| 轮胎压出卷取装置的控制系统改进 |
| |
| 引用本文： | 张国幸,谭振玲. 轮胎压出卷取装置的控制系统改进[J]. 农业装备与车辆工程, 2009, 0(8): 62-63. DOI: 10.3969/j.issn.1673-3142.2009.08.020 |
| |
| 作者姓名： | 张国幸 谭振玲 |
| |
| 作者单位： | 1. 威海民航管理局机场建设管理处,山东,威海,264200
2. 山东高密润达机油泵有限公司,山东,高密,261500 |
| |
| 摘 要： | 传统上,轮胎成型机成型时仅胎侧采用卷取方式,胎面采用在压出冷却线上预裁断的方式.近几年,为了提高轮胎的动平衡,轮胎成型用的半成品部件越来越多地采用卷取的方式,现胎面也开始大量采用卷取方式.但使用原有的设备存在卷取的部件厚度变化较大时,卷取速度与生产线速度不匹配的问题,为此,提出了实现方式简单和改动很小的改进的措施.
|
| 关 键 词： | 卷取直径 速度匹配 PLC程序 控制系统改进 |
Modification of the Control System of Tyre Press-out and Winding Device |
| |
| ZHANG Guo-xing,TAN Zhen-ling. Modification of the Control System of Tyre Press-out and Winding Device[J]. Agricultural Equipment & Vehicle Engineering, 2009, 0(8): 62-63. DOI: 10.3969/j.issn.1673-3142.2009.08.020 |
| |
| Authors: | ZHANG Guo-xing TAN Zhen-ling |
| |
| Affiliation: | 1.Weihai Civil Airline Administration Bureau;Weihai 264200;China;2. Gaomi Renda Oil pump Co.;Ltd.;Gaomi 261500;China |
| |
| Abstract: | Traditionally, in modeling of tyre modeling machine, winding is adopted only at the tyre side, while for the tyre face, pre-cutting at the pressing-out and cooling line is used. Recently, to improve the dynamic balance of tyres, winding is used in more and more semi-finished products for tyre modeling, now also for tyre face. But when the thickness of the tyre changes a lot, the existing equipment has the problem of winding speed not matching production line speed, therefore, measures are given to make impl... |
| |
| Keywords: | winding diameter speed matching PLC program control system modification |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
