首页 | 本学科首页   官方微博 | 高级检索  
     

轴-轴承系统强度和刚度与摩擦学的耦合分析
引用本文:孙军 桂长林 汪景峰 李震 李志远. 轴-轴承系统强度和刚度与摩擦学的耦合分析[J]. 农业机械学报, 2005, 36(10): 125-129
作者姓名:孙军 桂长林 汪景峰 李震 李志远
作者单位:[1]合肥工业大学机械与汽车工程学院教授,合肥市230009 [2]合肥工业大学机械与汽车工程学院教授,合肥市230009 [3]合肥工业大学机械与汽车工程学院硕士生,合肥市230009 [4]合肥工业大学机械与汽车工程学院博士生,合肥市230009
基金项目:国家自然科学基金资助项目(项目编号:50175023)
摘    要:分析了轴-轴承系统中,当轴受载变形导致轴颈倾斜时,径向滑动轴承的流体动力润滑特性。计算结果表明,此时的轴承油膜压力明显偏布且最大油膜压力增大。在轴承润滑分析的基础上,将得到的轴承油膜压力作为载荷边界条件,计算了轴的应力分布。结果显示此时轴的应力分布在轴承最大油膜压力作用的邻近区域发生了明显变化,应力数值有较大增加,影响轴的强度。

关 键 词:轴-轴承系统  强度  刚度  摩擦学  耦合
收稿时间:2004-06-07
修稿时间:2004-06-07

Coupling Analysis on Strength, Stiffness and Tribology of Shaft-bearing System
Sun Jun;Gui ChangLin;Wang JingFeng;Li Zhe;Li ZhiYuan. Coupling Analysis on Strength, Stiffness and Tribology of Shaft-bearing System[J]. Transactions of the Chinese Society for Agricultural Machinery, 2005, 36(10): 125-129
Authors:Sun Jun  Gui ChangLin  Wang JingFeng  Li Zhe  Li ZhiYuan
Affiliation:Hefei University of Technology
Abstract:Hydrodynamic lubrication characteristics of a journal bearing considering misalignment caused by shaft deformation were analyzed in shaft-bearing system. There was obvious offsetting distribution of film pressure and increase of maximum film pressure on this condition. Based on lubrication analysis of journal bearing, the stress distribution of shaft was calculated by using film pressure that calculated as boundary condition of load. The results showed that there was obvious change with stress distribution and greatly increasing of stress near the district acted by maximum film pressure. The strength of shaft would be affected remarkably.
Keywords:Shaft-bearing system   Strength   Stiffness   Tribology   Coupling
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号