| 基于Solidworks和3DVIA Composer的外槽轮式排种器虚拟运动仿真与试验 |
| |
| 引用本文： | 王昕伟,常圣,鲍娜,贾晶霞. 基于Solidworks和3DVIA Composer的外槽轮式排种器虚拟运动仿真与试验[J]. 农业工程, 2014, 4(4): 125-128 |
| |
| 作者姓名： | 王昕伟 常圣 鲍娜 贾晶霞 |
| |
| 作者单位： | 1.中机美诺科技股份有限公司，北京100083 |
| |
| 基金项目： | “十二五”国家科技支撑计划项目(项目编号:2013BAD08B01) |
| |
| 摘 要： | 采用Solidworks设计软件的三维建模功能对外槽轮式排种器进行设计，将三维模型通过Solidworks软件与3DVIA Composer的数据接口将模型导入到3DVIA Composer软件环境中，通过渲染、虚拟装配和运动仿真等功能，对排种器的工作过程进行虚拟运动仿真和试验，直观掌握排种器的真实工作情况，为确保播种机的整机工作性能提供设计依据。
|
| 关 键 词： | Solidworks 3DVIA Composer 排种器 运动仿真 |
Movement Simulation of External Trough Wheel Seed Metering Device Based on Solidworks and 3DVIA Composer |
| |
| Wang Xinwei,Chang Sheng,Bao Na and Jia Jingxia. Movement Simulation of External Trough Wheel Seed Metering Device Based on Solidworks and 3DVIA Composer[J]. Agricultural Engineering, 2014, 4(4): 125-128 |
| |
| Authors: | Wang Xinwei Chang Sheng Bao Na Jia Jingxia |
| |
| Abstract: | Solidworks was adopted to design external trough wheel seed metering device.Three-dimensional model was lead to 3DVIA Composer by data joggle between Solidworks and 3DVIA Composer.It simulated the movement process and experiment of external trough wheel seed metering device by apply colors to model，assembly and movement simulation.Work situation could be known well and it could provide the basis for the planter in the future. |
| |
| Keywords: | |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《农业工程》浏览原始摘要信息 |
|
点击此处可从《农业工程》下载全文 |
