首页 | 本学科首页   官方微博 | 高级检索  
     

仿生波纹形开沟器减黏降阻性能测试与分析
引用本文:马云海,马圣胜,贾洪雷,刘玉成,彭 杰,高知辉. 仿生波纹形开沟器减黏降阻性能测试与分析[J]. 农业工程学报, 2014, 30(5): 36-41
作者姓名:马云海  马圣胜  贾洪雷  刘玉成  彭 杰  高知辉
作者单位:1. 吉林大学生物与农业工程学院,长春 130022; 2. 吉林大学工程仿生教育部重点实验室,长春 130022;;1. 吉林大学生物与农业工程学院,长春 130022; 2. 吉林大学工程仿生教育部重点实验室,长春 130022;;1. 吉林大学生物与农业工程学院,长春 130022; 2. 吉林大学工程仿生教育部重点实验室,长春 130022;;1. 吉林大学生物与农业工程学院,长春 130022; 2. 吉林大学工程仿生教育部重点实验室,长春 130022;;1. 吉林大学生物与农业工程学院,长春 130022; 2. 吉林大学工程仿生教育部重点实验室,长春 130022;;1. 吉林大学生物与农业工程学院,长春 130022; 2. 吉林大学工程仿生教育部重点实验室,长春 130022;
基金项目:国家科技支撑计划资助项目(2014BAD06B03);农业科技成果转化基金项目(2012GB23600635);吉林省科技发展计划项目(20120716, 20130101043JC)
摘    要:针对现有普通开沟器在工作过程中易粘土、阻力大等问题,提出一种仿生波纹形开沟器。该仿生开沟器依据土壤动物与生俱来的减黏脱土特性和超高分子量聚乙烯优异的减黏性能,在原有普通开沟器基础上进行设计制造。该文通过田间试验,将牵引阻力设为试验指标,使用正交设计检验仿生开沟器相对于普通开沟器减黏降阻的效果和探究仿生开沟器非光滑表面形态的减黏降阻机理。试验表明,仿生开沟器减黏降阻的效果高于普通开沟器9%左右;入土深度是影响开沟器牵引阻力的主要因素,其次是土壤湿度,工作速度影响最小;通过3因素4水平正交组合试验得出使用仿生开沟器的最优条件:土壤湿度达到16.3%,入土深度有6 cm,工作速度为1.8 km/h。仿生波纹形开沟器具有良好的减黏降阻效果,为后续的仿生开沟器或其他触土部件研究提供参考。

关 键 词:农业机械;仿生;试验;开沟器;减黏降阻;非光滑表面
收稿时间:2013-10-28
修稿时间:2013-11-28

Measurement and analysis on reducing adhesion and resistance of bionic ripple opener
Ma Yunhai,Ma Shengsheng,Jia Honglei,Liu Yucheng,Peng Jie and Gao Zhihui. Measurement and analysis on reducing adhesion and resistance of bionic ripple opener[J]. Transactions of the Chinese Society of Agricultural Engineering, 2014, 30(5): 36-41
Authors:Ma Yunhai  Ma Shengsheng  Jia Honglei  Liu Yucheng  Peng Jie  Gao Zhihui
Affiliation:1. College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China; 2. Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China;;1. College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China; 2. Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China;;1. College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China; 2. Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China;;1. College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China; 2. Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China;;1. College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China; 2. Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China;;1. College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China; 2. Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China;
Abstract:Abstract: Traditional furrow openers are lack of the ability of reducing resistance and clay adhesion. Hence, a kind of new bionic opener was designed and manufactured here based on characteristics of adhesion and resistance reduction of soil animals and ultra-high molecular weight polyethylene. Its tractive resistance was tested and compared with that of a traditional opener in an orthogonal (three factor and four level) designed field experiment in order to study the viscosity drag reduction mechanism of the bionic opener with non-smooth surface. Experimental results showed that clay adhesion on the traditional opener was not found when soil humidity was less than 16.3%, but obvious when soil humidity was more than 20.8%, while the adhesion on the bionic opener was little regardless of soil humidity. The tractive resistance of the bionic opener increased with increasing soil humidity when soil humidity was in a certain range. It was apparent that the traction resistance was mainly affected by the trenching depth, the soil humidity, and the forward velocity. Based on the related theory, the only velocity magnitude changes and the tractive resistance should be unaffected when the tractor is in a state of uniform motion. The impact of forward velocity on traction resistance and clay adhesion might because a number of conditions could not be completely controlled during the field test. In conclusion, the bionic opener was better in reducing adhesion and resistance than the traditional openers probably because: 1) the contact area with soil was smaller in the former than in the latter; 2) the former had corrugated non-smooth shape, which could form a cavity when contacting with the soil, result in a higher normal adhesion than tangential adhesion, destroying the adhesion interface and reducing the resistance; and 3) the former could cause larger stress fluctuation than the latter, and the fluctuation could partly destroy the continuity of the soil so that the barricade blocking and compaction were not easily formed. Furthermore, the bionic opener could work best in an optimal condition with soil moisture of 16.3%, the trenching depth of 6 cm and the forward velocity of 1.8 km/h.
Keywords:agricultural machinery   bionic   experiments   opener   reducing adhesion and resistance   non-smooth surface
本文献已被 CNKI 等数据库收录!
点击此处可从《农业工程学报》浏览原始摘要信息
点击此处可从《农业工程学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号