Abstract: | Physical and chemical methods were used to recover starch and protein from wet-milled corn fiber. A single milling of the fiber produced an 18% yield of mill starch. By separating the mill starch with a starch table, 68% of this material was recovered as starch with a protein contamination of 0.66%. Milling increased fine fiber from 4.5% in the starting material to 11.5% after a single grind. Successive additional milling passes modestly increased the mill starch and fine fiber yields with a corresponding decrease in the coarse fiber yield. Pretreatment with combinations of lactic and sulfurous acids had only a small effect on the distribution and composition of the recovered fractions. |