Comparison of Asian Noodles from Some Hard White and Hard Red Wheat Flours

Asian noodles were prepared by an objective laboratory method that included adding optimum water to the dry ingredients, mixing the ingredients to homogeneous salt distribution, and sheeting of the dough under low shear stress. The lightness (L*) values of alkaline‐ and salt‐noodle doughs made from 65% extraction hard white wheat flours (except KS96HW115 flour at ≈70% extraction) were higher than those from 60% extraction hard red wheat flours (except Karl 92 flour at ≈70% extraction). A hard white spring wheat, ID377s, and a Kansas line of hard white winter wheat, KS96HW115, to be released in 2000, gave the highest L* values for dough sheets stored for 2 and 24 hr at 25°C. Cooking losses were 5–9 percentage points higher for alkaline noodles than salt noodles, but the cooking yields of the two types of Asian noodles were almost the same. Cooked alkaline noodles made from a high‐swelling flour (SP₉₃≈21 g/g) gave higher tensile strength than those made from several low‐swelling flours (SP₉₃ ≈15 g/g) with the same protein contents (≈12.5%). However, the cooked salt noodles gave the same tensile strength.     

Investigation of a Small‐Scale Asymmetric Centrifugal Mixer for the Evaluation of Asian Noodles

A high throughput centrifugal mixer capable of using smaller amounts of flour (50 g) was evaluated for the production of oriental alkaline noodles. The unit requires a small footprint on a laboratory bench and offers variable speed mixing (300–3,500 rpm) for 5–60 sec. Three different mixing bowls, plain, pin, and paddle, were evaluated for the small‐scale production of alkaline noodles using straight‐grade flour derived from Canada Western Red Spring (CWRS) and Canada Prairie White Spring (CPSW) wheat. Under optimized mixing conditions (3,000 rpm for 30 sec), the pin and paddle bowls produced noodle dough with crumb size distribution and adhesion characteristics consistent with commercial requirements. The plain bowl produced dough with larger undesirable dough chunks and showed excessive heat buildup. Noodle sheets produced from this dough were not comparable in color characteristics to conventionally produced noodle sheets. Noodles prepared using the paddle mixer also displayed some significantly different color and texture characteristics than conventionally prepared noodles. However, raw noodle sheets or cooked noodles of either wheat class, prepared using the pin bowl mixer, displayed color values (L*, a*, and b*) at 2 and 24 hr and cooked noodle texture characteristics (bite, chewiness, resistance to compression, and recovery) comparable to a conventional laboratory‐scale Hobart type mixer. In addition to the very short mixing time and small equipment footprint for the centrifuge mixer, rapid throughput is enhanced by the ability to rapidly clean or interchange bowls and to potentially vary sample size to as little as 5 g. These attributes should be particularly useful in earlier generation breeder programs where large numbers of samples require rapid screening.     

Refrigerated Storage of Yellow Alkaline Durum Noodles: Impact on Color and Texture

Durum wheat straight‐grade flour samples, representing the cultivars Commander and Strongfield, a composite cargo mixture of Canada Western Amber Durum cultivars and a Japanese commercial durum flour were used to make yellow alkaline noodles. A Canada Western Red Spring common wheat composite straight‐grade flour was included in the study for comparative purposes. Alkaline noodles were prepared using 1% w/w kansui reagent (sodium and potassium carbonates, 9:1) and stored for 1, 2, 3 and 7 days at 4°C to duplicate a normal convenience store operation. The raw noodle color of the durum alkaline noodles exhibited significantly better noodle brightness, L*, and yellowness, b*, as compared to noodles prepared from common wheat at all storage periods. The number of discolored specks in the durum flour based noodles was significantly lower as well as significantly lighter than those of common wheat at all time intervals. Noodles prepared from Commander, Strongfield, or the cargo composite flours displayed significantly lower water uptake during cooking than both the commercial durum flour and the common wheat noodles. The commercial durum flour noodles displayed the thinnest cooked noodles, while the common wheat flour noodles were the thickest. Evaluation of cooked noodle texture, immediately after production and subsequent storage of the raw noodles at 4°C for 1, 2 and 3 days before cooking showed a general increase in maximum cutting stress (MCS) with storage. Noodles prepared from Commander flour consistently display MCS values exceeding those of CWRS as well as the highest resistance to compression (RTC) and recovery (REC) measurements. The visual improvements in noodle brightness, enhanced yellowness, reduced speck numbers and darkness in combination with equivalent to improved cooked noodle texture attributes compared with common wheat flour suggests that durum flours are an ideal material for fresh, refrigerated yellow alkaline noodles.     

