| 纳米复合镀层与微米及普通镍磷合金镀层性能的比较研究 |
| |
| 引用本文： | 李佳民,王彦梅,张兆国. 纳米复合镀层与微米及普通镍磷合金镀层性能的比较研究[J]. 安徽农业科学, 2006, 34(23): 6387-6388,6390 |
| |
| 作者姓名： | 李佳民 王彦梅 张兆国 |
| |
| 作者单位： | 1. 罗定职业技术学院,广东罗定,527200
2. 东北农业大学,黑龙江哈尔滨,150001 |
| |
| 摘 要： | 对普通Ni-P合金镀层、微米SiC化学复合镀层及纳米SiC化学复合镀层的镀态硬度和热处理硬度进行了比较研究。通过耐磨性试验对3种镀层的磨损量和磨痕宽度进行了对比,通过扫描电镜对3种镀层的磨痕形貌进行了比较研究。结果表明:纳米SiC复合镀层的耐磨性优于微米SiC复合镀层和普通Ni-P合金镀层。
|
| 关 键 词： | 纳米SiC复合镀层 镀层硬度 耐磨性 Ni-P合金 |
| 文章编号： | 0517-6611（2006）23-6387-02 |
| 收稿时间： | 2006-08-15 |
| 修稿时间： | 2006-08-15 |
Comparative Study on the Performance of Nanometer Composite Coating, Micron and Ordinary Ni-P Alloy Layer |
| |
| LI Jia-min et al. Comparative Study on the Performance of Nanometer Composite Coating, Micron and Ordinary Ni-P Alloy Layer[J]. Journal of Anhui Agricultural Sciences, 2006, 34(23): 6387-6388,6390 |
| |
| Authors: | LI Jia-min et al |
| |
| Affiliation: | Technological Institute of the Job of Luoding, Luoding, Guangdong 527200 |
| |
| Abstract: | The Comparison experiment in plating hardness of the ordinary Ni-P alloy-coating,micron SiC-chemistry compound-coating and nanometer SiC chemistry compound-coating before and after heat treatment was conducted.The abrasion quantity and the width of milling mark were studied and compared through the experiment in wear-resistant of three kinds of coatings.The comparison research on the wear was morphologically conducted through the scan-ning electricity mirror of three kinds of coatings.The result indicated that the resistance of nanometer SiC compound coating to wear surpassed a micron compound coating and ordinary Ni-P alloy coating. |
| |
| Keywords: | Nanometer SiC composite coating Hardness of coating Wear ability Ni-P alloy |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
