| 工艺参数对竹重组材性能的影响 |
| |
| 引用本文： | 李权,杨明杰,陈林碧,张惠敏. 工艺参数对竹重组材性能的影响[J]. 福建林学院学报, 2011, 31(2): 189-192 |
| |
| 作者姓名： | 李权 杨明杰 陈林碧 张惠敏 |
| |
| 作者单位： | 福建省永林竹业有限公司;国家人造板及林化工产品质量监督检验中心;广西大学林学院; |
| |
| 基金项目： | 国际科技合作项目(2008DFA30870) |
| |
| 摘 要： | 探讨了施胶量、含水率、密度、加热温度和加热时间等因素对竹重组材性能的影响.结果表明:(1)施胶量越高,产品的各项性能越好,采用10%施胶量生产的竹重组材的静曲强度(M0R)及弹性模量(MOE)超过混凝土模板用胶合板的最大指标值.(2)当竹束含水率从4%增加至24%时,产品的吸水厚度膨胀率(TS)逐渐降低,力学性能则先升...
|
| 关 键 词： | 竹重组材 工艺参数 性能 |
Effect of technological parameter on performance of recombined bamboo materials |
| |
| LI Quan,YANG Ming-jie,CHEN Lin-bi,ZHANG Hui-min. Effect of technological parameter on performance of recombined bamboo materials[J]. Journal of Fujian College of Forestry, 2011, 31(2): 189-192 |
| |
| Authors: | LI Quan YANG Ming-jie CHEN Lin-bi ZHANG Hui-min |
| |
| Abstract: | Effects of glue consumption,moisture,density,temperature and time on performance of recombined bamboo materials were esplored.The results indicated as follows:(1) The more glue consumption the better properties,using of 10% glue consumption produced the recombined bamboo materials whose modulus of elastic(MOE) and modulus of rupture(MOR) exceeded maximum value of poywood for concrete form.(2) The thickness swelling(TS) reduced and the MOR,MOE increased first and then decreased when the moisture increased fr... |
| |
| Keywords: | recombined bamboo materials technological parameter property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