Relationship Between Physicochemical Properties of Wheat Flour,Wheat Protein Composition,and Textural Properties of Cooked Chinese White Salted Noodles

Physicochemical properties and protein composition of 39 selected wheat flour samples were evaluated and correlated with the textural properties of Chinese hard‐bite white salted noodles. Flour samples were analyzed for their protein and wet gluten contents, sedimentation volume, starch pasting properties, and dough mixing properties by farinograph and extensigraph. Molecular weight distribution of wheat flour proteins was determined with size‐exclusion (SE) HPLC, SDS‐PAGE, and acid‐PAGE. Textural properties of Chinese hard‐bite white salted noodles were determined through texture profile analysis (TPA). Hardness, springiness, gumminess, and chewiness of cooked noodles were found to be related to the dough mixing properties. Both protein content and protein composition were found to be related to TPA parameters of noodles. The amount of total flour protein was positively correlated to hardness, gumminess, and chewiness of noodles. The absolute amounts of different peak proteins obtained from SE‐HPLC data showed positive correlations with the hardness, gumminess, chewiness, and springiness of noodles. The proportions of these peak proteins were, however, not significantly related to texture parameters. The proportions of low‐molecular‐weight glutenins/gliadins and albumins/globulins, as observed from SDS‐PAGE, were correlated positively and negatively, respectively, to the hardness, gumminess, and chewiness of cooked noodles. Among the alcohol‐soluble proteins (from acid‐PAGE data), β‐gliadins showed strong correlations with the texture properties of cooked noodles. For the selected flour samples, the total protein content of flour had a stronger relationship with the noodle texture properties than did the relative proportion of different protein subgroups. Prediction equations were developed for TPA parameters of cooked noodles with SE‐HPLC and rapid visco analysis data of the 30 flour samples, and it was found that about 75% of the variability in noodle hardness, gumminess, and chewiness values could be explained by protein composition and flour pasting properties combined together. About 50% of the variations in cohesiveness and springiness were accounted for by these prediction equations.     

Measurement of Color,Gloss, and Translucency of White Salted Noodles: Effects of Water Addition and Vacuum Mixing

Sensory evaluation showed panelists could detect small differences in gloss and translucency in boiled white salted noodles (WSN) but sensory evaluation requires significant resources. Methods for the measurement of noodle gloss and translucency in boiled WSN were developed and the effects of hardness, protein, water addition, and vacuum mixing on these visual sensory characteristics and color (as measured by CIE L*, a*, and b*) were investigated. Noodles derived from hard wheats at low flour protein contents were more translucent than noodles from soft wheat flour at low protein. This trend changed at the highest flour protein contents observed. Translucency of the soft wheat noodles increased to levels equal to or exceeding the translucency of high protein hard wheat noodles. Translucency of all noodle varieties increased as flour protein increased. CIE L* decreased, a* increased, and b* increased when water addition to dough increased from 30 to 35%, but there was no further effect on color when water addition was increased to >35% for raw soft and hard WSN. Boiled noodle translucency was significantly increased when water addition to the dough was increased from 35 to 38% and when noodles made from soft wheat flour were mixed under vacuum. Vacuum mixing significantly increased gloss of boiled noodles made from soft wheat flours.     

