Development of a Model for Describing Accumulation of Color and Subsequent Destruction by Ozone in a Freshwater Recirculating Aquaculture System

The purpose of this study was to develop a mathematical model to assist in the determination of design numbers for color destruction by ozone as a function of feed rate. A mass balance model was developed that takes into account methods of introduction and removal of color, including removal by ozone. Because direct measurement of color mass or concentration is difficult, a representative unit was developed during this study called the color mass equivalent (CME). The CME represents a direct measurement of absorbance at 436 nm, which is a unitless measurement, multiplied by the system volume. The CME is directly proportional to the true concentration of color causing compounds at that wavelength. Once the model was developed, two studies were run to test the model. A 1,500-L recirculating fish system was set up with a 57-L bead filter and six 1-L fluidized sand beds. Approximately 45 kg of channel catfish Ictalurus puncfatus were placed in the system and fed 0.25 kg of 32% protein feed per day (0.55% body wt.). Once the system reached stable conditions, the system was flushed with clean water and samples were taken to estimate the accumulation rate of color in the system. After 5 wk, an ozone unit was activated and samples were taken to determine the destruction rate for color. Once an accumulation rate had been determined, a second study was performed to corroborate this value. The same ozone unit was installed on a 5,000-L recirculating fish system being fed 0.49 kg per day with a 171-L bead filter. Samples were taken to determine the destruction rate for color. The accumulation rate for color was 12.6 CME/kg feed and the destruction rates were 1.7 CME/g O₃ in the first study and 0.82 CMWg O₃ in the second study. This calculates to a range of 7 to 15 g O₃/kg feed to remove the color produced by the feed.