| 纳米无机物对MF树脂耐磨性能的影响 |
| |
| 引用本文： | 曾月鸿,王旭,林巧佳,卞丽萍. 纳米无机物对MF树脂耐磨性能的影响[J]. 福建林学院学报, 2010, 30(4) |
| |
| 作者姓名： | 曾月鸿 王旭 林巧佳 卞丽萍 |
| |
| 作者单位： | 1. 福建农林大学材料工程学院,福建,福州,350002
2. 福建福人木业有限公司,福建,福州,350009 |
| |
| 基金项目： | 国家自然科学基金资助项目(30972311); 福建省林业厅科学基金资助项目(2007021961); 福建省科技厅产学重大专项基金资助项目(2010N5001) |
| |
| 摘 要： | 用单一和复合的纳米无机物直接加入三聚氰胺甲醛(MF)树脂中,探讨其种类、用量、复合比例等对MF树脂耐磨性的影响。结果表明,纳米二氧化硅HTSi-03和纳米三氧化二铝HTAl-06以1:2的质量比复合,总用量为30g·m-2时,能显著提高MF树脂浸渍装饰纸层压板的耐磨性能,耐磨转数可达4300r,达到浸渍纸层压木质地板国家标准家用Ⅱ级的要求。用红外光谱和差示扫描量热法进一步分析了纳米无机物对提高MF树脂耐磨性的改性机理。
|
| 关 键 词： | 纳米无机物 MF树脂 耐磨性 红外光谱分析 差示扫描量热法 |
The influence of nano inorganic mineral on the wear-resisting property of MF resin |
| |
| ZENG Yue-hong,WANG Xu,LIN Qiao-jia,BIAN Li-ping. The influence of nano inorganic mineral on the wear-resisting property of MF resin[J]. Journal of Fujian College of Forestry, 2010, 30(4) |
| |
| Authors: | ZENG Yue-hong WANG Xu LIN Qiao-jia BIAN Li-ping |
| |
| Affiliation: | ZENG Yue-hong1,WANG Xu2,LIN Qiao-jia1,BIAN Li-ping1(1.College of Material Engineering,Fujian Agriculture and Forestry University,Fuzhou,Fujian 350002,China,2.Fujian Furen Wood Industry Co.Ltd,Fujian 350009,China) |
| |
| Abstract: | Single and composite nano inorganic minerals were added to modify MF resin,and the effect of the nano inorganic mineral variety,dose and composition proportion on the wear-resisting property of MF resin were studied.The results showed:with the total dose of 30 g·m-2,by combining nano-materials HTSi-03 with HTAl-06 at the proportion of 1 to 2,the wear-resisting property of MF resin impregnated paper laminate could be dramatically increased to 4 300 turn,which was in excess of the requirement of the national standard.For further study,FTIR and DSC were used to analyse the modification mechanism of nano-materials to MF resin. |
| |
| Keywords: | nano inorganic mineral melamine formaldehyde resin wear resistance infrared spectroscopic analysis differential scanning calorimetry |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