Suitability of Ontario‐Grown Hard and Soft Wheat Flour Blends for Noodle Making

This study evaluated the blending of flours made from an Ontario hard red winter wheat (HWF) and an Ontario soft red winter wheat (SWF) and compared it with a commercial standard noodle flour (control) made from Canadian Western Hard Red Spring wheat to assess the impact on white salted noodle‐making performance and texture of cooked noodles. Flour characteristics, gluten aggregation, and starch pasting properties were assessed with a farinograph, GlutoPeak tester, and Rapid Visco Analyzer, respectively. The machinability of dough was evaluated with an SMS/Kieffer rig attached to a TA.XT Plus texture analyzer. Tensile and bite tests of cooked noodles were also conducted. Blending HWF with standard noodle flour decreased gluten strength and dough extensibility linearly proportional to the blend ratio, whereas a curvilinear response from blending SWF with standard noodle flour was observed. HWF demonstrated more favorable pasting properties except for lower peak viscosity for noodle making than standard noodle flour. Below a 20% blend ratio with HWF, no significant changes were seen on dough extensibility, cooking loss, tensile properties, and bite testing parameters of cooked noodles. It can be concluded that blending HWF up to a 20% level caused no significant change in the processing properties of dough and cooked noodle quality. The results also showed that the GlutoPeak tester is a sensitive tool for evaluating gluten strength in wheat flour.     

Delineating the role of polyphenol oxidase in the darkening of alkaline wheat noodles

This study evaluated the effects of inhibitors on polyphenol oxidase (PPO) activity, the effect of the PPO inhibitor tropolone on noodle darkening, and the correlation of PPO activity with darkening of alkaline noodles. The PPO inhibitors tropolone and salicylhydroxamic acid (each at 1 microM) reduced kernel PPO activity by approximately 50% in three hexaploid wheat cultivars but did not inhibit PPO activity in the two very low PPO cultivars, durum Langdon, and the synthetic hexaploid-derived ID580. Tropolone (100 microg/g flour) inhibited alkaline noodle darkening (deltaL*) by 13-25% in the low PPO wheat cultivar, ID377s, and by 39-54% in the high PPO wheat cultivar, Klasic. Alkaline noodle darkening among 502 wheat samples was correlated with kernel PPO activity (r = 0.64). Results substantiate the hypothesis that PPO plays a major role in darkening of alkaline noodles. However, results also indicate that substantial darkening would occur even at zero PPO activity, as measured in the kernel PPO assay. Therefore, darkening of alkaline noodles is probably due to the cultivar-specific level of PPO activity and the presence of at least one additional darkening mechanism. Further investigation is required to identify the phenolic discoloration agent(s) and to determine the potential roles of non-PPO discoloration mechanisms, both enzymatic and nonenzymatic, in wheat products.     

Effects of Protein Content,Glutenin‐to‐Gliadin Ratio,Amylose Content,and Starch Damage on Textural Properties of Chinese Fresh White Noodles

The independent effects of flour protein and starch on textural properties of Chinese fresh white noodles were investigated through reconstitution of fractionated flour components. Noodle hardness decreased with decreased protein content, whereas it unexpectedly increased as protein content decreased to a very low level (7.0%). Noodle cohesiveness, tensile strength, and breaking length increased with increased protein content. Higher glutenin‐to‐gliadin ratio resulted in harder and stronger noodles at constant protein content. Increased starch amylose content resulted in increased flour peak viscosity. When water absorption remained the same during noodle making, hardness and cohesiveness of cooked noodles also increased with increased starch amylose content, while springiness did not vary significantly. Increased starch damage of ≈5.5–10.4% effectively improved noodle hardness; however, starch damage >10.4% decreased it. Increased starch damage also enhanced noodle springiness while it decreased cohesiveness.     

