首页 | 本学科首页   官方微博 | 高级检索  
     

干燥过程中超低密度植物纤维材料的尺寸稳定性
引用本文:谢拥群,杨文斌,李求根,林小平. 干燥过程中超低密度植物纤维材料的尺寸稳定性[J]. 北京林业大学学报, 2008, 30(6): 124-127
作者姓名:谢拥群  杨文斌  李求根  林小平
作者单位:福建农林大学材料工程学院
基金项目:福建省自然科学基金项目
摘    要:因具有“桁架”网状结构的超低密度植物纤维材料在干燥过程中外形尺寸会产生改变,该文研究了干燥温度和应用模具对尺寸稳定性的影响。结果表明:干燥温度低于100℃时,尺寸收缩率与温度之间呈正相关,最大收缩率可超过5%;干燥温度超过100℃时,材料内部出现分层现象。材料置于模具中进行干燥可以消除水平方向的收缩,但高度方向的收缩率大于无模具干燥下的收缩率。 

关 键 词:干燥   植物纤维   超低密度   尺寸稳定性
收稿时间:1900-01-01

Dimensional stability of ultra-low-density plant fiber materials during drying process
XIE Yong-qun,YANG Wen-bin,LI Qiu-gen,LIN Xiao-ping.College of Material Engineering,Fujian Agriculture , Forestry University,Fuzhou,,P.R.China.. Dimensional stability of ultra-low-density plant fiber materials during drying process[J]. Journal of Beijing Forestry University, 2008, 30(6): 124-127
Authors:XIE Yong-qun  YANG Wen-bin  LI Qiu-gen  LIN Xiao-ping.College of Material Engineering  Fujian Agriculture    Forestry University  Fuzhou    P.R.China.
Affiliation:College of Material Engineering,Fujian Agriculture and Forestry University,Fuzhou,350002,P.R. China.
Abstract:Ultra-low density plant fiber material has a reticular structure with density ranging from 0.01 to 0.09 g/cm3. The size and shape of materials can alter during drying process. The effects of drying temperature and mould on dimensional stability were measured. The results indicated that a positive correlation between drying temperature and size shrinkage was found when drying temperature was below 100℃ and a maximum shrinkage was over 5%. When drying temperature increased over 100℃,internal splits could be observed. Drying the materials in a restricting mold diminished the horizontal shrinkage,and the vertical shrinkage was higher than that in the mold less drying.
Keywords:drying  plant fiber  ulxtra-low density  imension stability  
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《北京林业大学学报》浏览原始摘要信息
点击此处可从《北京林业大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号