Morphometric analysis of the intercarpal ligaments of the equine proximal carpal bones during simulated flexion and extension of cadaver limbs

Despite many reported cases of carpal lameness associated with intercarpal ligament injuries in horses, the morphometry, movement pattern and general intrinsic biomechanics of the carpus are largely unknown. Using osteoligamentous preparation of the carpus prepared from 14 equine cadaver forelimbs (aged 9.62 ± 4.25 years), locomotory simulations of flexion and extension movements of the carpal joint were carried out to observed carpal biomechanics and, thereafter, the limbs were further dissected to obtain morphometric measurements of the medial and lateral collateral ligaments (MLC and LCL); medial and lateral palmar intercarpal ligaments (MPICL and LPICL); intercarpal ligaments between radial (Cr) and intermediate (Ci) carpal bones (Cr-Ci ICL); and intercarpal ligaments between Ci and ulnar (Cu) carpal bones (Ci-Cu ICL). The Cr, Ci, Cu and Ca are held together by a series of intercarpal ligaments and move in unison lateropalmarly during flexion, and mediodorsally during extension with a distinguishable proximo-distal sliding movement (gliding) of Cr and Ci against each other during movement. The mean length of MCL (108.82 ± 9.64 mm) was significantly longer (p = 0.042) than LCL (104.43 ± 7.65 mm). The Cr-Ci ICL has a dorsopalmar depth of 37.58 ± 4.14 mm and a midpoint width of 12.05 ± 3.09 mm and its fibres ran diagonally from the medial side of the Ci in a proximo-palmar disto-dorsal direction (i.e. palmarodistally) to the lateral side of the Cr. The specialized movement of the Cr-Ci ICL, which appeared to be further facilitated by a longer MCL suggest a biomechanical function by which carpal damage may be minimized in the equine carpus.