| 夹具与槽口距离对胶合板强度测定结果的影响 |
| |
| 引用本文： | 付跃进,吕斌,唐召群.夹具与槽口距离对胶合板强度测定结果的影响[J].木材工业,2005,19(2):46-47. |
| |
| 作者姓名： | 付跃进 吕斌 唐召群 |
| |
| 作者单位： | 1. 国家人造板质量监督检验中心,北京,100091
2. 中国林科院木材工业研究所,北京,100091 |
| |
| 基金项目： | 中央级科研院所科技基础性工作专项基金 |
| |
| 摘 要： | 通过试验,研究了胶合板胶合强度检测试验中夹具与试件槽口的距离对胶合板胶合强度的影响.结果表明,当夹具与槽口的距离在0～40 mm内时,距离值与胶合强度检测值呈一定的线性相关.距离在0～15 mm区间,胶合强度随距离增大呈现增加的趋势,之后则逐步减小.相距15 mm时板的胶合强度最大(1.71 MPa),距离为40 mm时胶合强度最小(1.11 MPa).方差分析的结果表明,夹具与试件槽口的距离对胶合强度检测结果有显著的影响.
|
| 关 键 词： | 胶合板 胶合强度 距离 夹具 槽口 |
| 文章编号： | 1001-8654(2005)02-0046-02 |
Effect of Distance between Clamp and Cutting Notch on Plywood Bond Strength Testing |
| |
| FU Yue-jin,LU Bin,TANG Zhao-qun.Effect of Distance between Clamp and Cutting Notch on Plywood Bond Strength Testing[J].China Wood Industry,2005,19(2):46-47. |
| |
| Authors: | FU Yue-jin LU Bin TANG Zhao-qun |
| |
| Abstract: | An experiment was conducted to investigate the effect of the distance between clamp and cutting notch for plywood bond strength. The distance was continually changed from 0 to 40 mm in increments of 5 mm. Results showed that the bond strength values of plywood samples were closely related to the total distance with a linear tendency. When the distance increased from 0 to 15 mm, the bond strength increased along and hit the highest value of 1.71 MPa. When the distance kept increasing beyond 15 mm, the bond strength continued to decrease, and reached the lowest point of 1.11 MPa at the distance of 40 mm. Variance of analysis of the results also indicated a distinct relation between the distance and the bond strength of plywood. |
| |
| Keywords: | Plywood Bond strength Distance Clamp Cutting notch |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
