| 基于ST2和ADAMS的圆锯机进料夹紧机构动态仿真与优化 |
| |
| 引用本文： | 王毅亮,马岩,张自鹏,张汉召. 基于ST2和ADAMS的圆锯机进料夹紧机构动态仿真与优化[J]. 林业机械与木工设备, 2011, 39(5) |
| |
| 作者姓名： | 王毅亮 马岩 张自鹏 张汉召 |
| |
| 作者单位： | 东北林业大学,黑龙江,哈尔滨,150040 |
| |
| 摘 要： | 进料夹紧机构是双工位截段圆锯机的关键组成部分,在工作过程中由于工作频繁致使其非常容易损坏.采用ST2建立三维模型导入虚拟样机仿真软件ADAMS对进料夹紧机构进行仿真,以确定进料夹紧机构中弹簧的扭矩及变形曲线,并对弹簧进行优化选择,分析其受力状态及使用寿命,为设计合理的进料夹紧机构提供理论依据.
|
| 关 键 词： | 进料夹紧机构 动态仿真 优化 |
Dynamic Simulation and Optimization of the Circular Saw Feeding and Clamping Mechanism Based on ST2 and ADAMS |
| |
| WANG Yi-liang,MA Yan,ZHANG Zi-peng,ZHANG Han-zhao. Dynamic Simulation and Optimization of the Circular Saw Feeding and Clamping Mechanism Based on ST2 and ADAMS[J]. Forestry Machinery & Woodworking Equipment, 2011, 39(5) |
| |
| Authors: | WANG Yi-liang MA Yan ZHANG Zi-peng ZHANG Han-zhao |
| |
| Affiliation: | WANG Yi-liang,MA Yan,ZHANG Zi-peng,ZHANG Han-zhao(Northeast Forestry University,Harbin Heilongjiang 150040,China) |
| |
| Abstract: | As a key component of a circular saw with double work stations and cut segment,a feeding and clamping mechanism is a vulnerable part because of working frequently in the process of operation.ST2 is used to establish a 3-dimension solid model which is imported to ADAMS simulation software of a virtual prototype to simulate its feeding and clamping mechanism in order to determine the torque and the deformation curve of the spring in the feeding and clamping mechanism,to optimize and choose the spring used for... |
| |
| Keywords: | ST2 ADAMS |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
