| 拖拉机整机控制器CCP标定系统分析与实现 |
| |
| 引用本文： | 聂林同,李军伟,姜世腾,阚辉玉.拖拉机整机控制器CCP标定系统分析与实现[J].农业装备与车辆工程,2021(1). |
| |
| 作者姓名： | 聂林同 李军伟 姜世腾 阚辉玉 |
| |
| 作者单位： | 山东理工大学交通与车辆工程学院 |
| |
| 基金项目： | 国家重点研发计划项目(2016YFD0701101)。 |
| |
| 摘 要： | 针对某重型拖拉机VCU(Vehicle Control Unit,整机控制器)的参数监测与标定需求,进行了基于CAN标定协议(CAN Calibration Protocol,CCP)的标定系统开发。选取了通信硬件,编写了标定系统的底层驱动程序和上位机标定软件。采用本系统对VCU的有关参数进行了标定实验。实验结果表明,所开发的标定系统能够实现对指定参数的监测与标定功能,达到了设计要求。
|
| 关 键 词： | 拖拉机 VCU CAN标定协议 标定系统 |
Analysis and Implementation of CCP Calibration System for Tractor Controller |
| |
| Nie Lintong,Li Junwei,Jiang Shiteng,Kan Huiyu.Analysis and Implementation of CCP Calibration System for Tractor Controller[J].Agricultural Equipment & Vehicle Engineering,2021(1). |
| |
| Authors: | Nie Lintong Li Junwei Jiang Shiteng Kan Huiyu |
| |
| Institution: | (School of Transportation and Vehicle Engineering,Shandong University of Technology,Zibo City,Shandong Province 255049,China) |
| |
| Abstract: | To meet the parameter monitoring and calibration requirements of a heavy-duty tractor VCU(Vehicle Control Unit),a calibration system based on the CAN Calibration Protocol(CCP)is developed.The communication hardware is selected,and the low-level driver of the calibration system and the calibration software of the host computer are written.This system is used to carry out calibration experiments on the relevant parameters of VCU.The experimental results show that the calibration system developed in this paper can realize the monitoring and calibration functions of the specified parameters and meet the design requirements. |
| |
| Keywords: | tractor vehicle control unit CAN calibration protocol calibration system |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