Reduced Amylose Effects on Bread and White Salted Noodle Quality

Amylose content in wheat endosperm is controlled by three Wx loci, and the proportion of amylose decreases with successive accumulation of Wx null alleles at the three loci. The proportion of amylose is believed to influence end‐use quality of bread and Asian noodles. The objectives of this study were to determine influence of the allelic difference at Wx‐B1 locus on bread quality, bread firmness, and white salted noodle texture in a spring wheat cross segregating for the Wx‐B1 locus and in a set of advanced spring wheat breeding lines differing in allelic state at the Wx‐ B1 locus. In addition, we examined the relationship between amylose content and flour swelling properties on bread and noodle traits. Fifty‐four recombinant inbred lines of hard white spring wheat plus parents were grown in replicated trials in two years, and 31 cultivars and breeding lines of hard spring wheat were grown in two locations. Bread and white salted noodles were processed from these trials. The presence of the Wx‐B1 null allele reduced amylose content by 2.4% in a recombinant inbred population and 4.3% in a survey of advanced breeding lines and cultivars compared with the normal. The reduced amylose was accompanied by an average increase in flour swelling power (FSP) for the Wx‐B1 null group of 0.8 g/g for the cross progeny and 2.3 g/g for the cultivar survey group. The Wx‐B1 allelic difference did not affect flour protein in cross progeny where the allelic difference was not confounded with genetic background. Bread from the Wx‐B1 null groups on average had increased loaf volume and was softer than the normal group for the cross progeny and cultivar survey group. The Wx‐B1 allelic difference altered white salted noodle texture, most notably noodle springiness and cohesiveness where the Wx‐B1 null groups was more springy and more cohesive than the normal groups for both sets of genetic materials. Flour protein was more highly related to loaf volume than were FSP or amylose. Both flour protein and FSP were positively related to noodle textural traits, but especially noodle springiness and cohesiveness.     

Great Northern Bean Could Improve the Nutritional Value of Instant Noodles

Instant noodles were prepared by substituting hard red winter (HRW) wheat flour with Great Northern bean powder (GNBP) at selected levels (0–60%) using a pilot‐scale noodle processing machine. The functional properties, water absorption, water solubility, and pasting profiles of flour mixtures were tested to verify the process tolerances of ingredients. Prepared noodle samples were evaluated for color, cooking quality, texture, and sensory properties. Slight color differences, an increased cooking loss, and reduced chewiness, cohesiveness, and hardness were observed in cooked noodles that were prepared with GNBP up to 25% of HRW wheat flour weight. The results suggest that HRW wheat flour could be replaced up to 20% (w/w) with GNBP, while still using the conventional processing conditions, to improve the product nutritional value (i.e., increased protein and fiber contents and reduced fat content) (P < 0.05).     

Characteristics of Noodles and Bread Prepared from Double‐Null Partial Waxy Wheat

Double‐null partial waxy wheat (Triticum aestivum L.) flours were used for isolation of starch and preparation of white salted noodles and pan bread. Starch characteristics, textural properties of cooked noodles, and staling properties of bread during storage were determined and compared with those of wheat flours with regular amylose content. Starches isolated from double‐null partial waxy wheat flours contained 15.4–18.9% amylose and exhibited higher peak viscosity than starches of single‐null partial waxy and regular wheat flours, which contained 22.7–25.8% amylose. Despite higher protein content, double‐null partial waxy wheat flours, produced softer, more cohesive and less adhesive noodles than soft white wheat flours. With incorporation of partial waxy prime starches, noodles produced from reconstituted soft white wheat flours became softer, less adhesive, and more cohesive, indicating that partial waxy starches of low amylose content are responsible for the improvement of cooked white salted noodle texture. Partial waxy wheat flours with >15.1% protein produced bread of larger loaf volume and softer bread crumb even after storage than did the hard red spring wheat flour of 15.3% protein. Regardless of whether malt was used, bread baked from double‐null partial waxy wheat flours exhibited a slower firming rate during storage than bread baked from HRS wheat flour.     

Evaluation of White Salted Noodles Enriched with Oat Flour

Oat consumption is regarded as having significant health benefits. The enrichment of white salted noodles with oat flour would provide a potential health benefit but may affect the texture and sensory quality. Oat cultivars grown in Western Australia (Yallara, Kojonup, Mitika, Carrolup, and new line SV97181‐8) and a commercial oat variety were milled into flour and added to wheat flour at 10, 20, and 30% to produce oat‐enriched white salted noodles. The purpose of the study was to determine the quality characteristics of the oat flours and to assess the influence the oat flour blends had on noodle texture, color, and sensory characteristics. In addition, another goal was to determine whether the different oat cultivars had similar potential to provide health benefits by measuring the β‐glucan content before and after processing. The results indicated that protein, ash content, and noodle firmness increased with the increased percentage of oat flour in the noodle formulations, whereas the pasting properties of the noodle wheat–oat flour blends did not differ significantly. The color of raw noodle sheets and boiled noodles changed significantly with oat incorporation and resulted in lower lightness/brightness, higher redness, lower yellowness, and lower color stability in comparison to standard wheat white salted noodles. Noodles made with the lowest oat percentage (10%) scored highest for all sensory parameters and were significantly different in appearance, color, and overall acceptability compared with noodles made with 20 and 30% oat flour. The β‐glucan content of the flour blends increased with the increase in the level of oat incorporation but subsequently decreased during processing into noodles. The decrease in the β‐glucan content varied across the different oat cultivars and levels of incorporation into the noodles. A new oat cultivar, SV97181‐8, exhibited the least β‐glucan loss during processing. In this study, the quality characteristics of white salted noodles enriched with oat flour from Western Australian cultivars were determined to provide essential information for the commercial development of healthier noodles.     

