| 果树外形的检测方法 |
| |
| 引用本文： | 张富贵,洪添胜,李建雄,吕敬堂,吴雪梅.果树外形的检测方法[J].农机化研究,2008(12). |
| |
| 作者姓名： | 张富贵 洪添胜 李建雄 吕敬堂 吴雪梅 |
| |
| 作者单位： | 南方农业机械与装备关键技术省部共建教育部重点实验室(华南农业大学),广州,510642;贵州大学,机械工程学院,贵阳,550003;南方农业机械与装备关键技术省部共建教育部重点实验室(华南农业大学),广州,510642;贵州大学,机械工程学院,贵阳,550003 |
| |
| 基金项目： | 国家自然科学基金，贵州省科学技术基金 |
| |
| 摘 要： | 在果园中进行精确喷雾时,对果树外形进行准确检测是很有必要的。为此,在分析果树外形检测机理的基础上,研究了基于超声波测距的果树外形检测方法。以3种树形为例,通过超声波传感器检测距离,得出3种理论树形。试验结果表明,以超声波传感器测得的水平距离数据作为描述果树外形的依据基本可行。所测的距离数据可作为控制喷雾机的参数之一。
|
| 关 键 词： | 果树外形 超声波传感器 距离 精确喷雾 |
Detecting Method for Fruiter Shape |
| |
| Zhang Fugui,Hong Tiansheng,Li Jianxiong,Lu Jingtang,Wu Xuemei.Detecting Method for Fruiter Shape[J].Journal of Agricultural Mechanization Research,2008(12). |
| |
| Authors: | Zhang Fugui Hong Tiansheng Li Jianxiong Lu Jingtang Wu Xuemei |
| |
| Abstract: | It is necessary to exactly detect the fruiter shape for fruiter precision spray.The detection method for fruiter shape based on the ultrasonic distance measuring was studied after analyzing the detecting mechanism for fruiter shape in this paper.Measuring the distance based on ultrasonic sensor,the theoretic shape of fruiter was educed for three kind of fruiter shapes.The result showed that it was feasible to describe the fruiter shape by using the level distance data measured by ultrasonic sensor.The distance data would be one of the parameters for control sprayer. |
| |
| Keywords: | the shape of fruiter ultrasonic sensor distance precision spray |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
