Effects of peeling and steam-heating treatment on mechanical properties and dimensional stability of oriented Phyllostachys makinoi and Phyllostachys pubescens scrimber boards

Epidermal peeling treatment (EPT) and steam-heating treatment (SHT) are two popular pretreatments for bamboo processing. This study examined the effects of EPT and SHT on strength properties, profile density distribution, internal bond strength (IB), rate of springback, nail withdrawal resistance, and dimensional stability of oriented bamboo scrimber board (OBSB) made of moso bamboo (Phyllostachys pubescens Mazel) and makino bamboo (P. makinoi Hayata) strips. Results obtained using non-destructive testing (NDT) revealed that EPT for moso bamboo in the processing of OBSB caused lower ultrasonic-wave velocity (V_u) and dynamic modulus of elasticity (DMOE_u) parallel to the fiber direction, but higher V_u and DMOE_u perpendicular to the fiber direction. However, EPT slightly affected variations in modulus of elasticity (MOE) and modulus of rupture (MOR) of moso bamboo. In contrast, the effects of SHT on V_u and DMOE_u were inconsistent and insignificant among the OBSB samples. On the other hands, SHT caused increasing in MOE and MOR of OBSB, but leads to decrease in MOE and MOR of OBSB comprising bamboo strips after EPT. Both EPT and SHT contributed to more uniform profile densities in OBSB and had a positive impact on nail withdrawal resistance. EPT increased IB of moso bamboo and SHT enhanced IB of makino bamboo with epidermis only. Bamboo strips after SHT resulted in significant decrease in water absorption of all OBSB specimens. Reduction in swelling as a result of SHT not only improved the dimensional stability of OBSB but also enhanced strength.