Characteristics and Protein Subunit Composition of Flour Mill Streams from Different Commercial Wheat Classes and Their Relationship to White Salted Noodle Quality

Proximate characteristics and protein compositions of selected commercial flour streams of three Australian and two U.S. wheats were investigated to evaluate their effects on the quality of white salted noodles. Wheat proteins of flour mill streams were fractionated into salt‐soluble proteins, sodium dodecyl sulfate (SDS)‐soluble proteins, and SDS‐insoluble proteins with a sequential extraction procedure. SDS‐soluble proteins treated by sonication were subsequently separated by nonreducing SDS polyacrylamide gel electrophoresis (SDS‐PAGE). There was a substantial amount of variation in distributions of protein content and protein composition between break and reduction mill streams. SDS‐insoluble proteins related strongly to differences in protein quantity and quality of flour mill streams. The soluble protein extracted by SDS buffer included smaller glutenin aggregates (SDS‐soluble glutenin) and monomeric proteins, mainly gliadin (α‐, β‐, γ‐, and ω‐types) and albumin and globulin. SDS‐soluble proteins of different flour mill streams had similar protein subunit composition but different proportions of the protein subunit groups. Noodle brightness (L) decreased and redness (a) increased with increased SDS‐insoluble protein and decreased monomeric gliadin. Noodle cooking loss and cooking weight gain decreased with increased glutenin aggregate (SDS‐soluble glutenin and SDS‐insoluble glutenin) and decreased monomeric gliadin. Noodle hardness, springiness, cohesiveness, gumminess, chewiness, tensile strength, breaking length, and area under the tensile strength versus breaking length curve increased with increased glutenin aggregate. Monomeric gliadin contributed differently to texture qualities of cooked noodles from glutenin aggregate. Monomeric albumin and globulin were not related to noodle color attributes (except redness), noodle cooking quality, and texture qualities of cooked noodles. The results suggested that variation in protein composition of flour mill streams was strongly associated with noodle qualities.     

Quality Characteristics of Fresh and Dried White Salted Noodles Enriched with Flour from Hull‐less Barley Genotypes of Diverse Amylose Content

Fresh and dried white salted noodles (WSN) were prepared by incorporating up to 40% flour from hull‐less barley (HB) genotypes with normal amylose, waxy, zero amylose waxy (ZAW), and high amylose (HA) starch into a 60% extraction Canada Prairie Spring White (cv. AC Vista) wheat flour. The HB flours, depending on genotype, contained four to six times the concentration of β‐glucan of the wheat flour, offering potential health benefits. The HB‐enriched noodles were made with conventional equipment without difficulty. Noodles containing 40% HB flour required less work input during sheeting, probably due to higher optimum water absorption and weakening of the dough due to dilution of wheat gluten. The addition of HB flour had a negative impact on WSN color and appearance, as evident from decreased brightness, increased redness, and more visible specking. The impact of HB flour on cooked WSN texture varied by starch type. Enrichment with HA or normal starch HB flour produced WSN with bite and chewiness values equivalent to or superior to the wheat flour control. Addition of waxy and ZAW HB flour resulted in WSN with lower values for bite and chewiness. The diversity of HB starch types allows tailoring of WSN texture to satisfy specific markets. HB flour also has potential as an ingredient in novel noodle products targeting health‐conscious consumers who associate darker colored cereal‐based foods with superior nutritional composition.     

