| Abstract: | Zinc and aluminum ions as chloride or sulfate salts at 50–500 ppm metal ion (flour basis) had no detrimental effect on fermentation of yeastleavened dough. Increased mixing times (≈10–50%) due to addition of aqueous solutions of zinc (250–500 ppm) or aluminum (150–250 ppm) ions to a bread formula was overcome by withholding salt until the final mixing stage. Breads made from commercial flours (12.5% protein) containing zinc (250–500 ppm) or aluminum (150–250 ppm) ions and no oxidant had improved loaf volume and crumb grain when compared with control bread, and no off-taste. Additionally, breads with added zinc or aluminum had better crumb grains and slower firming rates when compared with breads containing optimum l -ascorbic acid (50 ppm) or potassium bromate (20 ppm). Breads made from commercial flours (11.1% protein) and three laboratory flours (11.4–13.6% protein) containing zinc (250 ppm) or aluminum (150 ppm) ions also had improved loaf volumes and crumb grains. Zinc or aluminum ions in combination with l -ascorbic acid, but not potassium bromate, had a detrimental effect on bread quality. Scanning electron microscopy of freeze-dried bread doughs revealed that zinc and aluminum ions enhanced the film-coating property of gluten. One serving (one slice, 28 g) of bread made with 250 ppm zinc ion would provide 25% of the adult recommended dietary allowance of zinc. |
