首页 | 本学科首页   官方微博 | 高级检索  
     

GPS RTK平面坐标转换过程分析
引用本文:郑加柱,赵刚,陈健. GPS RTK平面坐标转换过程分析[J]. 森林工程, 2010, 26(6): 39-42
作者姓名:郑加柱  赵刚  陈健
作者单位:[1]南京林业大学,南京210037 [2]江苏省水利科学研究院,南京210017
基金项目:江苏省测绘局科研项目资助
摘    要:GPS RTK测量时,首先要求解WGS-84坐标与国家或地方坐标的转换参数,针对小区域地区四参数转换过程进行简化,对其进行验证,同时与目前使用的方法进行比较,发现在相同的条件下,此简单过程解算的参数解算精度略好,最后探讨使用该方法时,采集公共点WGS-84坐标的观测误差对坐标转换参数精度的影响,对更加方便操作RTK有指导作用。

关 键 词:GPS  RTK  坐标转换  点位误差

Analysis on Plane Coordinate Transformation Process of GPS RTK
Zheng Jiazhu,Zhao Gang,Chen Jian. Analysis on Plane Coordinate Transformation Process of GPS RTK[J]. Forest Engineering, 2010, 26(6): 39-42
Authors:Zheng Jiazhu  Zhao Gang  Chen Jian
Affiliation:(Nanjing Forestry University,Nanjing 210037)
Abstract:The coordinate transformation parameters between WGS-84 and the national or local coordinate should be calculated first when measuring GPS RTK.Aiming at the four-parameter conversion process of small regional areas,a simplified method was put forward and validated.It was found that the precision of this simple method was slightly better than the other means currently used when compared in the same conditions.Finally,when applying this method,the impact of the observation error of WGS-84 common point collection on the precision of coordinate transformation parameters was discussed,which had an instructive role in more conveniently operating RTK.
Keywords:GPS RTK  coordinate transformation  position error
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号