|
|||||
|
|
| 锯片铣刀变形、裂纹的分析与研究 | |
| 引用本文： | 倪志华,张志毅,郁超,王威,韩卫平.锯片铣刀变形、裂纹的分析与研究[J].内蒙古农业大学学报(自然科学版),2003,24(3):62-65. |
| 作者姓名： | 倪志华 张志毅 郁超 王威 韩卫平 |
| 作者单位： | 1. 内蒙古农业大学机电工程学院,呼和浩特,010018 2. 河北晶牛集团,邢台,054000 3. 呼市公交公司,呼和浩特,010010 |
| 摘 要： | 锯片铣刀在热处理过程中常有变形、裂纹现象发生。本文针对这种现象进行分析研究，对材料为W18CrV的锯片铣刀进行热处理和性能试验，根据产生变形、裂纹的原因，提出了有效的热处理方案，从而提高锯片铣刀的性能。 |
| 关 键 词： | 锯片 铣刀 变形现象 裂纹 热处理过程 性能试验 |
| 文章编号： | 1009-3575(2003)03-0062-04 |
| 修稿时间： | 2003年6月9日 |
THE ANALYSIS AND RESEARCH OF DEFORMATION AND FLAW ON SAW-TOOTH MILLING CUTTERS |
|
| NI Zhi- hua,ZHANG Zhi-yi,YU Chao,WANG Wei,HAN Wei-ping.THE ANALYSIS AND RESEARCH OF DEFORMATION AND FLAW ON SAW-TOOTH MILLING CUTTERS[J].Journal of Inner Mongolia Agricultural University(Natural Science Edition),2003,24(3):62-65. | |
| Authors: | NI Zhi- hua ZHANG Zhi-yi YU Chao WANG Wei HAN Wei-ping |
| Institution: | NI Zhi- hua~1,ZHANG Zhi-yi~1,YU Chao~2,WANG Wei~1,HAN Wei-ping~3 |
| Abstract: | The deformation and flaw of saw-tooth milling cutters happen frequently during the process of heat treatment. The problem was analyzed in this paper. The heat treatment, performance test on saw-tooth milling cutters made of W_(18)Cr_4V were performed respectively. The cause for deformation and flaw was found. An efficient heat treatment plan was proposed and the performance of saw-tooth milling cutters was improved. |
| Keywords: | saw-tooth milling cutter deformation flaw heat treatment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |