首页 | 本学科首页   官方微博 | 高级检索  
     

机插株距对优质食味水稻品种产量和群体质量的影响
引用本文:陈云,张亚军,张宏路,朱安,黄健,张耗,顾骏飞,刘立军,杨建昌. 机插株距对优质食味水稻品种产量和群体质量的影响[J]. 中国水稻科学, 2020, 34(6): 550-560. DOI: 10.16819/j.1001-7216.2020.0205
作者姓名:陈云  张亚军  张宏路  朱安  黄健  张耗  顾骏飞  刘立军  杨建昌
作者单位:1. 扬州大学江苏省作物遗传生理重点实验室/江苏省粮食作物现代产业技术协同创新中心,江苏扬州 225009;2. 扬州大学生物科学与技术学院,江苏扬州225009
基金项目:国家重点研发计划资助项目(2016YFD0300502,2017YFD0301206);国家自然科学基金资助项目(31871557,31671614);江苏省农业科技自主创新资金项目[cx(18)3007];江苏高校优势学科建设工程资助项目
摘    要:目的 机插密度对水稻产量和品质有重要影响,但机插株距对优质食味水稻品种产量与群体质量的调控作用尚不清楚。明确优质食味水稻品种的适宜机插株距可为水稻机械化高产优质栽培提供理论与实践依据。方法 以南粳9108、南粳5055和南粳46三个江苏优质食味水稻品种为材料,在机插行距固定为30 cm的情况下,研究了10、12、14、16和18 cm五种株距对上述水稻品种产量和群体质量的影响。结果 南粳9108、南粳5055和南粳46三个水稻品种的茎蘖成穗率、高效叶面积指数、粒叶比(粒重/叶面积)、抽穗后群体冠层净光合速率和抽穗至成熟干物质积累量均在株距为12 cm时最大。上述水稻品种产量均随株距增加呈现先增加先减少的趋势,产量与株距呈二次曲线关系。依据曲线方程计算出两年中南粳9108、南粳5055和南粳46高产最适株距分别为11.6 cm,11.6~12.3 cm和10.8~11.4 cm。结论 机插秧行距固定为30 cm时,11~12 cm的株距有利于改善优质食味水稻的群体质量指标并提高其产量,可作为江苏省代表性优质食味水稻品种的适宜机插株距。

关 键 词:优质食味水稻  机插秧  株距  产量  群体质量  
收稿时间:2020-02-18
修稿时间:2020-05-05

Effects of Plant Spacing on Grain Yield and Population Quality in Mechanically-transplantedRice with Good Tasting Quality
Yun CHEN,Yajun ZHANG,Honglu ZHANG,An ZHU,Jian HUANG,Hao ZHANG,Junfei GU,Lijun LIU,Jianchang YANG. Effects of Plant Spacing on Grain Yield and Population Quality in Mechanically-transplantedRice with Good Tasting Quality[J]. Chinese Journal of Rice Science, 2020, 34(6): 550-560. DOI: 10.16819/j.1001-7216.2020.0205
Authors:Yun CHEN  Yajun ZHANG  Honglu ZHANG  An ZHU  Jian HUANG  Hao ZHANG  Junfei GU  Lijun LIU  Jianchang YANG
Affiliation:1. Jiangsu Key Laboratory of Crop Genetics and Physiology/Jiangsu Co-Innovation Centre for Modern Production Technology of Grain Crops, Yangzhou University, Yangzhou 225009, China;2. College of Bioscience and Biotechnology, Yangzhou University, Yangzhou 225009, China
Abstract:【Objective】The mechanical transplanting density plays an important role in grain yield and quality in rice. However, the effects of plant spacing on grain yield and population quality ofmechanically transplanted rice with good tasting have not been clearly understood. Clarifying the optimal plant spacing for good tasting rice could lay a theoretical and practical basis for high yielding and good quality in mechanical cultivation.【Method】In this experiment, three rice cultivars with good tasting quality (Nanjing 9108, Nanjing 5055 and Nanjing 46) in Jiangsu Province were used as materials, and the effects of plant spacing (10 cm, 12 cm, 14 cm, 16 cm and 18 cm) on their grain yield and population quality were investigated under mechanical transplanting when the row spacing was fixed at 30 cm.【Result】Productive tillers rate, high efficientleaf area index, grain leaf ratio (grain weight/leaf area), canopy net photosynthetic rate after heading and dry matter accumulation from heading to maturity were the highest under the plant spacing of 12 cm in above three rice cultivars. Grain yields tended to increase at first and then decrease with the increase ofthe plant spacing, and the relationship of quadric curve was found between grain yield and plant spacing. The optimal plant spacing for grain yield in Nanjing 9108, Nanjing 5055 and Nanjing 46 ranged from 11.6 cm, 11.6–12.3cm and 10.8–11.4 cmin two years according to the curve equation, respectively.【Conclusion】When the row spacing was fixed at 30 cm, the plant spacing of 11–12 cm was helpful to improve the population quality and increase grain yield, and it could be used as the optimal plant spacingfor the typical rice cultivars with good tasting in Jiangsu Provinceunder mechanical transplanting.
Keywords:good tasting rice  mechanical transplanting  plant spacing  grain yield  population quality  
点击此处可从《中国水稻科学》浏览原始摘要信息
点击此处可从《中国水稻科学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号