| 3种常用螺钉对家具用竹集成材面握钉力的研究 |
| |
| 引用本文： | 李吉庆,陈礼辉,苏团.3种常用螺钉对家具用竹集成材面握钉力的研究[J].福建林学院学报,2011,31(3):271-275. |
| |
| 作者姓名： | 李吉庆 陈礼辉 苏团 |
| |
| 作者单位： | 福建农林大学材料工程学院,福建福州,350002 |
| |
| 基金项目： | 福建省林业厅科学基金资助项目(022811); 福建省科技厅青年人才基金资助项目(2006F3011) |
| |
| 摘 要： | 以福建省建瓯市所产的毛竹片和低甲醛脲醛树脂胶黏剂为原料,采用正交试验法研究螺钉种类、导孔直径、拧入深度对家具用竹集成材面握钉力的影响.结果表明,螺钉种类对螺钉接合强度影响不显著,其中十字槽沉头自攻螺钉对其影响大些;导孔直径和拧入深度对螺钉接合强度影响显著;减小导孔直径、提高拧入深度能显著提高螺钉接合强度.
|
| 关 键 词： | 竹集成材 螺钉 接合强度 |
Study on bolt joint intensity of laminated bamboo for furniture |
| |
| LI Ji-qing,CHEN Li-hui,SU Tuan.Study on bolt joint intensity of laminated bamboo for furniture[J].Journal of Fujian College of Forestry,2011,31(3):271-275. |
| |
| Authors: | LI Ji-qing CHEN Li-hui SU Tuan |
| |
| Institution: | LI Ji-qing,CHEN Li-hui,SU Tuan(College of Material Engineering,Fujian Agriculture and Forestry University,Fuzhou,Fujian 350002,China) |
| |
| Abstract: | The influences of bolt joint factors on joint intensity of laminated bamboo for furniture were studied.The bamboo in Jian′ou City of Fujian Province and low-formaldehyde UF resin were used as main raw materials.Orthogonal design was adopted to analyze the influence of bolt category,diameter of guiding bore and screwing depth.The results showed that bolt joint intensity of laminated bamboo furniture were significantly affected by diameter of guiding bore and screwing depth,and were usually done by bolt category,which cross recessed pan head tapping screws was significantly affected than others.Bolt joint strength of laminated bamboo furniture was obviously increased in usage with the decreasing of diameter of guiding bore and the increasing of screwing depth. |
| |
| Keywords: | laminated bamboo bolt joint strength |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