Physicochemical Properties of Australian Flours Influencing the Texture of Yellow Alkaline Noodles

Flour properties of 25 Australian wheat cultivars were examined for their relationship to alkaline noodle quality. Rapid Visco Analyzer (RVA) analyses of flours showed that RVA breakdown and final viscosity determined in both water and dilute sodium carbonate were significantly related to the alkaline noodle firmness, elasticity, and surface smoothness. Flour swelling volume (FSV) of flours was negatively correlated with alkaline noodle firmness and elasticity, and positively correlated with surface smoothness of cooked noodles. Use of a dilute sodium carbonate solution led to overall increases in both paste viscosity and FSV. High FSV and low RVA final viscosity values were associated with both the softest noodles and with cultivars containing a null allele for granule-bound starch synthase on chromosome 4A. Flour protein content and SDS sedimentation volumes were significantly related to noodle texture. The relationship between protein content and noodle firmness was dependent on the Null4A status of the flours and suggested an interaction between starch and protein in determining noodle texture. Multiple regression analysis using flour protein and FSV accounted for 76% of the variation in alkaline noodle firmness. A speculative model of noodle structure was developed based on a concept of the cooked noodle as a composite material.     

Optimization of Rapid-Visco Analyser Test Conditions for Predicting Asian Noodle Quality

A variety of Rapid-Visco Analyser (RVA) operating conditions have been tested with starch, flour, and wholemeal for predicting the quality of wheats for the manufacture of Japanese white-salted noodles. Using starch as the substrate, an initial temperature of 60°C has been found to be optimum, and the best heating time from this initial temperature to the peak temperature of 95°C was ≈6 min. Significant correlations were found between peak viscosity of starch pastes and noodle quality under these operating conditions. For flour and wholemeal samples, the correlations were not as high as for isolated starch. The correlations with wholemeal or flour and noodle quality could be improved by the addition of α-amylase inhibitors. Measuring RVA viscosity of flour or wholemeal in the presence of silver nitrate gave viscosities which showed highly significant correlations with noodle quality. These correlations were similar to those obtained with isolated starch. It appears that the improvement is due to inhibition of the α-amylase present in grain and flour. Correlations were also observed between flour paste viscosity and alkaline noodle quality. These could be increased either by inhibiting α-amylase with silver nitrate or by pH adjustment with sodium carbonate but the change was not significant. The improvement of the correlations by α-amylase inhibitors in this sample set was not as great as observed with Japanese white noodles.     

Flour Particle Size,Starch Damage,and Alkali Reagent: Impact on Uniaxial Stress Relaxation Parameters of Yellow Alkaline Noodles

Three patent flours, each possessing three different levels of starch damage were prepared from a single hard white spring wheat. Each flour was sieved to yield three flours with different particle size distributions (85–110, 110–132, 132–183 μm). Raw alkaline noodles were prepared from the nine flours using either 1% w/w kansui (sodium and potassium carbonates in 9:1 ratio) or 1% w/w sodium hydroxide. Uniaxial stress relaxation parameters percent stress relaxation (SR%), initial rate of relaxation (k₁) and the extent of relaxation (k₂) were measured on the raw noodles immediately after production (t = 0 min) and at 60 min. Raw noodles after resting for 60 min were optimally cooked and stress relaxation parameters were measured. Raw noodles at t = 0 min exhibited SR%, k₁, and k₂ that were significantly (P < 0.0001) influenced by both the degree of starch damage and the type of alkaline reagent used. Flour particle size only influenced SR% and k₁ (P < 0.025) but had no impact on k₂. In raw noodles aged for 60 min, both SR% and k₂ were significantly influenced by alkaline reagent, particle size, and starch damage (P < 0.01) while k₁ was only affected by the degree of starch damage (P < 0.0001). Cooked noodle SR parameters were all significantly (P < 0.0001) influenced by alkaline reagent, particle size, and the degree of starch damage. Cooked noodles prepared from starch with low damaged flours within any given particle size range, regardless of the type of alkali employed, yielded the most rheologically elastic‐like (firmer) noodles. Two potential mechanisms by which the degree of starch damage influences noodle elastic like texture are discussed.     

