| ZMC-1.5 Q纸浆模塑生产线承载梁的优化设计 |
| |
| 引用本文： | 邱仁辉,王克奇,黄祖泰,李正红,孙达新.ZMC-1.5 Q纸浆模塑生产线承载梁的优化设计[J].东北林业大学学报,2005,33(4):54-56. |
| |
| 作者姓名： | 邱仁辉 王克奇 黄祖泰 李正红 孙达新 |
| |
| 作者单位： | 福建农林大学,福州,350002;东北林业大学;福建农林大学 |
| |
| 基金项目： | 教育部优秀青年教师资助计划;福建省教育厅科研项目 |
| |
| 摘 要： | 介绍了ZMC—1．5Q纸浆模塑包装容器生产线的结构、工作原理。采用极大一极小值法对生产线的关键部件承载梁进行了优化设计，确定了合理的承载梁的支点位置、截面形状及尺寸，使承载梁工作时变形量严格控制在允许范围内，产品湿坯成型时厚度均匀，提高了热压上下模具的对位精度及物料转移的效率与成品率。
|
| 关 键 词： | 纸浆模塑生产线 承载梁 极大-极小值 优化设计 |
Optimum Design of Load Beam of ZMC -1.5Q Pulp Molding Product Line |
| |
| Qiu Renhui,Wang Keqi,Huang Zutai,Li Zhenghong,Sun Daxin.Optimum Design of Load Beam of ZMC -1.5Q Pulp Molding Product Line[J].Journal of Northeast Forestry University,2005,33(4):54-56. |
| |
| Authors: | Qiu Renhui Wang Keqi Huang Zutai Li Zhenghong Sun Daxin |
| |
| Abstract: | The mechanical system of ZMC-1.5Q product line of packaging container of pulp mo lding was analyzed, and the optimum design of loaded beam, one of the key device s of the product line, was carried out by the principle of Max-Min methods. Comp ared with the original design, the optimum design could make the weight of beam lower, the collocation of supporting fulcra more reasonable and the system more stable. Therefore, the distortion of load beam was within the allowable range an d the molding uniformity level and contraposition accuracy of heating mould were improved as well, which improved the efficiency of material transfer and the ra tio of finished product. |
| |
| Keywords: | Product line of pulp molding Load beam Methods of Max-Min Optimum design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
