈₀). The reliability of microbial biomass estimation by UV spectrophotometry was verified using six representative red soils amended with biochar (0, 1, 3 and 5%) and glucose (0, 100, 500 and 1000 mg kg^?1) separately.

Results and discussion

ΔUV₂₈₀ was strongly correlated with SMBC and SMBN measured by dry combustion, regardless of biochar/glucose incorporation. Validated conversion equations from unamended soil data were dependent on confounding effects of organic C and particle size and can be described as follows: SMBC?=?27.08?×?ΔUV₂₈₀ (R²?=?0.67, n?=?24) and SMBN?=?3.62?×?ΔUV₂₈₀ (R²?=?0.69, n?=?24). Regression models for rapid estimation of microbial biomass in red soils from different parent materials had to be calibrated separately in case of amendments. In most cases, SMBC (R² of 0.75–0.76 and root mean square error (RMSE) of 22.2–29.3 mg kg^?1) and SMBN (R² of 0.74–0.80 and RMSE of 2.60–14.2 mg kg^?1) can be predicted from ΔUV₂₈₀ in biochar/glucose-amended soils using these equations. The slope of the regression of SMBC against ΔUV₂₈₀ shifted in biochar-amended granite soils, mainly due to uncoordinated changes of SMBC in response to the difference in parent material-induced nutrient availability, while shifts of SMBC (or SMBN) against ΔUV₂₈₀ in glucose-amended arenaceous shale soils were attributed to particle size distribution.

Conclusions

Soil microbial biomass (SMBC and SMBN) in red soils can be rapidly predicted by fumigation-extraction with UV spectrophotometry detection and corresponding correction of calibration curves, depending on soil nutrient availability, particle size distribution and organic C levels.