Environmental Influences on Flour Quality for Sheeted Noodles in Idaho 377s Hard White Wheat

Production of common wheat (Triticum aestivum L.) in the Pacific Northwest of the United States specifically for Asian noodle products is a relatively new goal for grain producers. We surveyed commercial fields of the hard white spring wheat cultivar Idaho 377s in two years to determine the variables contributing to Asian noodle quality and to validate previous observations made with small‐plot research. Fields were surveyed in 1998 and 1999 in two areas of the Snake River Plain of southeastern Idaho separated by ≈100 km, with both irrigated fields and rain‐fed fields sampled in both zones. Samples were evaluated for grain characteristics then milled and evaluated for flour quality, alkaline noodle color, and color and texture of nonalkaline Chinese (salted, neutral pH) noodles. Grain from rain‐fed fields produced brighter and more yellow alkaline noodles than grain from irrigated fields. Grain produced in rain‐fed fields also had lower peak flour pasting viscosity than grain produced in irrigated fields. Flour ash was lowest in grain from rain‐fed fields located in a higher elevation district (Upper Valley) and greatest in grain from irrigated fields located in a lower elevation district (Lower Valley). Noodle hardness and chewiness were greater in Chinese noodles made from grain produced in the Upper Valley than grain from the Lower Valley. Chinese noodle color had significant interaction with the location and irrigation management used for producing the grain. However, Chinese noodle brightness was consistently negatively correlated with flour protein concentration. The color and texture of noodles produced from flours milled from on‐farm commercial production was consistent with previous experiment station small‐plot research.     

Elucidation of Fermentation Effect on Rice Noodles Using Combined Dynamic Viscoelasticity and Thermal Analyses

Natural fermentation of whole polished rice grains (indica) is a traditional processing method widely applied in China and South Asia to improve the texture of rice noodles. To elucidate the effects of fermentation on noodle texture, thermal analysis of rice flour and rheological measurement were performed on a gel made from the rice flour with the same solids concentration as practical noodles. The test method proved useful for monitoring starch granule swelling, gel forming, and retrogradation of rice gels during rice noodle production. Dynamic viscoelasticity in a temperature ramp sweep test showed that starch granules of the fermented sample swelled more and were more resistant to breakdown than those of the nonfermented sample. Differential scanning calorimetry revealed that the gelatinization temperature of fermented rice flour shifted to a lower temperature. The decreased protein content after fermentation also played a role in the modified rheological and thermal properties of fermented rice flour. Both fermented and nonfermented rice flour formed an elastic gel just after heating to the conclusion temperature of gelatinization (T_c). The fermented rice flour gel formed earlier with a well‐formed structure; however, it had slower retrogradation during aging. The result also indicated that the retrogradation of amylopectin impaired the desired texture of rice noodles.     

Use of Ultrasound to Investigate Glucose Oxidase and Storage Effects on the Rheological Properties of Cooked Asian Noodles

This is the first use of a longitudinal ultrasonic technique to address the rheological properties of cooked noodles. Ultrasound (11 MHz) was utilized to investigate the influence of glucose oxidase (GOx) at the 1.5 U/g of flour level on the rheological properties of cooked alkaline noodles before and after 72 h of storage at 4°C. Cooked noodle dough samples were studied by simultaneously conducting stress relaxation and transmission ultrasonic measurements, yielding Peleg's K₁ and K₂ parameters (initial rate of relaxation and extent of relaxation, respectively) and ultrasonic information on noodle texture properties. Ultrasonic phase velocities and attenuation coefficients did not show significant differences between control and GOx noodles either before or after 72 h of refrigeration. However, refrigerated storage of control and GOx noodles did result in a significant increase in wave velocity and storage modulus (M′) as well as a decrease in attenuation and tanδ_L (ratio of longitudinal loss modulus to longitudinal storage modulus), indicating increased firmness of noodle structure with storage time. Stress relaxation results on fresh unrefrigerated noodles showed an increase in Peleg's K₁ and K₂ parameters with GOx addition but did not resolve any significant changes in these parameters after 72 h of storage. This small amount of GOx did not improve cooked noodle texture, although noodle matrix changes during storage were clearly revealed by the noninvasive ultrasonic data.