| 液—液循环流化床液滴形成特性研究 |
| |
| 引用本文： | 梁坤峰,高春艳,王林. 液—液循环流化床液滴形成特性研究[J]. 农业机械学报, 2011, 42(8): 228-234 |
| |
| 作者姓名： | 梁坤峰 高春艳 王林 |
| |
| 作者单位： | 1. 河南科技大学车辆与动力工程学院,洛阳,471003
2. 河南科技大学规划与建筑工程学院,洛阳,471003 |
| |
| 基金项目： | 国家自然科学基金资助项目(50906021);河南省科技攻关资助项目(102102210162);河南省自然科学研究计划资助项目(2009A470002) |
| |
| 摘 要： | 基于图像采集与处理方法对液-液循环流化床液滴形成特性进行了实验研究,提出了形成液滴的3种液-液雾化方式,考察了液-液雾化方式与射流长度脉动、液滴粒径分布的相关性,获得了液-液雾化方式的转变规律以及雾化强度、射流长度脉动和液滴粒径分布基于相对雷诺数的变化规律.结果表明,雾化过程与相对雷诺数密切相关,随着相对雷诺数的增加,雾化强度持续增强,液-液雾化方式由滴流型向层流射流型转变,最后发展为湍流射流型;在整个相对雷诺数实验范围内,射流长度的脉动表现出随机和非周期的特点,其标准方差与平均值的变化规律基本一致,在相对雷诺数为1.3×104时达到最大值;液滴的粒径分布参数一直增大到湍流射流型雾化阶段,在相对雷诺数为2.5 ×104时,液滴的粒径均匀性最好,而液滴平均粒径总体上随相对雷诺数的增大不断减小,形成液滴的最小平均粒径发生在湍流射流型雾化阶段.
|
| 关 键 词： | 流体冰 液-液循环流化床 液-液雾化 液滴形成特性 射流 |
Drop Formation Characteristic of Liquid-liquid Circulating Fluidized Bed |
| |
| Liang Kunfeng,Gao Chunyan and Wang Lin. Drop Formation Characteristic of Liquid-liquid Circulating Fluidized Bed[J]. Transactions of the Chinese Society for Agricultural Machinery, 2011, 42(8): 228-234 |
| |
| Authors: | Liang Kunfeng Gao Chunyan Wang Lin |
| |
| Affiliation: | Henan University of Science and Technology;Henan University of Science and Technology;Henan University of Science and Technology |
| |
| Abstract: | Drop formation characteristic of liquid-liquid circulating fluidized bed(LLCFB) were experimentally studied by means of image gathering and processing.Three typical liquid-liquid atomization forms related to drop formation were defined.The relativity was investigated between liquid-liquid atomization forms and jet length fluctuation or drop size distribution,and the change rules of liquid-liquid atomization forms,jet break-up intensity,jet length fluctuation and drop size distribution were obtained with the... |
| |
| Keywords: | Fluid ice Liquid-liquid circulating fluidized bed Liquid-liquid atomization Drop formation characteristic Jet |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《农业机械学报》浏览原始摘要信息 |
|
点击此处可从《农业机械学报》下载全文 |
|
